keywan

Hi, I have an Application with EXE file and I want to deploy that to our Client machines.Is there any way that the user do not need to do anything and the Application will install automaticelly? Thanks for help Keywan

Hi, How can I deploy Office 2010 Plus via SCCM 2012 with OCT? Is there step by step guide here? Does know somebody where can I find a guide for that? Thanks for help Keywan

thanks for help and I will try that

Hi Anyweb, After press F8, I have a valid ip address from DHCP and I can ping my sccm2012. But if ping the FQDN of my sccm2012 I dont get any answer. I cannot understand why I need to add network drivers to my boot image, if I have a valid ip address and I can ping my sccm2012 server. Is it DNS problem? I have a Linux DNS server and that is not in the domain and I cannot add in the domain. But my sccm2012 server is in the domain with an Windows DNS Server. Any Idea?

Hi all, I am trying to deploy windows 7 x64. Everythin seems to work fine. If I type my PXE Password in the Windows: "Welcome to Task Sequence Wizared". After type my PXE Password I get error message (0X80004005) an the machine reboot again. I checked the smsts.log file and found out follow red highlighted error : - unknown host (gethostbyname failed) TSPxe 22.10.2012 09:09:40 856 (0x0358) - sending with winhttp failed; 80072ee7 TSPxe 22.10.2012 09:09:40 856 (0x0358) - Failed to get information for MP: http://sccm2012.test.com. 80072ee7. TSPxe 22.10.2012 09:09:40 856 (0x0358) I have to mention I had problem with drivers. But I added new drivers to my boot image. Is it still drivers problem? I suggest it is DNS issue Thanks

Hi, Is it possible to choose a operating system and depoly that in the windows "select a task sequence to run"? for example: 1) Windows 7 2) Windows 8 3) windows 2008 R2 eg,,... Thanks

Hi all, Does anyone know which version WINPE is include on SCCM 2012? If the version is 3.0, then you cannot add any x64 drivers. For that you need WINPE 4,0 Thanks

Hi anyweb, I did add new drivers to boot image and updated distribution Point". After finshed I got follow error message: Error: Boot image to update: MDT Custom PE Error: Actions to perform: Add ConfigMgr binaries Enalbe Windows PE command line support Add drivers Error: Failed to import the following drivers: Intel® 82567LM-3 Gigabit Network Connection - Failed to inject a ConfigMgr driver into the mounted WIM file Error: The wizard detected the following problems when updating the boot image. Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file The ConfigMgr Provider reported an error.: ConfigMgr Error Object: instance of SMS_ExtendedStatus { Description = "Failed to insert OSD binaries into the WIM file"; ErrorCode = 2152205056; File = "e:\\nts_sms_fre\\sms\\siteserver\\sdk_provider\\smsprov\\sspbootimagepackage.cpp"; Line = 4104; ObjectInfo = "CSspBootImagePackage::PreRefreshPkgSrcHook"; Operation = "ExecMethod"; ParameterInfo = "SMS_BootImagePackage.PackageID=\"WES00092\""; ProviderName = "WinMgmt"; StatusCode = 2147749889; };

I did press F8 and type "ipconfig" , it display "Windows IP Configuration". I did add drivers for my NIC into the boot image. If I try after adding drivers into boot image to re-distribute the boot image to the distribution points, it does not display a distribution points. I am going to my boot image-->right click and choose "Distribute Content" and I click on "Add" and choose "Distributions Points", it displayed nothing. Or do you mean I have to go to my boot image-->properties-->Content Location--Redistribute?? Could you give me a link how to add drivers into boot image? Is there on windows-noob.com? thanks for help

Hi anweb, Could you please help me to resolve my problem. When I perform a deployment via System Center Configuration Manager 2012 on a client PC(it is a physically Hardware), the PC may boot into WinPE but within a few minutes(by proparing Network Connection), it automatically reboots and does not perform the Task Sequence advertised to the PC, Examining the SMSTS.log obtained from X:\Windows\Temp when the Command Support option is enabled, I see the following error message: Failed to download pxe variable file. Code(0x00000001) PxeGetPxeData failed with 0x80004005 I have the "Intel Network card 82579LM" I get while booting an valid IP-Address from DHCP and it connect to my sccm Server and while "proparing Network Connection", it reboot the PC. Regards P.S: I see in All Systems called x64 Unknown Computer and x86 Unknown Computer, but I see my imported computer named "Windows8build" too!

It is a physical hardware. I did add new drivers to my boot image, I get while "Updating Distribution Point" error message

Hi Stijn, Could you tell me how do you insert DLLs and IVF CAT SYS?

Hi, I have the same problem. Could you explain me what do you have done?

