Deploy 7
Deploying Windows 7
644 topics in this forum
-
This demonstration shows how to capture a custom Windows system image using the System Preparation Tool (sysprep) to generalize the installed image and ImageX to capture the contents of the generalized system image for re-deployment to other computers - including different hardware types. September 2009 If you've installed Silverlight, you can click the Play button in the video player at left. Or, right-click (Save Target As...) the link below to download. Video Download: WMV Length: 1 minute 50 seconds via > http://technet.microsoft.com/en-us/windows/ee530017.aspx
-
- 1 reply
- 7.2k views
- 1 follower
-
-
Last Feb Brandon posted a piece on Language Pack availability for Windows 7 here. I have had a lot of questions from IT pros in the past few weeks that are deploying Windows on where to find them so we thought we’d resurface this important topic and resources. Windows 7 will continue to enable the widest range of people across the world to use Windows in their own language by providing Language Interface Packs in over 55 languages. LIPs are built using MUI technology and provide translation of the UI (User Interface) most commonly used by Windows users. LIPs do not require a separate software license. They are available to downloaded for free and installed on any edi…
-
- 0 replies
- 3.8k views
-
-
Hi I am trying to deploy a captured WIM image (manually installed Win7, installed apps, some security settings etc) using the SCCM 2007/MDT 2010 but after I get pass the PXE boot I see the regular "SCCM Welcome...." screen, then "Preparing Network settings...." box and then first that dialog box disappears and then the "SCCM ...." background image and PC reboots and nothing gets installed. Here is my environment: SQL Server 2005 is on one box And the following are on another box Windows Server 2008 Standard SCCM 2007 R2 SP2 MDT 2010 WDS WAIK Operating System Image and setup files added (in ConfigMgr) WDS installed (but not configured...left every…
-
- 2 replies
- 4.6k views
-
-
Hi I am trying to deploy a captured WIM image (manually installed Win7, installed apps, some security settings etc) using the SCCM 2007/MDT 2010 but after I get pass the PXE boot I see the regular "SCCM Welcome...." screen, then "Preparing Network settings...." box and then first that dialog box disappears and then the "SCCM ...." background image and PC reboots and nothing gets installed. Here is my environment: SQL Server 2005 is on one box And the following are on another box Windows Server 2008 Standard SCCM 2007 R2 SP2 MDT 2010 WDS WAIK Operating System Image and setup files added (in ConfigMgr) WDS installed (but not configured...left every…
-
- 1 reply
- 5.9k views
-
-
When deploying Windows, is there a way to format the first partition rather than the entire drive?
-
-
- 2 replies
- 4.4k views
-
-
Looking to install IIS during my task sequence, but I don't see that option for Windows 7. -Only Server. Is there a way to do this? I'm running SCCM SP2.
-
- 1 reply
- 3.6k views
-
-
Hi, I'am new in this forum and it is the first time that i have worked with SCCM. I have 3 virtual machines. The first one is the domaincontroller with DHCP and DNS Server. The second one is the SCCM Server with SCCM 2007 R2 and SQL Server. The third machine is the client and I want to deploy Windows 7. When I start the client Windows Pe is loaded via PXE boot. After Windows Pe is loaded it shows the SCCM screen with a window which says "Windows is starting up...". The Harddrive loads a few time and the window disappears -> nothing happens. Ipconfig shows the following information: IPv4 Address: 192.168.0.15(Preferred) DHCP enabled: Yes Subent Mask: 255.2…
-
-
- 4 replies
- 4.5k views
-
-
First, Hello Everyone. I have used all the helpful info i have found here on Windows-noob.com to get my mind wrapped around deploying windows. I am having a couple problems with the installation of Symantec Endpoint Protection during my deployment. I have trying deploying it in two different ways: 1. By creating a software package 2. scripting it into the runonce key so that it runs after windows reboots. The first fails because after SEP installs it starts to run live update and forces my Task sequence to time out. The second doesn't work because when the script tries to write to the runonce key I get an access denied error. Also after my OS Tas…
-
- 7 replies
- 5.7k views
- 1 follower
-
-
I have SCCM SP2 R2 Installed and I am taking a stab at deploying Windows 7. I have followed the step-by-step guide for deploying it (posted on this site) and I am getting stuck. I am not using PXE. I have created the USB bootable thumb drive and have copied the boot.wim over to it that I created in SCCM. It boots fine and starts up the SCCM OSD process but after about a minute it just restarts. It doesn't even format the drive. Here is the TaskSequenceProvider.log file from the SCCM box (is there somewhere else to look for troubleshooting?) <![LOG[[PID: 26192] Invoking method SMS_TaskSequence.ExportXml]LOG]!><time="15:50:35.430+300" date="07-19…
-
- 10 replies
- 24.6k views
- 1 follower
-
-
I setup a distribution point for a remote site. It has all the required packages needed for the task sequence but for some reason it is only using some of the packages from the local distribution site and coming back to our main office to get the other half of them. Both sites the main and the remote distribution are protected DP's and they are in separate subnets. Anyone have any idea why this would happen?
