Deploy 7
Deploying Windows 7
644 topics in this forum
-
I am trying to apply a couple fixes to our image using the "Run Command Line" in the OSD Task Sequence and it is giving me this error which I found in the smsts-date.log. I searched for this error and didn't find much of anything on Technet. I am considering opening a case. I would appreciate any guidance. Expand a string: smsswd.exe /run: cmd.exe /c net localgroup administrators /add SRCShell TSManager 10/6/2010 10:52:33 AM 2708 (0x0A94) Expand a string: TSManager 10/6/2010 10:52:33 AM 2708 (0x0A94) Command line for extension .exe is "%1" %* TSManager 10/6/2010 10:52:33 AM 2708 (0x0A94) Set command line: smsswd.exe /run: cmd.exe /c net localgroup adminis…
-
- 4 replies
- 9.9k views
-
-
Hello, I have successfully captured an image of a W7 x64 computer that was joined to our domain. It deploys fine with a task sequence but every machine is named with the image name that was captured (RH-W7-Image) and not the computer name of the machine being imaged. Any ideas? Thanks, Dan
-
- 6 replies
- 4.4k views
-
-
For now we are making fat images per type model with the MS build and capture method. This is a bit heavy on hard disk space. We have, until now, had 2 problems with that method. We have computer installs where the client site status is 'Unknown' so computers aren't giving any info back to servers. The second is that some computer aren't taking the correct drivers anymore. Therefore I'm looking for a more universal method and came up on some interesting ideas from technet forum. Installing Win7 on a vmware virtual image, configure it like it should, no client agent installed and capture it offline with imagex. (don't know if the vmware tools must be installed) This w…
-
- 4 replies
- 7.4k views
- 1 follower
-
-
Hello guys, I have a Task Sequence that deploys a Win7 image that is about 6.0gb and about 10 packages that equals about 500mb's. I have all of these on 1 distribution point and the Site Server. Do you guys recommend that I keep the packages and image on the Site Server or just keep them on the DP? How does SCCM regulate where do get the packages from? If one DP is maxed does it move over to the other DP? Thanks, Jason
-
- 1 reply
- 2.9k views
-
-
Morning All, I have followed your guide with the build and capture of a windows 7 machine. The build goes ok, any software is installed and then fails with a 0x00000001 error message when trying to run sysprep. Your deployment guide states: Note: if sysprep fails for you at this point with SMSTS.log file reporting verifycapturerequirements fail 8004001 then simply recreate the ConfigMgr client package from definition, and push it out to a DP then use that client package in your TS I get the above error and have re-created my ConfigMgr client a few times and am still getting the same fault. Am I missing something? Kind Regards, Paul
-
- 11 replies
- 10.8k views
-
-
have a simple bat file that copies an .exe file to "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\" on a Windows 7 PC. in the smsts-XXXXXX-XXXXXX.log file I am receiving this error message. Below is the bat file that I am using. When I push this out to a PC that is already imaged and on the network, it is working fine. But when I build this application in UDI and then run my TS it errors out. @echo off xcopy Printkey2000.exe "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\" /Y exit Installation failed with error (0x80070004) InstallSoftware 2/23/2011 12:39:50 PM 2796 (0x0AEC) Install Dynamic software action failed…
-
- 2 replies
- 12.9k views
- 1 follower
-
-
Right before capturing the image of a Win7 install, what can be deleted? I found an article but for XP and also for creation of thin clients http://uebelackers.wordpress.com/2010/10/05/hp-t5720-setup-with-sccm-2007/
-
- 2 replies
- 7.6k views
- 1 follower
-
-
Hi, we create with build and capture own Images from Windows 7 and deploy them to Desktop PC and all looks fine and greate there, published Apps would be automaticly install. Now my Problem: I deploy the same Image on LAPTOP´s and first all looks great, the Tasksquenze install all what is defined but if all ready nothing go one. Windows 7 is installed, a feew apps from the tasksequenz and thats it. But the config Manager Client say that the sitemode is UNKNOWN, this problem is only an Laptops and nothing go on. If i uninstall with "ccmsetup.exe /uninstall" and reinstall with "ccmsetup.exe" (no parameters) and wait a feew second all looks great, the Sitecod…
