Skip to content

Deploy 7

Deploying Windows 7

  1. Started by diablo,

    Hi, I deploy windows 7 and vista in vmware. But i could not do it in hyper-v. I use same settings with vmware. And I also choose legacy network adapter and static mac address. After vm boots , it gets IP and connects wds. Windows is loading files... windows is starting up... and preparing network connections... this was my last screen. VM reboots after this screen. I think that we do not need network driver package for Hyper-v machines. I can not get smsts.log becouse i can not press F8 in last screen. How can i resolve my problem? Thankx...

  2. Started by The Bronx Bull,

    What is the "best practice" for deploying Windows 7 with restricted visual effects within the OS, so as to optimize performance on older hardware? Is this done through GPO, or do the changes have to be made on the image?

  3. Started by mikejc,

    I am having a very strange issue deploying SCCM clients to Windows 7 Enterprise x64. This has been demonstrated on multiple systems with the client being deployed either via client push, or during an OSD task sequence. It CANNOT be reproduced on Windows XP/2003 machines. In either case, the client installs successfully, and there are no errors in the ccmsetup.log, and it reports in successfully to the SCCM site server, and shows as approved. The SMS Host service is also running, and ccmexec.log is clean. Now here is where it starts to get strange. If you go into control panel, none of the SCCM client cpl's appear. There is no 'Configuraiton Manager', no 'run …

  4. Started by The Bronx Bull,

    Has anyone successfully packaged and deployed the Windows 7 Service Pack 1 MSI with SCCM? I packaged the MSI file, created a program, and used the following command: Windows_Win7SP1.msi /unattend /norestart When integrating this package into a task sequence, however, it does nothing but halt the TS and "Waiting for status on job."

  5. My company use only one OSD task sequence to deploy both Winxp and Win7 OS. The new bare metal PC should be register into a assets management system, with a few info (MAC,PC name,OS version) Then we can boot from PXE and the PC will apply the right OS version from SCCM. I found there was some variables used in OSD task sequence to define which OS should be applied? But in collection and computer options, I can not find the variables where it was defined? Is there any other way that the variable can be created or defined? thank you very much.

  6. Hi, I am fairly new to SCCM07 (less than 6 month in it) and suddenly I am not able to successfully perform Build And Capture tasks. I am trying to create new Reference_Win_7_SP1.wim file (one each in x86 and x64 versions). My tasks keep failing with a 80004005 error) I suspect this is a driver problem but I was able to build and capture several months ago. The smsts.log is not telling me much but the setupact.log from the x: drive seems to indicate that there are lots of unsigned drivers that are causing windows setup to fail. Any help will be appreciated. I am attaching both logs. BTW: other tasks are still working. I am able to deploy an image with applications. I …

  7. Started by glen8,

    Help :-) ...again We have, for the past few months been using SCCM to deploy Windows XP. Took us hours of work and scripting but we finally got there in the end. Now we are testing Windows 7. The build and capture task is hitting a VM so we can get our gold wim image created. The weird issue we have is that once Windows 7 is installed it's on D: not C: TS has been set to format disk 0 and windows should install to the first partition, then I even tried assigning a drive letter. any ideas? Thanks

    • 5 replies
    • 4.7k views
  8. Started by pss53,

    I followed the guide on this site to get my deployment of Windows 7 working. Now I have my image, I'm looking to incorporate USMT, what's the simplest way of doing this? I have looked at the following... http://www.windows-noob.com/forums/index.php?/topic/918-how-can-i-use-usmt-3-0-1-in-sccm-2007-sp1/ But cannot get my source machine to pick up the advertisement ? Is it an option to use the "CAPTURE USER STATE" in my deployment task sequence? Any tips or help would be appreciated... Thanks, Paul.

    • 1 reply
    • 3.2k views
  9. Started by The Bronx Bull,

    Does anyone here use USB Task Sequence media? Assuming you have a 'reboot' step within your task sequence, and aside from modifying the boot sequence, how do you prevent the PC from rebooting and booting from the USB stick straight back into the WinPE Task Sequence wizard, as opposed to continuing to the next step of the task sequence? It seems as though you would have to remove the USB media each time, whereas on a CD, it only boots to the media after you "press any key to boot to CD." Anyone have a workaround for this? What is everyone else doing?

  10. Hi... First... I've found this site to be PRICELESS and a GREAT wealth of information! Thank you VERY much for it! Next... I'm having a problem following the guide for deploying Win 7. I'm using your guide found here: http://www.windows-noob.com/forums/index.php?/topic/667-deploy-windows-7/ When I get to Step 2 - Adding Operating System Install Package, I browse to where I've located the Win 7 x64 SP1 files, but that directory is NOT shared out on my SCCM server. Do I need to share it out? Or am I placing the files in the wrong place? If I do need to share it out, what permissions should be on the share? I've installed MDT 2010 and Windows Installer S…

  11. Started by beben,

    Hello, I have a question. I have configure a SCCM 2007 and in the Headquater the SCCM a runs. I Deploy Windows 7 with PXE and in the Headquater is all ok. And in the Brach Office i have configure Brach Distribution Point and the Distribution Points runs. And when i add a new Boot Image Packeg to the Distribution Point it run but when I add a new Operating System Image to the Distribution Point in dont runs. And my second question ist when I Deploy the OS Image wia PXE to the Bruches I need a PXE Service Point on the Brach Distribution Point and a WDS??

  12. Hi Guys, Hope all is well. Hope someone can help please. I'm trying to deploy windows 7 to a hyper-v client within my test enviroment. I have imported the windows 7 boot file and have also imported the operation system files, and created a task sequence then advertisted it against the collection which the hyper-v client lives in, but the client doesn't start the install process. I've had a look around this forum but i am unable to find any post which point me into the right direction. I receive the following description within the Status Message Viewer:- Advertisement "WIN20027" was received from site "WIN". The client passes any supported platform req…

    • 11 replies
    • 10.3k views
  13. Is it possible to upgrade a users computer from Windows XP to Windows 7 using SCCM 2007. If so how would you to this?

  14. Started by GolfKingUK,

    Does anyone have a definitive guide where all the Use Toolkit Package, Gather (Running customsettings), and copy logs should be in a task sequence. I am getting partial logs, but it doesn't seem to be appending the smsts log and I only get the last few minutes ( rather than the whole hour long process). i also notice the _smstasksequence directory on C: is hanging around, i think it's due to not having the toolkit, customsettings and copy logs MDT entries in the correct places. Thanks in advance.

  15. Started by as400ssw,

    Hi to all, I deploy Windows 7 Enterprise x64 Eng with SCCM 2007 SP2 R3 The image master includes multilanguage setup in ITA, FR, DE, JP and CH (semplified and traditional). When I start the Image capture wizard from CD the Default input language is "Italian". After I Install this captured image on other PC's (after sysprep run) the Default input language is misconfigured, for example in CH language (keyboard). I want to configure the default input language in Italian for all new user in this image deployed. How can I setup this parameters? tnx a lot Alex

    • 3 replies
    • 6k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.