Skip to content

Deploy 7

Deploying Windows 7

  1. Hi, I am confused with the online documentation on running a batch file from in a TS. Basically, I am installing a software using batch file. My package source contains: app.exe, configfile.ini, regfix.reg, INSTALL.bat. I'd like to create a program to just run the bathc file which works on the config files & exe. So after some online ref. I used below format but it does not work. commandline: %~dp0INSTALL.bat Any ideas?

    • 5 replies
    • 6.4k views
  2. Started by ibrafe,

    Hi Where is the Task sequence located in SCCM in particular when I use my account under "Apply Network Setting" to Join a PC to a domain? Is the account saved as a txt or xml file? If the account is generated in the SCCM DB. How can I find this info? Just a question security edit I had to go through with SCCM that caught me off gaurd. Thanks

  3. Afternoon guys, Maybe I'm being stupid but... I have still to come across a procedure for building Win7 PCs using SCCM 2012 (groovy task sequences etc) without first defining the machine in the console and using PXE or deploying to an already built machine. We're not planning on making PXE available in every building and I can see there will be times when I'll want to build bare metal in a location where PXE is not available. I come from an SMS 2003 / BDD 2007 setup where we didn't use PXE at all so forgive my not knowing this if it is something obvious...

    • 3 replies
    • 4.9k views
  4. Hi all, First time post. Let me say this has been a fantastic resource and that I've learned much from searching existing posts. That said, I've finally come across an issue I don't see others experiencing. I've installed SCCM 2007 R3 and have my Windows 7 x64 OSD TS nailed (or so I thought...), with much help from reading this site. I'm moving on to the next step of installing software through collections and noticed software wasn't installing until I rebooted the OS. Digging further, I noticed the "Setup windows and ConfigMgr" portion of the task sequence is setting the "PendingFileRenameOperations" (http://technet.microsoft.com/en-us/library/cc960241.aspx) key …

    • 1 reply
    • 3.7k views
  5. Started by Peter Sokolov,

    I need to create an only Capture Task Sequence. I have Windows 7, with all drivers and soft. Look down which steps I made: 1) sysprep.exe /quiet /generalize /shutdown /oobe 2) Made a task sequence in SCCM like anyweb told me "you can just rip the capture part of the build and capture ts and advertise THAT to your windows 7 capture collection, if i get time i'll do up a post" (sccm_task1.jpg) 3) Booted my PC (which I need to be captured) 4) Got an error (IMAG0001.jpg) So can anyone help me - where is my mistake? Thank you!

    • 13 replies
    • 33.1k views
  6. Started by ogeccut,

    I am trying to find a way to query an OU and find next available object "001, 002, 003...." and assign this value to a %Computername% I see that there is a thread with some examples http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/39eaa0e9-1b24-4123-a072-2a01ed1e7e6b#d73d7914-c8c3-4851-be31-f435cbcc2ebf, but not able to get it to work. Has any one done something similar with naming workstations? Is there a way to assign a value to a OSDComputerName from the script in the TS or is has to be done from Customsetting.ini file from integrated MDT? Can i add "Set TS variable" task and in the "ts variable" set "OSDComputerName=????" …

    • 3 replies
    • 4.9k views
  7. Started by capriguy84,

    Hi all, My OSD was working fine till this morning and then something happend and now it fails with log "Unable to connect to \\sccm-server\SMSPKGE$\LAB00073\". When I manually try to go to this URL, it fails. I have another site and it works. I can browse the above destination on this server. How can I reset the Distribution Point folder permissions? I did try site reset "Reset SMS Provider" but no good. Thanks for you help.

  8. Hello, My task sequence runs fine on a VM but when I use a physical machine it fails after the reboot with "PXE boot aborted" error. I have seen this earlier when the computer remembers last PXE advertisement. But here, it properly boots in PXE and loads PXE image and when it restarts, it does not go to PXE. I am using Dell Optiplex 990. My task sequence is set to "Rerun if failed in previous attempt", I also tried "Rerun always", but it fails too. Any help is appreciated. Thanks

  9. I was tracking the OSD sequence and my TS fails here. I am not sure what is going on here. Can someone shed some light on this? This happens after drivers install and Config Manager install proceeds to finalise the system. Last Action: Setup Windows and ConfigMgr Last Group: Setup Operating System Last Status Message ID: 11135 Last Status Message Name: The task sequence execution engine failed executing an action Exit Code: 2147467259 Action Output: on information to C:\_SMSTaskSequence\unattend.xml Successfully initialized driver information Command line for extension .EXE is "%1" %* Set command line: "\\SCCM1.NYC.DOMAIN.CORP\SMSPKGE$…

  10. Morning All… I’m looking to use the Pre and Post OEM Task Sequences in SCCM 2007 R2… I have successfully got these two task sequences working on the same physical system. The Pre OEM Task Sequence installs the captured image and core apps and then runs ZTIOEM/Pre to place the breadcrumb files and set the partition to inactive.. .the same system is then pxe booted and the Post OEM Task Sequence is run. This applies the system name, drivers, install system specific apps and joins the domain, everything works as expected. The problem I have is capturing an image of the system once it has run the Pre-OEM Task Sequence in order to apply the image to another pie…

  11. I am migrating some machines to Windows 7 and I am currently using a task sequence variable with a query, the query checks the MSI (in this case office 2007) and the sets a variable to Yes if it finds office installed. After the OS has been applied I then perform a query on the software to see if the task sequence variable is set to Yes, if it is not set to Yes skip installing the software. My question is, is this the best way of building a list of installed software to re-install after the upgrade or is there a smarter way of doing this that I am missing?

  12. Hi Folks, Everything was going so well PXE boot looks good, it seems to copy the INSTALL.WIM ok (F8 in DOS and it is present). Fails at the Applying OS stage. X: SMSTS.LOG attached. Looks like it can't find a file? Strangely I can't access an E: in DOS as mentioned throughout the logfile but maybe this is by design. Hmmmmmm. All suggestions welcome. D smsts3.log

    • 5 replies
    • 14.1k views
  13. Started by lipps,

    Hi, i thought i had seen this somewhere before but cannot locate it any longer. Right now we use an HTA front end that allows the deplorer to select a MDT role, which has SCCM packages assigned to it. These packages are then installed during deployment. Works perfect. Due to a change in direction from mgmt, I am now looking at the need of possibly using Collection Variables to somehow call that same MDT Role, but not having much success. Basically, i have set the collection variable, and using tsenv2 i can see during deployment that the system picks up the collection variable, but how do i now make that connection to the MDT DB and have the appropriate SCCM pa…

    • 0 replies
    • 3.1k views
  14. Started by P@docIT,

    Can someone tell me how to run an elevated command prompt via a TS? I have one TS that copies a folder down from the DP to C:, I then want to copy a shortcut from that folder to the public desktop. When I try this manually I get prompted by UAC to grant admin privileges or I can do it via CMD but it has to be an elevated CMD prompt in order to not get the UAC prompt. Is there a way to tell SCCM to run elevated? I see you can run the TS as a specific user, however my account has local admin rights and I still get the UAC prompt. Thanks, Mike Edit: Updated info: Below is the error from the log. Maybe not an elevation problem. It says it can't find the file speci…

    • 3 replies
    • 6.9k views
  15. Started by praks,

    Hi, I currently have a Windows XP with single partition. I tested the Hardlink migration, it migrates XP to Windows 7 without any issues. But now i am also planning to implement Bit locker, i need to create an additional partition (fixed size)for 300MB at the same time i have to restore the files of XP on the next partition. How this can be acheived from SCCM SP2. Any thoughts. Thank you, Prakash R

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.