Configuration Manager 2007
System Center Configuration Manager 2007, SCCM 2007, CM07
1088 topics in this forum
-
hey all, i'm trying to figure out why I can't seem to inject a couple of LAN-drivers from our new desktop-mainboards into my SCCM bootimages. Since the LAN-drivers aren't known, it won't run any TS off course. I have tried to use the built-in bootimage that comes with SCCM and I also created a new one per instructions found on www.ithastobecool.com. When I inject the drivers and want to update my DP, I get this error in the end : Error: The wizard detected the following problems when updating the boot image. Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file The ConfigMgr Provider …
-
- 0 replies
- 2.5k views
-
-
I've noticed something unusual with my Site Status reports and I'm hoping that someone could point me in the right direction of how to troubleshoot what may or may not be a problem. I've a primary site and a number of secondary sites. Looking at the Component and Site System Status reports for all of them everything is showing up as "OK" and all of them have a Summary Date that shows that they communicated within the last hour, with the exception of one of the secondary sites. That one also shows everything as "OK" but while the Site System status is from the last hour the Component Status summary is from several hours ago. It only seems to update a couple of times a …
-
- 0 replies
- 2.1k views
-
-
Hi all, Great resource here at windows noob - very easy reading and great guides for setting up SCCM! We are running ConfigMgr 2007 R3 on both server and clients. We have 1 primary site that acts as an SLP, DP, RP, MP, PXE service Point, SUP. We also have an additional server that acts as a DP only and another server for the DB We are having an issue at the moment whereby our task sequences run twice. We deploy windows 7 via either pxe boot or prestaging the boot process, and then when the os is installed and ready, the task sequence will then run again! It seems the first pass doesnt make the previous object obsolete and so it runs again. On the second pass, …
-
- 3 replies
- 7k views
- 2 followers
-
-
Dear All, I have installed SCCM 2007 & FEP 2010 Server Setup. Now i want to push client on Targit Machine. When i try to push client on targit machine nothing happens. Can any guide my about the configuration of like Client configuration, client push, distribution point, client package generation??
-
- 0 replies
- 1.9k views
-
-
Hi, I would like some advice on howto go about upgrading a Live Environment of Sccm 2007 R3 with MDT 2010 integration to MDT 2012. Im using MDT 2012 in are test environment and its working very well and I would like to upgrade the Live Environment without breaking anything. Has anyone done this ? how do I integrate it to sccm 2007 r3 once ive upgraded. Any help would be appreciated. thank you
-
- 1 reply
- 4.6k views
-
-
Hi. We have a new SCCM 2007 setup running on R2 2008 servers which is now more or less complete. We are patching and deploying apps successfully. I now need to start to use the reporting and querying functions but have a problem which is probobly caused by a mistake during the setting up of the servers. When I right click on a PC in a collection and select Add / Remove programs from the SCCM System Reports right click menu it brings up a web page saying more or less that the page cannot be found - http://server1:80/SMSReporting_DPA/Report.asp?ReportID=97&computername=workstation1 but if I change it to http://Server2:80/SMSReporting_DPA/Report.asp?ReportID=97&c…
-
- 0 replies
- 2.3k views
-
-
I have been tasked to setup a primary site at a vendor so they can image machines, shutdown, ship to site. Ideally, the local tech would turn on and they would continue on there way fairly quickly. We use SQL (BDD) to determine things like gateway, ADSite, OU, Name, etc etc, mostly gathers by gateway address which determines location etc. Listed below ar esome of the tables, etc. Database=W7Admin Table dbo.adsite_info – DefaultGateway determines ADSite Table dbo.Descriptions – 200 Columns that can be configured, we use some Table dbo.DriverPathOU – Gathers Model to assign to AD OU, also determined by ADSite Table dbo.WMIInfo – Gathers MacA…
-
- 0 replies
- 2.2k views
-
-
HI There, I am wanting to deploy office 2010 by SCCM. I have a mix of Office 2010 & 2007 manual install, some with both. Becuase of the machines having 2010 i the standard installer will fail. Anything that has both versions needs 2007 removing. I have written a script that will strip office 2010 and then install 2010. It works fine, installs on the client but it reports back to SCCM that it has failed. We are using 2007 R3. Any thoughts please? This is a copy of our scirpt. Thanks cscript OffScrub10.vbs ALL,OSE setup.exe /adminfile "Updates\FPHS-Config.MSP" set ProgramFilesPath=%ProgramFiles% "%ProgramFilesPath%\Common Files\mic…
-
- 3 replies
- 4.1k views
- 1 follower
-
-
Hi, anyone knows of any open source (free) MSI package builder? I am looking to create MSI files from EXE files for silent deployment. Thanks in advance!