I did hit F8 and check smsts.log and ipconfig.By typing ipconfig, it display "Windows IP Configuration" In the smsts.log I see follow Error message: Failed to download pxe variable file. Code(0x00000001) PxeGetPxeData failed with 0x80004005 Is it a driver problem or what? How can I add a new WINPE driver for NIC?

Now I can boot my machine with PXE, but It reboot by the point Preparing Network connections....... .. 1) Windows is loading files (IP :my sccm2012 server: File: \SMSboot\boot.sdi) (IP :my sccm2012 server: File: \SMSImages\dig\boot.dig2002.wim 2) Windows is starting up......... 3)Preparing Network connections....... Here reboot my machine again

thanks anyweb for fix

Hi Anyweb, I did enalbe follow: 1) "Deploy this boot image from the PXE service point" on both boot images 2) "Make available to boot media and PXE, I dont know what do you mean with that "did you enable it on the DP" Where can I do that? Here the log file Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777225" ServerName="" ServerRemoteName=""><Machine><ClientID/><NetbiosName/></Machine></Identification><PXEBootAction LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="" OfferIDTime="" PkgID="" PackageVersion="" PackagePath="" BootImageID="" Mandatory=""/></ClientIDReply> SMSPXE 09.10.2012 14:54:46 2988 (0x0BAC) Client Identity: cd1ded9f-ff30-4350-a59d-d6381c8b00b4 SMSPXE 09.10.2012 14:54:46 2988 (0x0BAC) Set media certificate in transport SMSPXE 09.10.2012 14:54:46 2988 (0x0BAC) Set authenticator in transport SMSPXE 09.10.2012 14:54:46 2988 (0x0BAC) PXE::CBootImageManager::FindMatchingArchitectureBootImage SMSPXE 09.10.2012 14:54:48 2988 (0x0BAC) Getting boot action for unknown machine: item key: 2046820352 SMSPXE 09.10.2012 16:54:02 2980 (0x0BA4) Set media certificate in transport SMSPXE 09.10.2012 14:54:48 2988 (0x0BAC) Set authenticator in transport SMSPXE 09.10.2012 14:54:48 2988 (0x0BAC) Set authenticator in transport SMSPXE 09.10.2012 14:54:48 2988 (0x0BAC) Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777225" ServerName="" ServerRemoteName=""><Machine><ClientID/><NetbiosName/></Machine></Identification><PXEBootAction LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="" OfferIDTime="" PkgID="" PackageVersion="" PackagePath="" BootImageID="" Mandatory=""/></ClientIDReply> SMSPXE 09.10.2012 14:54:48 2988 (0x0BAC) Client Identity: cd1ded9f-ff30-4350-a59d-d6381c8b00b4 SMSPXE 09.10.2012 14:54:48 2988 (0x0BAC) Set media certificate in transport SMSPXE 09.10.2012 14:54:49 2988 (0x0BAC) Set authenticator in transport SMSPXE 09.10.2012 14:54:49 2988 (0x0BAC) Set authenticator in transport SMSPXE 09.10.2012 14:54:49 2988 (0x0BAC) and so go on Tell me please that in Part using SCCM 2012 RC in a LAB - Part 7. Build and Capture Windows 7 X64 You wrote that This post has been superseded by the following post for Configuration Manager 2012 RTM. That means you dont should to use this part? If I am going to "followin post" , they link me to http://community.inv...-in-wordpress/. How can I access to the new post? Thanks

Hi anyweb again me, I have changed my Notebook and set up with desktop machine. Now I dont get any error message, but it tries to get a IP-Address from DHCP but I see only .................................... I happend nothing. If I got smspxe.log file , I see there two points: 1) Set media certificate in transport 2) Set authenticator in trasnport I see to reply both points Any Idea?

Hi anyweb, Yes I am booting my noteboot in the same network area and it the network as my Configuration Manager PXE enabled distribution point. My step for that are: 1) in the bios I put the boot option on "Network LAN" 2) booting the notebook , I see this dos message With MAC ADDR 8C:73:6E:08:76:57 GUID ####################. But I see while the booting notebook a other GUID number as in sccm2012. I am goging to "Asset and Compliance"-->Devices-->choose my notebook---properties--General, here I see a different GUID number. Is it the the problem?

Hi, I did do all of this guide. I do not use any virtual machine, I use a notebook and I boot the Notebook with Intel Network card, I get the message Media test failure, check cable and No boot filename recieved Regards

thanks, how can I do that?

Hi all, I have sometimes to deploy an application for one user or one computer. Is it possible to do that? best Regards Keywan

Hi, I know this link and I did do that until step 4 and........ I dont want to deploy Windows x64. I think from step 4 is for unclear

I have resolved that by installing the SQL 2008 R2 SP1 CUP6. Thanks very much for help

Hi there, Can someone tell me how can I deploy an application(exe or msi) on sccm2012? best Regards