USMT
scanstate and loadstate, computer association, USMT backup of users data and settings within SCCM 2007
200 topics in this forum
-
Background: Trying to do a replacement scenario in which the old computer has Windows 7 and the new computer will have Windows 7. KB974571 is NOT installed on either machine and the "Capture" task completes successfully on the old computer. Problem: When attempting to do the "Restore" it hangs at restoring the Administrator profile at 2%. No errors are given and if you do not manually stop the process it will just hang there. Goal: To restore the profiles from the old machine to the new machine. I have even tried using TS variables to element migrating local files but it does not seem to work according to the logs. Logs and TS: Rather than post the entire logs…
-
- 2 replies
- 4.3k views
-
-
First off I'm pretty new to USMT, but with the guides on this site I've managed to get it to migrate all our user data. The issue that we seem to be running into is that when we are migrating a machine from XP to 7 we are getting a duplicate icon on the desktop for all users. I'm trying to figure out how I can exclude this icon from being migrated, because the Icon already gets placed on the desktop when the software is installed during the TS. Does anybody have any suggestions as to where I need to look to stop this from happening? Thanks in advance
-
- 2 replies
- 4.2k views
- 1 follower
-
-
Hi, I have downloaded XP_to_Windows_7_Demo_-_X86_using_Hardlinking.xml from "http://www.windows-noob.com/forums/index.php?/topic/1633-sample-xp-to-windows-7-task-sequences" and imported it into SCCM console. After that i have edited some settings as per my understanding and made an advertiesment and deployed them to on XP Sp3 machine. when task sequence started after some it given error as attached. i have attached screentshot and smsts log file. smsts.log
-
- 7 replies
- 5.2k views
-
-
Hi All, I have some machines with windows XP and in C: users have 3 folders "data1", "data2" and "data3", So I will make a migation to Windows 7 with SCCM 2007 SP2 R2. Is there a way to configure Task Sequence to backup these folder and restore it later? I suppose is with config.xml file, but How do I add config.xml file to USMT Package? Also how do I set up Task Sequence to use this config.xml file during save user data and then in restore user data? Regards.
-
- 1 reply
- 3.1k views
-
-
Well, it seems like this is a somewhat common issue but for some reason, the common solutions have not worked for me. Here is the scenario: Windows 2008 R2 SCCM 2007 SP2 R3 in Mixed mode MDT 2010 installed and integrated but not trying to use MDT task sequences right now. Trying to do hardlinks (just trying to get USMT to work period, whether by hardlinks or not). I have followed the offline guide here, this Technet blog and Peter's blog's. I had one issue where sflistw7.dat was not being found. I found one article that suggested just copying that from the Windows 7 media. I did that and now I get the following in the loadstate logs: 2010-12-14 13:01…
-
- 6 replies
- 10.5k views
-
-
Hello everyone, I'm new here but am finding the info very useful. I'm fairly new to SCCM but do use it regularly for imaging machines. I have been given the task of finding a way to upgrade our current XP machines to 7 and preserving the user data, such as documents, pictures, desktop items, etc. I'm using one of the task sequence's I found on this site and have tried it out on an XP machine, and I see that it does copy user data and then it will reboot and install 7, but when I check to see if the user files are on the computer, they are no where to be found...It seems I'm just missing the piece to restore the data and/or is there something you have to do to the image…
-
- 15 replies
- 9.9k views
- 1 follower
-
-
I am trying to automate the state migration process. Right now I have 2 sets of task sequences and collections, for user state capture and state restore each. Obviously they are completely independent, leading to the fact that you cannot initiate the state restore task sequence unless you know that the state capture task sequence has already executed. Well, this is tedious and not very efficient. How are people doing automatic state migrations? Thanks!
-
- 4 replies
- 5k views
- 2 followers
-
-
I am using USMT 4 in SCCM SP2 to migrate profiles from XP to Windows 7 64bit. I can get the profiles moved just fine using a hardlink transfer. My only issue is the shortcuts transfer as well. Since the move is from 32 to 64-bit OS the shortcuts are useless if they are to any system type function. I know that the miguser.xml file must be customized, but my attempts to make changes have had no affect on the transfer. Any suggestions would be greately appreciated.
