Deploy 7
Deploying Windows 7
644 topics in this forum
-
Hi, I am deploying 7 via OSD, but need to access the TS variable OSDcomputername in order to create a folder called the PC name on a USB drive (I am backing some files before installing 7). Has anybody managed to access the variable and use it in a command line? Thanks......
-
- 0 replies
- 2.7k views
-
-
Hey All been trying this for a few days now and not getting to far. ive got a PC that PXE boots and loads winpe and starts the task sequence but when it tries to connect to \\sccmserver\smspxeimages$ or any share on the sccm server it doesnt connect when i launch CMD and try to map the drive the username isnt accepted i enter a network username and password and im told no more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept. i can map from this PC to another PC or server on the network i can map to the sccm server from a normal desktop PC thats built and …
-
- 5 replies
- 4.2k views
-
-
I am using a very vanilla TS. Format/apply image/apply settings/setup windows and cfgmgr/join domain/run cmd line (to add groups to admin group). I would like to add a steb before joining the domain to rename the pc. We use a naming sequence here of org##### so something like pc11111. All the pc's in the collections have this name in the name field. Is there a way to create a step that grabs that name field entry and uses it?
-
- 1 reply
- 3.8k views
-
-
I have used the same w7 64 enterpise image (captured off a vm) on a different series HP machine with no issues. On teh hp all inone i get 80004005 erros at various points after it partitions and formats the drive. It never begins to download the w7 image. My boot image contains the network and sata driver for the system.
-
- 2 replies
- 3.4k views
-
-
Hi, I managed to successfully deploy a number of Windows 7 boxes using SCCM about a year and a half ago and they are now reaching the point when some of them want a re-install. I can't figure out how to get the advertisements I created for the computers to apply again. I've added the computer I want to re-install back to the collection I had the advertisements running from and ensured that the Last PXE Advert has been cleared. I try and PXE boot the device and it tries to contact the TFTP server and fails. I know that I had this problem originally when I tried to re-install a box as I was doing the first batch of computers and everything worked fine (implying…
-
- 1 reply
- 4.3k views
- 1 follower
-
-
Hello, I was curious if there is a variable to add specified domain user to the administrators group. I have the OSDComputerName variable setup and appreciate the ability to change the computer name before running through my task sequence. I would like to have the same functionality with user permissions. I found the original OSDComputer name options here if interested: http://technet.microsoft.com/en-us/library/dd252752.aspx Thank you, Shaun
-
- 2 replies
- 3.7k views
-
-
I have a machine that I am trying to re-image. I removed from SCCM (search on MAC and delete - has always worked before) and PXE booted. Normally, after a log in screen, it prompts me to choose one of three flavors of task sequences that are advertised to UNKNOWN machines. This one, however, was pulling down a PE boot image that is not associated with any of the TS's used for the UNKNOWN machines. I would get the prompt for the password and then get a message stating that there are no advertised tasks for this machine. There were three other task sequences that were using this particular PE boot image and I have removed all three advertisements, even though they were all …
-
- 3 replies
- 5.1k views
-
-
MS_MP_Control_Manager & SMS_Distribution_Manager are marked in Red and i do not have access to start this. Regarding SMS_Distribution_Manager its red as its trying to deploy Visio and its not finding the target or source(this was from long time). First when i use USMT for data migration after booting SCCM windows comeup and then when it tried to prepare network connection (no log file so i thought it might my rights issue), the machine reboots, so i removed USMT to confirm that rest things are going smoothly, so without USMT when i deployed SCCM goes to some extent and gives an error task sequece failed (log file attached). When i verified the log file it states…
-
- 1 reply
- 6.2k views
-
-
