Deploy 7
Deploying Windows 7
644 topics in this forum
-
Hallo, I'm in process of deployment Windows 7 OS, exisitng computers with Win XP have one HDD disk0, currently there is two partition C: has 98 GB and D: have the rest drive is I think entire hdd has 232 gb. I need to build and capture image with windows 7. How to configure task sequence to retain former hdd structure and leave user data on D: drive and only format existing c: volume?
-
- 2 replies
- 9.7k views
-
-
When running a tsak sequence for OSD, it fails on Formatting C. This task sequence has been running fine with no errors. When I booted to Windows PE and partition the drive, it fails when i try to format it manually saying "diskpart has encountered an error: the parameter is incorrect". I cannot seem to format the drive. Any help would be great.
-
- 2 replies
- 3.9k views
-
-
Hi all, We're in front of a problems, and hope that someone could help us. We're deploying windows 7 using sccm R2. We have a custom task sequence and we noticed that software deployment are messed up due to .net framework 4. We would like to install .net framework 4 during the osd, then, a task sequence to reboot, and then, continue to install other softwares. Is it possible to do this, i mean, deploy a software, reboot, and then, continue the task sequences ? Many thanks in advance.
-
- 13 replies
- 29.8k views
-
-
Hi first of all wonderfull forum with alot of info second i wanted to get your opinion on something i ran a poc (on vmware workstation) i installed a windows 7 ultimate x86 computer with office 2010(no sccm client) and used the capture cd to capture the image and import it to sccm. i than ran the mdt 2010 client task sequence and wanted to "refresh" an xp machine(with sccm client and lots of docs and settings) to windows 7 at first this failed after booting to winpe because of network issues, i changed the network card to be E1000 and it fixed the problem and continued. eveeyrhing seems to go ok(apply os ...). but after appying the windows 7 image(i verified its …
-
- 1 reply
- 2.9k views
-
-
In the "Deploy Windows 7 Part 1 Build and Capture" you mention a step of "click browse and pick your configmgr Client Installation Package (from definition) which we created before," but I cannot find the thread where this was created. If I go to create a new package by definition, I don't have the option of installing a new client. Any help is much appreciated. I've attached a screen shot of what I see when I try to create the client installation package.
-
- 1 reply
- 4k views
-
-
As you can imagine, virtualized desktops is the "IN" thing at the moment and utilizing a wide range of toolsets and infrastructure. Is anybody else building these solutions at this time? One of the few "regular" requests to my organization is for better governance and control over the IT environment in the customers Offshore (and onshore) Service Desks, Corporate Entities and their Subsidiaries. Generally this will fall down to the below arguments... - No Consolidated governance of the individual companyInfrastructure - No asset management of Software, hardware and compliance. - A lack of IT resources to effectively manage theEnterprise Infrastr…
-
- 6 replies
- 5.1k views
-
-
Hi Guys, Can i create a database to save the desktop's informations for deploy Windows (Seven) via OSD (SCCM 2K7). For example: - Hostname - Mac Adress or/and Serial Number - Target Organisation Unit in Active Directory. OSD will must check this database et take the informations (hostname, OU etc...) to deploy Windows ! It's Possible ? How i can do ? Thanks all ! ps: sorry for my english
-
- 2 replies
- 3.1k views
-
-
Hi, I'm having an other question. When I deploy my Reference image (Windows 7 Ent with the Language Pack installed.) The Deployment task sequence pause when this screen appear << Set UP Windows Ma langue est: francais My language is English. >> I have to manualy select the language and click next, after that my task sequence complete successfully. I want to automate this task but since I'm pretty new in this world of workstation deployment, I have no idea where to start looking at... Is it at the task sequence "Apply Operating System" and at the section "Use an unattended answer file" I have to work on... ?
-
- 2 replies
- 5.6k views
- 1 follower
-
-
I keep getting the following error message at the Prep and Capture OS portion of the task sequence: "A Failure code od 16389 has returned" The task sequence execution engine failed executing the action (Prepare OS) in the group (Capture the Reference Machine) with the error code 2 Action output: urce.cpp,3031) TS::Utility::ResolveSource(pszPackageId, rsPackagePath), HRESULT=80070002 (e:\nts_sms_fre\sms\framework\tscore\bootimage.cpp,1002) BootImage::ResolveImageSource( pszPackageId, sImagePackageSourcePath, sImageSourcePath), HRESULT=80070002 (e:\nts_sms_fre\sms\framework\tscore\bootimage.cpp,687) TS::Boot::BootImage::StageBootImage(sPkgID), HRESULT=80070002 (…
-
- 4 replies
- 6.4k views
-
-
Hi, I'm having a problem when deploying my Windows 7 Pro image to my computers. I have successfully build and captured a Windows 7 Pro image on my virtual machine. Also deployed the image with success. Now I'm trying to deploy this image to a real computer and it works fine except for the small detail, that during the deployment Windows 7 pops up the following dialog box: and the deployment stops until I have selected whatever timezone I need. This dialog box does not appear when deploying the image to a virtual machine. How can I avoid this? TIA nimmer
-
- 5 replies
- 6.3k views
- 1 follower
-
-
Greetings to all, We are currently working on Windows 7 Enterprise Deployment across the board. We have only Dell Laptops and HP Workstations. We would like to have 1 base image for both Hardware. We do have MDT 2010 and SCCM 2007 SP2 here. Do you all have any guides on how to go about doing it? Can I use Task Sequences to install the drivers based on which machine I'm deploying the OS to? (Dell or HP)? Your help will be greatly appreciated.
-
- 1 reply
- 3.5k views
-
-
I am currently using MDT to deploy my images across the corporation. I like how the interface is for the installation of the image, is there a way to make SCCM's like this? My sites have local people that are imaging computers but IT isn't their primary role. It is nice to have them see the images they can choose and then have it ask them for the computer name and give them the option to change the OU (this one is mostly nice for the main IT department if they are putting an image on a computer that belongs to a different site) and/or domain, and change the time zone. Is there a way to make it so that SCCM asks this information as well? Also, my IT support will r…
-
- 1 reply
- 4.3k views
- 1 follower
-
-
I have been tasked with getting OSD up and running at our company. I have been able to deploy a captured Windows 7 image, name the newly loaded PC and join the domain, install the SCCM client, and all other necessary tasks to get our users up and running quickly after the upgrade from XP. We were not planning on using USMT at all, because of the fact that we have a semi-strict policy against saving data locally as opposed to their home directories on the network. That has changed, and now I am trying to get through configuring USMT and get it to work in my already successful TS. I have a created my USMT package, added the appropriate steps in my TS, and had a few runs at …
-
- 0 replies
- 2.8k views
- 1 follower
-
-
Hi How do I create separate collections for Windows 7, Domain controler (Server 2008 R2 Ent) and member servers (Server 2008 R2 Ent)? Thanks.
-
- 1 reply
- 3.4k views
- 1 follower
-
-
HI, I have been successfully bitlocking computers from SCCM for a while now, but I upgraded to SCCM 2007 R" yesterday, and since then, it has failed on every single onw. The SMSTS.log file states that there is no compatible TPM chip on the machines, but there is and they are enabled from the bios. I'm beginning to get frustrated now as it was all working fine. Also, now I have one specific model that cannot PXE boot either, it says BCD\Boot, the the boot image does not have a valid OS entry. It boots all my other models of laptops fine, except one, which did work before the upgrade. Thanks
-
- 0 replies
- 2.9k views
-
