Jump to content


Leaderboard

Popular Content

Showing content with the highest reputation since 06/18/2020 in Posts

  1. Thanks for your guidance, it is a very helpful! I did all the steps on my test infrastructure, though I had a reduced set of virtual machines. It seems to me that there is an error in section 5 (maybe my comment will help other people) You suggest to execute the command: certutil -f -dspublish "E: \ ROOTCA_windows noob Root CA.crt" RootCA Where RootCA , as you write, is the host name of offline Root CA, however certutil helps us: CertUtil [Options] -dsPublish CertFile [NTAuthCA | RootCA | SubCA | CrossCA | KRA | User | Machine] ... CertFile - certificate file to
    3 points
  2. Hi, I reviewed the Task Sequence (for which thanks a million!) and I believe the reason for 'error 87:parameter is not correct' in two of the steps you disabled for the time being is the wrong dism parameter: DISM.exe /image:%OSDisk%\ /Set-UILanguage:%OSDUILanguage% that should be-> DISM.exe /image:%OSDisk%\ /Set-UILang:%OSDUILanguage% Similarly Set-UILanguageFallback should be changed to Set-UILangFallback. I did not have enough time to test that one myself yet but according to DISM documentation Set-UILang is the parameter name that exists.
    2 points
  3. normally what I do is uninstall the existing ADK, restart the server, then install the latest applicable ADK, but it all depends on what version of ADK you have installed, and whether it's compatible with 2103 or not here's the list of supported ADK's https://docs.microsoft.com/en-us/mem/configmgr/core/plan-design/configs/support-for-windows-10#windows-10-adk
    1 point
  4. Introduction This multi-part guide will show you how to install the latest baseline version of Configuration Manager from Microsoft. The latest available baseline version is System Center Configuration Manager (Current Branch) version 1902 as of April the 10th 2019. I blogged how to upgrade to 1902 here. This guide is aimed a new installations of SCCM. Baseline media is used to install new ConfigMgr sites or to upgrade from supported versions, for more information about baseline media please see my blog post here. This series is broken down into the following parts:- Part 1 -
    1 point
  5. I can definitely confirm that this guide works. In truth, there aren't many alternative ways to install this, just a few. But it would be practically the same with hopefully the same result. Do not install the PKI on DC and for simlpe deplyoments forget the OID and use the standard one.
    1 point
  6. Make sure the MW is ENABLED. If you have these configured, but the checkbox is not checked, the MW is disabled and ignored. I was able to find this by running this report : Monitoring=> Overview=> Reporting => Reports =>Software Distribution -Collections => Maintenance windows available to a specified Client Here I saw that the MW was DISABLED, et voila, I had the explanation why my clients ignored the MW.
    1 point
  7. This first thing you are going to what to do is understand where the data that you want existing within CM. These two links will help you with that. https://docs.microsoft.com/en-us/mem/configmgr/develop/core/understand/sqlviews/software-updates-views-configuration-manager https://www.informit.com/store/system-center-configuration-manager-reporting-unleashed-9780134466811 .
    1 point
  8. this site will show you how to create the .ISO then use rufus to put the .iso on boot media.. I use USB drives http://www.sccm.ie/configure-sccm-2012/17-create-a-boot-image-for-os-deployment-without-pxe-environment
    1 point
  9. Introduction This is part 3 in a series of guides about cloud attach in Microsoft Endpoint Manager, with the aim of getting you up and running with all things cloud attach. This part will focus on creating a Cloud Management Gateway (CMG). This series is co-written by Niall & Paul, both of whom are Enterprise Mobility MVP’s with broad experience in the area of modern management. Paul is 4 times Enterprise Mobility MVP based in the UK and Niall is 10 times Enterprise Mobility MVP based in Sweden. In part 1 we configured Azure AD connect to sync accounts from the on premise infrast
    1 point
  10. Introduction This is part 2 in a series of guides about cloud attach in Microsoft Endpoint Manager, with the aim of getting you up and running with all things cloud attach. This part will focus on preparing your environment for a Cloud Management Gateway (CMG). This series is co-written by Niall & Paul, both of whom are Enterprise Mobility MVP’s with broad experience in the area of modern management. Paul is 4 times Enterprise Mobility MVP based in the UK and Niall is 10 times Enterprise Mobility MVP based in Sweden. In part 1 we configured Azure AD connect to sync accounts from
    1 point