Hello all, I am working with a task sequence that has been used many times already, but now will not run to the end. It has been stopping at various places and there is no obvious error statement to go along with it. The TS just ends. Which logs can I be looking at to figure this out? Is there a log that shows each step of the task sequence as it is being executed? I have gone through the smsts.log already but see no error, just the line "Execution engine result code:2" right before the final reboot and near the very bottom of the log. Also, it shows the initial statements "Parsing ..." for each line of the task sequence, but doesn't show them being executed…
-
- 2 replies
- 7.2k views
-
-
Good Afternoon All - Got a big issue going on. For at least the past 2-3 weeks, my Build & Captures have been failing. It doesn't matter what OS I'm deploying, what Image I'm using, etc - they all fail at the same point. Here's some background info: My company has 4 sites - Tennessee, San Diego, Mexico, & Ireland. - Tennessee - Primary SCCM Server with all roles, but DP & MP which are on seperate, local server. - San Diego - Secondary Site which holds DP & couple other roles - Mexico - - Secondary Site which holds DP & couple other roles - Ireland - - Secondary Site which holds DP & couple other roles Here's an example of a B&a…
-
- 7 replies
- 5.1k views
- 1 follower
-
-
Hello, I need a help here. I have a built image of Win 7 Ent. I have deployed the OS with Bootable media and through PXE to many baremetal PCs. But we got new set of PCs almost the same model like the image I already have only the NIC has changed. I downloaded and injected the NIC drivers into SCCM OSD tools. I can deploy Win 7 to the new PCs through PXE but whenever I tried to create a bootable media, it fails all the time. I need to create a bootable media with the new NIC driver so that the bare metal pcs could connect to the SCCM server. Your help is highly appreciated. Thanks, Abassydo
-
- 1 reply
- 3.5k views
-
-
I want to capture the reference machines and deploy WIn7 OS.I have done that using PXE role and have successfully implemented it. But i have never deployed an image on machine having static IP. There is no DHCP, so how to deploy OS without PXE point. One option is to create a boot media and deploy. Google'd and found that we can we transfer just the boot image (Windows PE) to bootable media and allow the computer to communicate with SCCM to determine which Operating System image to deploy. Can anyone tell how to go with it. Please suggest.
-
- 1 reply
- 4.1k views
- 1 follower
-
-
Hi, I'm having an issue getting a bare-metal machine to boot to PXE in Hyper-V and I would appreciate any help anyone can offer. The setup. Hyper-V Running on Server 2008 R2 with one virtual network (private) the VMs have no contact with the host or the internet. DC01.domain.com (IP: 10.0.0.1), OS: Server 2008 R2, ROLES: AD, DHCP. DHCP Scope: 10.0.0.50-10.0.0.100 SVR1.domain.com (IP: 10.0.0.2). OS: Server 2008 R2, WDS server role installed and SCCM. CL1: Bare-metal machine, legacy network adapter. This is what I did: Installed SQL Server 2008 and all pre-reqs for SCCM Installed and configured SCCM Installed MDT and allowed SC…
-
- 1 reply
- 3.9k views
- 1 follower
-
-
Hi Anyweb, I am trying to install Windows 7 using pxe boot but unfortunately it doesn’t happen. I have tried every website and experts-exchange support as well but no luck and as a last resort before calling Microsoft I am writing this email to you as you look interested in Windows 7 deployments using SCCM and I am very much interested in your blogs. SMSPXE log file info: NO boot action defined No advertisement found in database However I have attached smspxe.log for your reference Client side error: TFTP download :smsboot\x64\abortpxe.com. Also please find the latest logs and screenshots I have taken to say that I did advertise TS in a way…
-
- 2 replies
- 5.4k views
-
-
hi, has anyone tried with success to implement the "StartPanelLinks" line under the "Microsoft-Windows-Shell-Setup" in their unattended.xml (processing through the TS in the Apply Operating System) the "taskbarLinks" is working ok, but nothing appears in the start panel Also I tried to specify the background, with no luck I repeat those parameters in the Specialize part and OobeSystem, as I'm not sure wich one should work here an extract of my answer file, in the specialize part (french version of windows 7 x64) <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScop…
-
- 3 replies
- 6.4k views
-
