Deploy 7
Deploying Windows 7
644 topics in this forum
-
Hi, Im trying to deploy win7 and I used these instructions to set it up : http://www.windows-n...ploy-windows-7/ I am able to go into winpe but then the system reboots everytime! I am using vpshere 4.1 and I did some test with the command prompt and my network is functionnal ... I will attach the smsts log that it gives me ... The problem seems to be that it cannot reconnect to the share with my boot image on it Failed to connect to "\\SCCM.ACADEMIE.STE-THERESE.COM\SMSPXEIMAGES$\SMSPKG\AST0000D" But I tried to connect to it manually from cmd prompt and it was successful ... So I have no idea what to do. thanks for the help ! EDIT : I tried on a physi…
-
- 3 replies
- 3.6k views
-
-
Hi I built a TS to deploy Windows 7 x64 on SCCM using the option "apply operating system from an installation source. The TS kicks OK and the imaging is 100%. But after the deployment I CANNOT launch IE or Firefox on a specific model "Dell Optiplex 790". All other models are OK 100% Attached is the my TS step. Am in the process of updating my Bios as it's one version behind. Am I going crazy or there something am overlooking.
-
- 1 reply
- 3.3k views
-
-
Hi , i'm using the OSD with SCCM MDT and working fine. Even though i already specific logical drive letter to C: in my TS, but seem like everytime during finish OSD, the active drive letter it chooses is always D: and not C: . Can you please advise how can i solve this issue. Many Thanks
-
-
- 2 replies
- 5.8k views
-
-
Hi I have question regarding some OS installations that are stuck in the running state long after the installation has finished. This is a problem for us because other software will not get installed unless the OSD has finished successfully. The final step in our OSD task sequence installs all software updates that are advertised. And I have selected to ignore errors in case they do occur. Because software updates will get install later on anyway (not preferred). But the problem is that when we are advertising more updates to a computer than are available on the DP. Reason might be that the updates are currently being staged or we have forgotten to stage them. And the…
-
- 0 replies
- 4k views
-
-
I need help understanding this function. I can't seem to locate any straight forward direction on how to capture and restore user setting using an SMP. I created a TS and it automatically created two groups "Capture Files and Settings" and "Capture User Files and Settings". This doesn't seem to work straight "out of the box". The groups run but when I look at the folder I created on the DP to be designated as the SMP it's empty. I have a TS that will be advertised to the machines, I ultimately would just like it to capture any user/network/machine settings, copy them to the SMP, apply the OS and copy the settings back. Could someone point me to a basic guide on how to do …
-
- 2 replies
- 3.3k views
-
-
Hi everyone, I've a problem with the deployment of Windows7. I've made a unattended file for the keyboard settings, but when I deploy windows 7 I encounter some problem: -I need to set up the Italian(Switzerland) keyboard with SWISS FRENCH and SWISS GERMAN, the OS language is Italian, so what I made: <SystemLocale>it-CH</SystemLocale> <UILanguage>it-IT</UILanguage> <UILanguageFallback>it-IT</UILanguageFallback> <UserLocale>it-CH</UserLocale> <InputLocale>de-CH</InputLocale> In this XML I've tryed to only set the swiss german keyboard...when I start wind…
-
- 0 replies
- 3.7k views
- 1 follower
-
-
Do I need to setup computer associations to capture and restore user data from/to the same computer? If so, How do i get a "file" of all my machines to use the import from file option?
