Skip to content

Deploy 7

Deploying Windows 7

  1. we are in the process of testing a windows 7 inplace upgrade using SCCM, and an advertised TS. On some test machines, i can not get the advertisement to run again when readvertised to them. I have deleted registry keys that were suggested to delete on the client machines, but they still do not see the advertisment after repolling policies and going to run advertised tasks. Any suggestions how to get them to rerun? i am running out of machines to break... lol

  2. Started by pwolf,

    So I have setup a Task sequence to install Windows 7. Everything works fine until I get to the Install Software tasks. The Setup Windows and ConfigMgr task runs and then reboots the system into the OS but the Install Software tasks never run. What am I doing wrong.

  3. Started by ADB,

    Hi everyone My Client starts the TS and when trying to load NW-Drivers it is interrupted! My Log File sais: - Failed to get Client Identity ....HRESULT: 80072ee7 - sending with winhttp failed...failed to send the request - ClibSMSMessageWinHttpTransport::Send: URL: SCCM-TEST.SERVICE.TEST:80....Error. Received 0x80072ee7 from WinHttpSendRequest... When I open the command prompt on the client and type ipconfig /all there's a strange DNS IP Address (looks like IPv6) has anyone had a similar issue? My drivers should be the right ones and are updated on DPs. But anyways, it doesn't look like a Driver-problem... My DNS Server and the DHCP Server have…

    • 7 replies
    • 7.7k views
  4. Started by DJNova,

    Hello, I have a problem with the customized deployment of my Windows 7 Enterprise. I want to deploy the standard image from the source directory and configure it like it's described here. I have also added the Windows Foundation-Package to enable end disable some features. But it's not working. Is there any possibility to solve this problem without capturing a reference machine? The part with the language settings is working, but not the part with the disabled features. This is my XML with the informations: <?xml version="1.0" encoding="utf-8"?> <unattend xmlns="urn:schemas-microsoft-com:unattend"> <servicing> <package acti…

    • 6 replies
    • 6.9k views
  5. When deploying Windows 7 the Network Location dialog box is sometimes shown even though the machine is joined to a domain. It's only on specific hardware but it's quite common. Microsoft now has a hotfix (KB 2028749) for the network lcoation bug, the hotfix is not yet public, you have to call Microsoft Support to get it. via > http://www.deployvista.com/Blog/tabid/70/EntryID/136/language/en-US/Default.aspx reference > http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/57e36e94-5ccb-49c5-973e-04b6f7dd65ec

    • 0 replies
    • 4k views
  6. Started by ogeccut,

    If i am posting in a wrong section please forgive me. I am looking for some help with setting GPO for IE8 or "migrating old GPO from IE6" Is there a process of migrating? Or setting test GPO for IE8? Converting current .adm files "inetres.adm" to .admx and copy to %SystemRoot%\system32\GroupPolicy\Adm" on windows 7 for testing is enough? Please point me in a proper direction. Thank you.

  7. Started by ADB,

    Hi all I've successfully captured my custom Windows 7 32Bit reference machine. Now I'm trying to deploy it on a physical machine. Is it going to deploy the partitions, Userprofiles etc as i captured it or do i have to redo this in MDT and SIM? So i ipmorted the the captured image into MDT and created a TS. When i try to edit the Unattend.xml file i'ts unable to generate or locate the catalogue file. Unfortunately I'm talking about my CAPTURED image, which I can't move to the source folder of the OS-InstallPackage. 1: How can i edit my Captured .wim for mapping drives, configuring IE and so on... 2: PX:E53 Error (no Bootfile Name) when deploying the TS …

    • 4 replies
    • 5.7k views
  8. I have a few remote offices that do have maybe one server acting as DC and FileServer, I have enabled these offices to be branch distribution points. I would like these offices to support also the PXE role, but the MS documents state that adding a PXE service point to a branch distribution point is not supported. Anyone know why this is? and any ideas on how it would be possible to enable these remote offices to support pxe boot?

    • 0 replies
    • 4.5k views
  9. Started by Rick,

    Hello all hopefully someone can pointme in the right direction with the issue I am running into. Does anyone know how to deploy a custom image that has had the user profile moved from the system drive to the a second partition ( D: ). I have captured the image but am unable to deploy it via SCCM or MDT. MDT give me the error " Windows could not apply unattend settings during the pass {offline Servicing } Config manager fails at intalling drivers. Any help or direction would be greatly appreciated. Thanks, Rick

    • 2 replies
    • 3.9k views
  10. Started by suspected,

    Hi Guys, i got some problems. we got 6 different types of machines in our testlab... now i want to use just 1 TS for build all systems with windows 7, but i have driver problems. so my question is can i place all 6 HardDisk drivers for each of that machines in mine BUILD TS ??? how can i make that the Driver step in the TS searches himself the right driver for each machine so f.e. i advertise the TS to all 6 machines, now he's installing a SIEMENS FUJITSU machine with that TS, how can i make that the step of the TS (Drivers) see ""ok this is a siemens fujitsu machine, i have to give him this driver"" is that possible ?? otherwise i have to make 6 TS for eac…

  11. Started by steve_nrw,

    Hello Guys! I've got a problem. I created a Software Package (Office 2007) and a Program. Both are shown in Packages. If i try to add the package in my Task Sequence i see the Package but not the Program, so i cant save the TS. I hope you can help me. Thanks! steve_nrw

    • 5 replies
    • 5k views
  12. Started by boognish,

    Is there absolutely no way to advertise an OSD task sequence to a AD security group of users? For example, if a company has group of Technicians that you want to advertise to so they can use them while out in the field. They would log in and be able to run the advertisement. http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/dedf6a8d-a80c-4cf0-b169-2ff0532c4aa6#d1c15208-e1b5-4dfc-88c6-99c528ba6cdd

    • 1 reply
    • 3.9k views
  13. Hi guys, Can someone help me on this error that Im getting? I have configured everything is instructed on the deploy windows 7 pagew however im getting the following error:]Windows PE cannot start because the actual SYSTEMROOT directory(X:\Windows) is different from the configured one (x:\Windows~BT\Windows). This can be configured with the dism /set-targetpath command. Please consult the documentation for more details. Press the OK button or close this message to reboot Where do i go from here? Im dying here

    • 14 replies
    • 11k views
  14. Started by ogeccut,

    Hello, Not sure if i am posting this in the right place. I am trying to do a ZTI. And i am getting as far as "Set Up Windows" screen. 1. Then i am prompted for region and time and keyboard. 2. User name and PC name and pwd windows for user name. 3. License agreement window. 4. Update setting window. 5. Time and date settings. 6. And select your computer "network" location. I have Time Zone set in the Apply windows Settings TS. Also when i try to edit the window to join domain in TS if i enter "server08r2.local\administrator" red dot will not go away. How can i substitute it with the %Variable%. Or what am i doing wrong. Thank you for all the help. …

    • 0 replies
    • 3.1k views
  15. Started by ADB,

    I've tried the modified xml of Anyweb's but didnt work out. after having run sysprep in OOBE and Shut down Mode I should capture the reference machine. My question: Are there any spezial modifications (beside the workgourp joining and the blank Admin Password) in the TS to capture an allready setup windows 7 OS with Applications in it? Do I have to install the ConfigMgr Client on the reference machine to capture it? Would be grateful for any inputs here... Greeaz Anna

    • 20 replies
    • 11.6k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.