Deploy 7
Deploying Windows 7
644 topics in this forum
-
I have 2 task sequences...one to capture the existing XP image to a network share...and another to deploy the Win7 OS and install required software. Both TS's run just fine independently, but when I combine them into one full process, it fails at the beginning of the deployment phase (diskpart). The workstations are configured with WinXP, 1 hard disk with 2 partitions (C & D)....c is the OS and d is for miscellaneous data. Server is Win 2k3 Ent R2 w/ SCCM 2007 SP2 R2 w/ MDT integrated. After combining the task sequences, I get access denied... this is the error: The task sequence execution engine failed executing the action (Partition Disk 0) in the…
-
- 0 replies
- 5.4k views
-
-
Hi, Whilst trying to apply a package as part of an OSD TS, the TS is consistantly failing with the same error 0x80091007 - The hash value is not correct. We have tried multiple different things to fix the problem but seem unable to. We have tried the following: •Updated the package on the DP •Removed and re-added the package to the DP •Completly removed the package from SCCM, re-created and re-added to the DP •Refreshed the package on the DP and updated the package immediately •Applied the hotfix from KB2276865 to the client - I read on another forum this could be casuing an incorrect hash •Changed the TS advertisment and set the option: Access content…
-
- 2 replies
- 10.8k views
-
-
hey guys, im using software updates to deploy windows updates to my workstatoins... i also got an win 7 image that is deployed when needed on new copmuters.., instead of redeploying the software updates , i want to pack all the updates that i deployed onto the win7 image during the task sequance install... i know i can install the updates on the image and repack the image to new wim file an deploy it.. but its alot of work with several win 7 iamges (deiffrent softwares,models,needs etc') is it possible? thanks!
-
- 2 replies
- 3.4k views
-
-
I've taken on the role of updating the Task Sequences for our Windows 7 Enterprise x64 deployments and need to add in a few Windows features during the imaging process. We start by applying a captured image and then install some department specific software. The features I need to include are: Microsoft Internet Information Server Microsoft Indexing Service Microsoft .NET Microsoft SMTP I found the portion of SCCM that allows me to Install Roles and Features (Add -> MDT -> Install Roles and Features) however when I image a computer it doesn't appear to work, I found a solution that alludes to the problem residing with the 64bit nature http://social.techne…
-
- 2 replies
- 3.5k views
-
-
Hello, Thank you for such a great forum. Here's my problem: Changes made in the console to advertised task sequences aren't reflected when I PXE boot and run them again. I've also tried making new ones and unless you reset the server they don't show up. What I've tried: Creating a new task sequence and advertising it - updating collection memberships and restarting the WDS on the distribution point Deleting already advertised task sequences - the PXE boot task sequence wizard still shows them as available Where does sccm store advertised task sequences? Are they distributed like application packages to the local dp's? Or is it the database an…
-
- 4 replies
- 5.5k views
- 1 follower
-
-
Hi all, i have TaskSequences for Deploy OS on new computer/refresh OS/replacement, but what can i do, if on our department come older Computer with corrupted OS/registry and dont boot to OS?? If Computer boot to OS, so its fine, i can use REPLACEMENT TS, but if dont?? Again using Sym.Ghost for save DATA partition and deploy on new Computer? Thanx for your tips and experiences
-
- 3 replies
- 3.3k views
-
-
HELPPPPPPPPPPP I am having trouble importing Dell E4310 NIC Driver into the image. It successfully imported the driver (i hope i have the right version Dell-WinPE-Drivers-A03. downloaded from Dell website), but i cannot seem to get any IP address in F8 mode. So it keep rebooting even before i can actually choose any advertised task. I even tried this link http://danielssccmworld.blogspot.com/search/label/OS%20Deployment to modify the inf files but still no success. Can anyone tell me if this issue came across and managed to resolve it? Cheers for that.