-
- 2 replies
- 3k views
-
-
Hello, Does anyone know if there is a way to change Local Security Policy via a TS. We use SAP here which apparently uses Kerberos. There is a security policy that is not configured by default in Windows 7. Security Settings > Local Policies > Security Options > Network Security: Configure encryption types allowed for Kerberos I had to enable it and check all the types. Now I need to figure out how to get that setting in the OSD TS. Thanks, Mike
-
- 4 replies
- 4k views
- 1 follower
-
-
We have decided to deploy Win 7 via SCCM (OS upgrades were done with ghost images in the past). Initially the plan was to build an "image" via TS and then burn that to stand alone media. So after months of work management changes their minds and wants to do this over the network. Question #1 is PXE required if you plan to advertise the TS and if not can someone point me to a nice guide on how to configure this setup or is it as simple as building the TS and just advertising it to machines with a client? Question #2 is not necessarily related but I was going through Peter's offline USMT post and my user capture settings screen looks different. Was hoping someone co…
-
- 3 replies
- 3.9k views
-
-
Hi, Deployed a few laptops from SCCM 2007 R3 via the Pre-Staged Media option. Everything looks great, however the drive label for C: is show as "Even Glemmestad" (my name) in My Computer. This is regardless of the logged in user or first logged on user. When running "diskpart" and "list volume" the C:-drive is listed with label "SYSTEM" (correct), and the same is also shown when viewing the properties for the C-drive. In My Computer, however, the icon for the C-drive is the same as for unknown files, and the text is "Even Glemmestad". I am the one that created the image and task sequence, and my name is listed as the "Created by" on the Windows 7 image. It is …
-
- 3 replies
- 4.5k views
-
-
Hi, I am currently deploying machines over 802.1x network and am using user authentication to achieve this, however I found one problem. The computer being deployed does not retrieve machine certificate until sometime after the OSD has finished. I have created a vbscript that creates an inf file (putting the hostname into the inf file). Then I use certreq to create the request, submit and accept cert from the enterprise CA. This is all done in my win7 deployment task sequence while in current OS (not Winpe). I have tested this on a computer that has been deployed and it works fine. However during the OSD I get this error: Error title: Certificate Request Proc…
-
- 0 replies
- 6.7k views
-
-
Hi Niall, Firstly thanks for all the great work you have done on WindowsNoob. It's great site and without sites like yours I simply wouldn't have been able to progress with SCCM ( I have attended the MS training course). I wonder if it was possible for you to tell me how I can debug why a Gather step in a OS deployment TS would send the TS to the last step without doing the intervening steps. I am talking about the gather process that happens right at the start. format and partition, Toolkit package then gather. Soon after this the machine doesn't go to the next step but goes straight to the last step which Gather Logs and statestore on Failure. I went throug…
-
- 2 replies
- 7.6k views
-
-
Hi, I'm very new at SCCM and OSD, so please forgive me if this is a really simple question, but I can't find an answer anywhere. I have a stand-alone disk for my OS image deployment (so I'm not connected to the SCCM server at all). It works, but I'm trying to figure out how to get the Task Sequence Wizard to launch automatically. Currently I have to click Next and then Next again to start it. I need it to run without any user intervention. I've browsed Google and this forum, but haven't found anything specific. I have a vague notion that I need to use customsettings.ini and bootstrap.ini, but I don't even know where those files are, much less how I need to modify th…
-
- 1 reply
- 11.3k views
-
-
Hi, Newbie SCCM user here! First of all let me say how good the guides on here are. Now, i use SCCM for deploying packages in my setup but use MDT for image deployment. There really has not been any need to do this via SCCM until now so i need to get this up and running. I have a custom wim file that has been captured with MDT that i will use for SCCM deployment. I have added the image and created a task sequence. The query i have is that i have not been able to specify any source files from a Windows 7 CD. Am i missing something?
-
- 1 reply
- 3k views
- 1 follower
-
-
When deploying Windows 7, I'm a bit confused with regards to the Administrator account creation from a TS from within SCCM. That confusion probably stems from the "Randomly generate the administrator account and disable the account on all supported platforms (recommended)" option from within the "Apply Windows Settings" of my task sequence. Why would that be recommended? I have yet to work within an Enterprise environment that ONLY uses domain accounts and has no backup/local admin account. My goal is this: Immediately after OSD, I want ONE local administrator account on the PC, I want it to be called "lionadmin", and for the password to be specified in the task s…
-
- 1 reply
- 6.6k views
-