-
- 0 replies
- 2.5k views
- 1 follower
-
-
Hi all, We've setup SCCM 2007 r3 in native mode on a server 2008 r2 sp1 OS. MDT2010 also installed site server signing certificate web server certificate and client certificate are OK. But now i want to create Task sequence boot media. What has been done so far.. Duplicated the SCCM client certificate template and set the allow private key to be exported switch From a freshly (manually) installed windows 7 sp1 machine requested a certificate from the duplicated template. Exported this certificate with the private key and tried to use this in the boot media. basically thats what it says here: http://technet.microsoft.com/en-us/library/bb632961.aspx We k…
-
- 2 replies
- 5.2k views
- 1 follower
-
-
Hi Am new to SCCM but am kinda liking it. This is what I have so far that is driving me crazy. I have window 7 that I captured and imported it into SCCM. I can deploy the image fine but during the deployment the, the image retains the old PC name. Hence which ever OU I pick in TS the computer goes back to the origianl OU and non of my group membership is pulled down. To clarify this, I have a PC running XP named PC1 sitting in the domain under OU=Accounting. Under my TS I choose the new OU for that PC to be ITS. I advertise my windows 7 TS. PC1 gets the advertisement, image the PC but the computer name stays the same. Also the OU doesn't get changed. Once …
-
- 5 replies
- 6.5k views
-
-
Not sure why but when my OSD TS does a reboot into WinPE, it goes and formats the HDD, and it starts to download the Windows Image .WIM file and I get access denied errors. I looked at the permissions for the share folder and it looks correct. I can connect to my computer using its DNS name and to SCCM and copy over the SMSTS.log file. The screenshot "permission.jpg" is the permissions as well as the user I use to activate the TS to start. If someone can help that would be great.... smsts.log wpeinit.log
-
- 11 replies
- 29.3k views
- 2 followers
-
-
I'm trying to set a custom computer name and I'm almost there. Just need a little help. First, I'm using OSD++ to pop up a Window after the disk partition. I'm using OSD++ During my initial task sequence. When I take a look at the log file created when using OSD.exe I see the infomation below. What I'm trying to get is the Computer Name to look like this. MNEP-CND0230TL2 Or, Variable Locationalt1 + SN (when looking at the osd log) So How can I add the Locationalt1 + SN Variable into a new variable called say ComputerName and assign that into the SCCM ts variable OSDCOMPUTERNAME Here is my OSD ConfigFile: <?xml version="1.0" …
-
- 4 replies
- 8.6k views
-
-
Hi. How will you deploy new Windows 7 with SP1? Will you create new images with SP1 or include SP1 in the task sequence?..or something else..
-
- 1 reply
- 3.2k views
-
-
I'm having a terrible time trying to find what is really required (environment wise) for SCCM OSD deployment. I want to go ahead and use a TS to deploy the OS. I don't plan on capturing a image as W7 base image comes with all drivers and as of right now we are not saving any user data as we use folder redirection. So my question is..... Do I need to have MDT? I was able to get a base install to work previously (barring my other issue from another post which is still happening!) I've gone through the guides here and its never mentioned which to me means its not needed. But can someone let me know any benefits of it? What the goal is, is to have a base vanilla image…
-
- 0 replies
- 2.9k views
-
-
Hi, Please bear with me as although i setup our SCCM and configured it all so far we are only using it for Application Deployment. I am only just starting to try and unearth the OS Deployment side of it! I'm woundering if someone can help me? Sorry its a bit long winded! Our current setup we have used for a few years and im looking to expand our use of SCCM more and more. Currently we have a WINPE environment, if we need to rebuild a PC or a whole suite of PC's we simply PXE boot each of them into our PE enviornment, her we have a GUI where we can stipulate a few items PC Name PC Model Screen Resolution (2 predefined and a a custom res option) …
-
- 5 replies
- 5.6k views
- 1 follower
-