-
- 7 replies
- 6.3k views
-
-
OS: Windows 7 Enterprise 64 bit HW: HP 8100 Elite Small Form Factor I am trying to run sysprep on Windows 7 Ent 64bit computer and I am getting this error: "A fatal error occured while trying to sysprep the machine" A little background of this Image:I installed Windows 7 Ent 64bit from a Microsoft DVD, installed my applications etc, ran the sysprep, created a WIM file and named it Win7_ent_64bit_Sales.wim. No issues in creating this image. Now I am trying to create another image (lets say for HR Dept that will have HR specific applications) using Win7_ent_64bit_Sales.wim and I do not get any issues in deploying this image to the same hardware. When I try…
-
- 3 replies
- 106.8k views
-
-
I had very unpleasant situation last week. I was deploying Windows 7 (XP to 7 upgrade with hardlinking USMT) on machine with 2 physical drives. It was the first machine with 2 physical drives we deployed OS with SCCM on. The OS image was applied to the wrong physical drive and as you may guess, caused data loss of that employee. After trying to reproduce the situation, what i've seen was that after the machine boots to WinPE, it decides to switch by himself between the drives. The first HDD becomes second, and the second first, and that way the image was applied to the wrong destination. In TS the apply image is set to apply the image to the first available partit…
-
- 3 replies
- 4.5k views
-
-
Hi All, Things have been going really good with my packages and OSD. Until.... Someone comes along with a new model of pc - Dell Optiplex 980. I go to dell get all the 32 and 64 bit drivers and do the usual import and package for the drivers within SCCM. DP's are up to date. Then go for a test OSD on the 980 The 980 doesnt OSD as per all my other dell machines i have in SCCM. It fails. I will look into this.... I then go back and test a dell 960 which WAS working fine, and its works fully, however now comes up with an Administrator credentials prompt box after successfully installing via osd, all software is installed. Further investigation reveals that…
-
- 2 replies
- 4.9k views
-
-
I tried to deploy my task sequence with windows 7. The Client machine booted correctly from PXE and has a connection to the sccm Server. Then it runs the "Initializing Windows PE" After that for just a second the message "Preparing Network configuration" apears, than it cancelled the process. One time it runs fine and then this problem... We build the Drivers, drivers package, task sequence, advertisement, collections new... We restarted the server many times... Has anyone an idea?
-
- 7 replies
- 6k views
-
-
Hi all - I am having great success with SCCM and OSD. I now have 32 and 64 bit windows PXE'ing. It also installs some core applications (office / adobe reader / av software ) as part of task sequence and works a treat. However something i didnt really check is the language settings / keyboard etc. It has come to pass that anything i deploy is set to English(united states) - whereas i want it to be ENGLISH (United kingdom) I have read articles here about knocking up an unattend.xml and packaging it as part of the deploy TS. Is this the way to do it ? Anyone know if this is the way forward - i guess im just looking for reassurance before i give it a go. …
-
- 6 replies
- 7k views
-
