Skip to content

USMT

scanstate and loadstate, computer association, USMT backup of users data and settings within SCCM 2007

  1. Started by disstanda,

    Hi guys... I am searching some "REPLACEMENT" TASK SEQUENCE (wXP -> W7 / USMT / NEW HARDWARE REPLACEMENT).. Has anybody some tips / own EXPORT for me or tips how build steps in CUSTOM TASK SEQUENCE? Thanx a lot

    • 8 replies
    • 7.9k views
  2. Started by jpodlipny,

    Hi All, Since (as far as I know) you cannot switch off the encryption and compression of files when running scanstate to the SMP, we have decided to use a custom batch job where we launch USMT the "old fasioned" way, except we want to use a task sequence to start the job. Something like Attachment 1. The problem is, I can't figure out how to get the Task sequence to display the CMD console on the client computer. At the moment it runs hidden, all you see is the progress indicator of the TS, but the action halts because it's waiting for your input, to select drives etc... These are the commands I'm using: TS1: cmd.exe /c md C:\USMT - To create the folder …

  3. Started by axejuve,

    I had a problem with my SCCM migration. So I migrate the machine manually. Now I would like to restore manually USMT data captured with sccm but the problem is that I can't find the recovery key (no computer in the sccm computer association and no information in database under table STATE MIGRATION). There is a workaround to bypass the recovery key? Thanks.

    • 0 replies
    • 3.3k views
  4. Does anyone have any Task sequences that may be able to help me with this. Its pretty much a Wipe and Load Scenario. I am failing miserably. I attached the TS i am using... I am failing with the following error. Any help would be greatly appreciated. The task sequence execution engine failed executing the action (Do X64 ScanState) in the group (Run) with the error code 1 Action output: m Found alternate stream :Zone.Identifier:$DATA. This stream will be removed. Attempting to delete ADS c:\_smstasksequence\packages\luk0003f\runscanstate-offlinewindir.bat:Zone.Identifier:$DATA Entering ReleaseSource() for \\LYNNSCCM.LYNN.LOCAL\SMSPKGN$\LUK0003Freferen…

  5. Started by msfxJeep,

    I have been fighting with this for a few days. Here's the setup: Windows Server 2008 R2 SCCM 2007 SP2 - Mixed Mode USMT 4.0 Windows XP to Windows 7 Migration USMT Cert Fix applied (KB977203) If I migrate Windows 7 to Windows 7, USMT works flawlessly so I am fairly certain the SMP is setup properly. USMT on Windows XP fails during Request User State Storage. It appears to be a problem verifying the certificates but the supposed fix has been applied. Can someone shove me off in the right direction on this one? I haven't been able to find anything useful on Google. From the SMSTSLog\smsts.log file (entire log attached): <![LOG[Loading client …

  6. Started by AnnDC,

    I have noticed that data is not being deleted from my SMPs based on the deletion policy. The only step I have taken is setting the policy under Site Systems>SiteServer>Configmgr State Migration Point>Deletion Policy>Delete After. Are there additional steps that I need to take to force the deletion of data? Thanks so much for any help you have to offer.

  7. Started by Aendni,

    Hi, i tried to run a task sequence. this sequence works perfect without USMT. when i use USMT 4 i get a error message after one minute saying error code 0x00004005 during the running action: Release User State Storage. I tried different things but nothing helped.. See the smsts.log attatched Maybe some of you can help me Andy smsts.log

    • 0 replies
    • 3.2k views
  8. I was wondering if it's possible to merge all three installation scenarios into the same task sequence? Just to make it event more simple for our helpdesk staff. I know all the basic concepts regarding USMT and hard linking and I have made them work standalone but it would be very neat in my environment to accomplish this in the same task sequence. Suggested task sequence layout would be: Install Scenario: At top of the task sequence there should be a capture state group that does only run if task sequence variable _SMSTSInWinPE not equals true. And after that the OS installation should proceed as normal but skip the Resore state at the end since ther…

  9. Hello, I am looking for directions from start to finish on how to set up USMT 4.0 in SCCM. I have a working OSD task sequence, but would like to incorporate capture user settings and files and store them on a network server and then apply them to a different machine (both windows 7). I have found directions on how to configure hard link, but I am not interested in that currently. Would love the help! Thanks

  10. Hi I've been trying the to use the example task sequence posted by Niall Brady, but continue to have the following error crop up at the "Capture User Files and Settings" step. Does the "/hardlink is not a valid option" indicate a problem with the version of USMT? I've upgraded the WAIK, and my package is pointing to the USMT directory (including the x86 and AMD64 subs, so I'm pretty sure I'm trying to run USMT 4.0). Any suggestions? The task sequence execution engine failed executing the action (Capture User Files and Settings) in the group (Capture User Files and Settings) with the error code 2147942403 Action output: pp.xml" /i:"C:\_SMSTaskSequence\Packages\…

  11. Started by Mike S,

    I have finally managed to create a working task sequence that will migrate an XP machine to Windows 7 that will also include only domain user profiles from the last 15 days. Unfortunately, some unwanted baggage is also restored. I have a custom.xml file that takes care of this I wish to incorporate into my task sequence. I know the custom.xml file works, because we can run it manually without any errors. When I add the custom.xml file to the list of files used during the load state task, I get an interesting error in the advertisement.... The task sequence execution engine failed executing the action (Restore User Files and Settings) in the group (Restore User Fil…

  12. Started by clane,

    I am having trouble getting my USMT task sequence to work. I am running SCCM R2 with SP2 on Server 2008 SP2 with SQL2005 SP3 when I run this task it fails within seconds with the error code 0x80004002. I have tried several fixes, starting with removing KB 974571 on the server and client, then re-installing the PXE service, system health validator and distribution points as well as uninstalling and re-installing the network access protection client agent but nothing works. Can anyone help? I have the attached the only log I have that shows any information about this issue (based on the timestamp). smsts-20101001-142057.log

  13. Started by thadkew,

    Any way to capture the direct IP printers in USMT? I've used this as a migprint.xml file: <?xml version="1.0" encoding="UTF-8"?> <migration urlid="http://www.microsoft.com/migration/1.0/migxmlext/migprnt"> <!-- This component migrates the printers and network drives --> <component type="System"> <displayName>Printers and Network Drives</displayName> <role role="Settings"> <rules context="UserAndSystem"> <include> <objectSet> <pattern type="Registry">HKCU\Printers\* [*]</pattern> …

    • 0 replies
    • 3.8k views
  14. Started by shawn,

    Hello, We are having an issue using USMT Side by Side. We have gotten In-Place to work but not Side by Side. We are attempting to use SMP. In the SMSTS log we get OSDStateStorePath TS Environmental variable is empty. Failed to construct commandline. There are no scanstate or loadstate logs. We are relatively new to USMT and are pulling our hair out trying to make this work. Any help or direction you could give us would be appreciated. Thanks, Shawn

    • 1 reply
    • 3.9k views
  15. Started by SHIYAS,

    Hi, I have a xp client on domain static ip address, i am going to migrate to windows 7 through SCCM 2007 SP2 R2, my question is USMT it will migrate same static ip address to windows 7, or it will use default dhcp address... please help me...

    • 3 replies
    • 5.3k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.