  11. This series is comprised of different parts, listed below. Part 1 - Introduction and server setup Part 2 - Install and do initial configuration on the Standalone Offline Root CA Part 3 - Prepare the HTTP Web server for CDP and AIA Publication Part 4 - Post configuration on the Standalone Offline Root CA Part 5 - Installing the Enterprise Issuing CA Part 6 - Perform post installation tasks on the Issuing CA Part 7 - Install and configure the OCSP Responder role service Part 8 - Configure AutoEnroll and Verify PKI health (this part) In part 1
    1 point
  12. Yeh whilst an option i just decided to go the destroy way so we have packages to remove all the unneeded software and as mentioned above modified the office install to attempt to remove office whilst also supressing error codes. PSAPPDEPLOY code is Execute-Process -Path "$dirFiles\setup.exe" -Parameters "/CONFIGURE remove.xml" -ContinueOnError $true -IgnoreExitCodes '*' and remove xml is below - not sure i need the remove all true whilst also calling out products but the reality sometimes doesnt match the documentation with Microsoft <?xml version="1.0"
    1 point
  13. Awesome, I'm glad to hear it ! now make sure you check out the rest of my guides 🙂 There is plenty to learn (such as PKI, Tenant Attach, Bitlocker Management and more)
    1 point
  14. actually everything is now working! your guides worked perfectly, i just needed to back and understand and re-read the scripts! I am new to SQL so my understanding of media, service accounts etc was very very small. After using updated ssm18, new CU22 update, and making sure i am using the domain specified account mentioned my script.....Config Mgr passed with NO errors. Genuinely appreciate the time you dedicated into your guides, respect. -
    1 point
  15. Yes, 66 and 67 must be set to see the actual situation of the device When the number of VLANs is relatively small or when the switch setting does not support ip helper, You can set a distribution point for each vlan to solve the OSD problem.
    1 point
  16. 1 point
  17. i presume the collection is setup using a query, can you share the query so we can see what you are looking for... also, have you checked that the computer is actually present in that specific OU prior to ending up in the collection ?
    1 point
  18. That is cuz you are one crazy awesome dude Niall!!! Still have my fingers crossed that we get to have that drink this summer!! Waiting to find out if we are still going to have our CTG Summit in August! 🀙
    1 point
  19. if i had a vote left Marc i'd vote for it, did you tweet it yet ?
    1 point
  20. Added this a week ago: https://configurationmanager.uservoice.com/forums/300492-ideas/suggestions/40637050-provide-support-for-bitlocker-management-with-ibcm It could use some attention and more importantly some votes! 🀙
    1 point
  21. 1 point
  22. I was able to Solve my authenticate issue. While running the site install Powershell script, I had to give the group names as the Pre-Windows 2000 as they differed slightly.
    1 point
  23. Hi all - The title states it all, really. I have created and been maintaining my site's SCCM environment for the past 9 years, with no training or aid beyond what I have gained from reading information presented by a number of patrons of this site and similar (Niall Brady, Garth Jones, Anoop Nair, and Mikael Nystrom to name some), and I was wondering what options there are for gaining some accreditation. I am based in the UK, in case this removes some options from the list!
    1 point
  24. You can import the module by exploiting the environment variables to keep it less static. Import-Module -Name "$(split-path $Env:SMS_ADMIN_UI_PATH)\ConfigurationManager.psd1"
    1 point
  25. Updating the boot media and redistributing the content to the DP after it was configured properly for PXE did the trick for me. Thanks for the tip.
    1 point
  26. On the SCCM Side, You can follow this guide to extend the schema For the rest, we have used SCCM and VMware clusters alot and find very few issues with them once you get teething issues out of the way, this includes things like vlan's/trunking etc. it can be a pain especially if your using the newer Nexus V1000 vSwitch for vSphere.. basic things i assume you'll sort out when thinking logically about it.... We separate our SCCM Central Servers from DP's as this is going to cause you alot of traffic, for our first deployment we have a couple of DP's sitting beside our SCCM Provider to
    1 point
  27. they are not there because they have been removed, see https://docs.microsoft.com/en-us/mem/configmgr/core/plan-design/changes/deprecated/removed-and-deprecated-cmfeatures
    0 points
  28. First off SW inventory is NOT reliable, you should be using CI for this. Secondly, if your SW inventory runs for more than 4 hours it will NEVER send up update results. Yes is it very common for SW inventory to run for more than 4 hours runtime (not real time). Third did you review the inventoryagent.log file to see how long it takes for SW? Did it complete? Are you sure?
    0 points
  • Newsletter

    Want to keep up to date with all our latest news and information?
    Sign Up
×
×
  • Create New...