-
- 0 replies
- 3.2k views
-
-
Hi All, I'm helping my customer to prepare migration from XP to Win7 x86. I'm choose to take Offline hardlink migration using USMT 4.0 and SCCM SP2 R2,in my lab it working fine but the main problem is that client computers has following hard disk configuration, one physical drive 320 GB, c drive has about 100 gb and rest d 120. My plan is only wipe c drive and do scanstate of c drive. But problem is that users have lot off data on the root of c drive which is not in concordance with IT department policy, but this will be the big problem in migration scenario. I ned to make custom scanstate script to include this folders in migration. Please can you give me some advice how…
-
- 2 replies
- 5.8k views
-
-
Greetings, We started doing some test with USMT 3.0 using the default behavior and it worked pretty good, however as part of our implementation in our OSD we were asked to capture the following : Every personnal folder on the c: (Not c:\Windows and c:\Program Files) Every items on the root of the user profile (C:\Documents and Settings\Users), by default it only save the "My Documents" folder I have look at modifying the xml files or even creating a new xml using /genconfig but could not achieved to get this to work. Using USMT 4.0 the migdocs.xml works pretty good and save and restore everything that we need. I don't have much experience with xml lan…
-
- 0 replies
- 3.1k views
-
-
Created a USMT task sequence for computer association. The task will capture the user state on a WinXP box and will put on SMP and hold it for 5 days. Another task sequence is set to restore the data on a PC based on association. The capture task sequence will work fine. But then the restore task sequence fails. Is there a way to manually run the restore?
-
- 2 replies
- 4.3k views
-
-
Greetings, I have a question regarding using USMT 3.0 /4.0 with SCCM and i am kind of confused on what would be the best approach for our infrastructure. We have been using MDT 2010 for our OSD (using litetouch) and i was asked to get the integration with SCCM in place and also start doing some test with USMT. We need to use USMT for the following scenarios: 1-Windows XP - Windows XP (USMT 3.0) 2-Windows XP - Windows 7 (USMT 4.0) 3-Windows 7 - Windows 7 (USMT 4.0) I have create MDT Task Sequence in SCCM and with modifications to the state capture and state restore i was able to get scenarios 2-3 to work without any issues. For scenario 1, i read …
-
- 1 reply
- 5.4k views
-
-
I am having issues with Desktop Shortcuts/icons not migrating. I use WDS for booting WinPE and then MDT for the deployments. The deployments are going very well, no issues there. The issues are with user accounts with lots of shortcuts/icons on their desktops. The first few are migrated and the rest are not. If I apply the /nocompress option to Scanstate, I can see that the desktops are in the migration and if I use the /nocompress on the loadstate the desktops are migrated properly. Am I missing something? It seems that when the data is compressed stuff is being left out. Any ideas? I really need to use the compression as the network stores are small and I have many comp…
-
- 6 replies
- 6.2k views
- 1 follower
-
-
Hi all, I'm using ConfigMgr 2007 SP2 & USMT4.0 to migrate XP Machines to Windows 7 and i'm having some difficulty configuring a Remote Store using a USB HDD. I created a script to detect the USB Drive in winpe, (and set the OSDStateStorePath) which is called in an offline migration in the TS, and it successfully runs the scanstate and saves data to the USB Device. However, on running the loadstate, it doesn't know where to find the USB Device as it appears the OSDStateStorePath TS Variable isn't being read from windows, which makes sense i guess. Is this default behaviour and has anyone successfully been able to use USMT 4.0 it Remote Store using a USB Dev…
-
- 0 replies
- 3.6k views
-
-
Hi All, I am a newbie in the SCCM domain. I am trying to intgreate USMT 4.0 with SCCM R2. Could you please guide me in doing this(step by step process for the same)? My aim is to upgrade the win xp to win-7 without cleaning up the users specific applciations,files and settings.Once users have win-7 on their machine they should be able to see their settings as per win-xp machines. Also do we get any additional opting in task sequence under OSD after installing USMT 4.0(WAIK)? By googling what i have undestood is that we need to create 3 task sequence variable but i am not getting how to backup/restore works. Any help will be greatly appreciated. Regards, Sum…
-
- 5 replies
- 8.3k views
- 1 follower
-