-
- 3 replies
- 4.4k views
-
-
My task sequence is failing with the error "Cannot create a file when that file already exists. (0x800700B7)" The image I created had the ConfigMgr client on it. From the smsts log it looks like the error occurs around the time the TS is trying to install the client. Should my image not have the client on it before I use imagex to capture it? If so, how do you get the computer into a collection to advertise the TS to it? Or use Unknown computer collection? Thanks, Dan
-
- 1 reply
- 7.1k views
-
-
I am at the last point of getting my Windows 7 image ready for deployement. I have all my task sequences for Side-by-side migration and my bare metal sequences working great. I can get my image to load and install all my applications and even get my files from one computer to another. When I thought I was all done and new problem came up. I use the SCCM capture media to capture my image. Not sure why except its seems easier and i have been going it that way for 4 years. Anyway.. I have my unattend file in the syspre folder and have the copy profile parameters listed. I only have the administrator profile on the reference machine. I run the SCCM capture utility a…
-
- 7 replies
- 6.1k views
- 1 follower
-
-
Here's what I want to accomplish, and I've been successful with MDT 2010 but we've since added SCCM to our environment: 1. deploy base OS with sccm via pxe (I can do this fine using the build and capture ts, no problem here) 2. I do NOT want to capture the os immediately, so I'm assuming I either have to disable the capture portion of the ts or create a custom ts( any suggestions ??) 3. after deploying the base OS Windows 7 x64, I want to customize it, add apps, drivers, settings and so on. 4. I want to capture a .wim image of this non-sysprepped gold-image, and be able to re-image a machine at some future date, same model of course (so I don't have to go …
-
- 3 replies
- 9k views
-
-
Hey guys ! First thing first .. I want to congradulate AnyWeb, your work on your website has made my SCCM environment to grow in the right direction, I respect expertise & best practice ! a month ago, we installed SP2 to our SCCM enviroment. Numerous problems occured and I managed to fix some pxe issue and what not. But im very puzzled now .. Heres the situation. Since the update, if a computer is present in the database, I simply can't "import computer information" to a OSD collection, Nothing happends. I realised that deleting the computer from the DB would allow me to "import computer information" in the right collection and this where the pxe nigh…
-
- 1 reply
- 3k views
-
-
I am getting an error Task Sequence error failed with the error code 0x80070002. This is after it gets to the point when its using the toolkit. I have attached the code from the smsts.log smsts.txt
-
- 1 reply
- 4.5k views
-
-
Hi, I've finish installing SCCM 2007 following all your guides... I tried to install then capture windows seven enterprise x86 Sp1 I work under Vmware Wks 7 with network Bridge option I succeed either to boot "generated task media" or threw pxe For my example as it boots under pxe, then when PE is charged than it ask for password : so i enter the password (pxe password) and it continue to the chose of sequence... then i choose my previous created sequence then it stopped with the error : see under the joined picture !! "Unable to perform this task sequence for the program files for PackageID are inaccessible on the distribution point" I found a solut…
-
- 2 replies
- 4.6k views
-
-
Has anyone managed to get a checkpoint encrypted disk to load a new OSD task Sequence? I have to get this automated.. if I boot from pxe/cd/usb, etc, all is fine and it formats the disk and completes the task seequence. If I am running from "Run Advertised Programs" or making the build untouched and mandatory, it fails. The failure makes sense.. SCCM puts the boot image down, then can't read the disk after it reboots... I managed to find the Checkpoint resource kit which loads the prot_2k.sys into the winpe image.. This actually now gets us into winpe, which is a step further than I have ever got before.. but now as the winpe is booting up, during th…
-
- 0 replies
- 3.9k views
- 1 follower
-
-
Hello, Have SCCM in place for packages and and utilize OSD for imaging and deployment. All PC's are currently XP. We will be migrating them to Win 7. In testing, I am having trouble with the PC keeping its current name. I have the task sequence set to migrate domain membership in capture network settings. I have a generic unattend.xml file on the captured image but it prompts for the computer name. Utimatley I would like to push out the new Win7 image to all current XP images, keeping the same name and domain membership. What would be the best way to accomplish this? Script? modify the unattend? Thanks for any suggestions.
-
- 1 reply
- 3k views
- 1 follower
-