-
- 1 reply
- 6.7k views
-
-
About a month ago or so our automation tools for FEP definition updates stopped processing those updates. It had been working fine for almost a year. When I run the FEPUpdates.cmd (contains this command): "C:\Program Files (x86)\Microsoft Configuration Manager\AdminUI\bin\SoftwareUpdateAutomation.exe" /AssignmentName "FEP Updates" /PackageName "FEP Updates" /UpdateFilter "articleid=2461484 AND IsSuperseded=0 AND IsEnabled=1 AND IsExpired=0" I get this error in the %Programdata%\SoftwareUpdateAutomation.log file: SoftwareUpdateAutomation execution starting. ============================================ Version: 2.1.1116.101 Command line: SiteServerNa…
-
- 0 replies
- 2.8k views
- 1 follower
-
-
Hi, We are currently upgrading over 5000 pc's and laptops to Win7 using SCCM 2007 and a FrontEnd HTA for selecting software . At the moment there is a different task sequence for every department. I have been looking into using one task sequence and a HTA to select department and Ou computer name ect. So far I just have the HTA allowing users to select and install software. Its a work in progress. Today I have just discovered UDI Wizard Designer in MDT 2012. Can anyone tell me if it is is possible to use this in SCCM 2012 to build a task sequence and if there are any tutorials out there on how todo that. It looks a lot easier than using a HTA and formatting that …
-
- 0 replies
- 4.4k views
-
-
Hello, I was wondering how can you updgrade the version of SCCM. As of now our version is 4.00.6487.2000 We have R3 installed Build number: 6487
-
- 3 replies
- 3.4k views
- 2 followers
-
-
One of my secondary sites has two entries under Site System Status for every site system . This site was deleted then reinstalled (the user at the remote site blew away the server before I could uninstall the site, so I deleted the site and reinstalled it, I think that this is what caused it. Is there a way to remove the incorrect entries?
-
- 0 replies
- 2.1k views
- 1 follower
-
-
I have a problem with SCCM client finding 3G/WIFI clients once it is installed on the laptop, SCCM has a large number of errors because it cannot connect to the client using 3G/WIFI. Is there a way to ignore these clients, so that they are only polled when connected in the office? As the 3G/WIFI connection can be really slow sometimes I was thinking that once a month the client was brought into the nearest office and connected via ethernet to the LAN that way SCCM could update the machine/ Any advice/help most graciously accepted. Kind Regards Dave
-
- 2 replies
- 3.5k views
- 1 follower
-
-
hi, I've inherited an sccm site that has a site assignment issue and i can't seem to find the problem. config : schema extended (confirmed CM is publishing to SM container and creating MP and SLP containers), ip subnets added as boundaries (there are no subnets in AD Sites and Services), checked all the various logs, hman, ccm mplogs etc all are clean no errors. problem with new clients when I Discover site assignment it fails , unsuccessful. did all sorts of troubleshooting from reviewing locations services, client location logs etc, no definitive answer to resolve. but when I add the the default AD Site as a Boundary , then everything works (Site assignm…
-
- 3 replies
- 3k views
-
