Deploy XP
161 topics in this forum
-
-
hi i am working on a deployment with windows xp sp 3 If i advertise the task sequance and i have the error can't locate the content. Can someone help me? Greets
-
- 7 replies
- 7.6k views
- 1 follower
-
-
My Little Disclaimer: If this information is elsewhere in the forums, I could not find it using the search function. Feel free to correct me. I have been for a couple days now prepping our SCCM server and have now with success completely configured it and all our application packages. All is successfull from boot media and pxe. Now my final task to make the process complete remote for our enterprise. As this is a new system in our network. None of our computers currently have the configmgr client installed. Is this client required for a remote deployment. I have created the mandatory advertisements and computer associations for the labs and rooms.…
-
- 0 replies
- 4.8k views
-
-
Hello, I just need some advice on XP deployment with SCCM With a small reference image I don't have too much of an issue. With an image loaded up with our students "base" software(things like MSDN, Visual Studio 2008, VS6 etc) the image is 9.8GB compressed, (25GB uncompressed) and takes forever to deploy with SCCM. I am still deploying software on top of that to keep the image size to a minimum but I couldnt possibly deploy all the software needed via task sequence due to the sheer volume! The problem is the 9.8GB image takes 45 minutes to transfer, 20 minutes to unpack then 10-15 mins to apply and thats without the rest of the task sequence! If I did the same deplo…
-
- 2 replies
- 8.1k views
-
-
Hi All, I am unable to deploy XP using PXE boot, while booting through PXE, before getting Task Sequence selection option it is automatically restarting, it is grabbing the IP address from the DHCP server. please advise.
-
- 2 replies
- 7.4k views
-
-
Hi, I created a wim file to deploy XP SP3. It's working fine but I installed a OEM version and I need to activate each time I deploy. Is there a solution to auto activate each installation from sccm? Thank you.
-
- 3 replies
- 4.9k views
-
-
Hi everyone, I'm trying to build my first XP image with OSD. Booting from PXE. The computer I use is in the SCCM database. I did deploy Windows 7 on it many times with OSD, booting from PXE. Everything works great. But I can't do the same if I push an XP OS to that computer. I have followed every step outlined in this guide : http://www.windows-noob.com/forums/index.php?/topic/570-how-can-i-deploy-windows-xp-sp3-using-sccm-2007-sp1-part-1/ It stops right after WinPe is initializing the network connections. smsts.log is attached and it contains this error : Client does not have an ID. Please ensure you have created a record for this client in the …
-
- 2 replies
- 7.9k views
- 1 follower
-
-
Hi, I already added before the drivers to my boot image but now I don't know why when I try to do the same thing I have this error message. Error: Boot image to update: Microsoft Windows PE (x86) Error: Actions to perform: Add ConfigMgr binaries Disable Windows PE command line support Add drivers Success: Drivers that will be included: Intel® ESB2 SATA AHCI Controller Error: Failed to import the following drivers: Intel® 82567LM-2 Gigabit Network Connection - Failed to inject a ConfigMgr driver into the mounted WIM file Error: The wizard detected the following problems when updating the boot image. Failed to inject a Co…
-
- 0 replies
- 7.3k views
-
-
Hi , I followed the article to deploy XP sp3 using sccm 2007 sp1 here.I got the boot loading option in client while booting PXE... 1. Client recieves IP fro DHCP 2.It recieves boot loader 3.But immidiately restarts Note:Client is in MS Virtual PC 2007 512MB RAM,20GB HDD Please help me to resolve the issue!!!! I have attached the Screen shots step by step!!! sccm_client_error.doc
-
- 3 replies
- 6.8k views
-
-
Hi, I have a strange problem. I did an image WIM for a HP DC7800 and I deployed the image. When I try to log on to the domain I can't because I don't have the choice. So I log with the local admin and XP ask me the drivers for my network card. I don't understand why because it was already installed before. I created an another image for a HP DC7600 and it working fine. The network card is Intel 82566DM-2. Could you help me please?
-
- 4 replies
- 5.3k views
- 1 follower
-
-
Hi, I'm looking to create a sequence which installs Microsoft Windows XP SP3, Office 2003 (7), Adober Reader 9 and a few other local apps. I have created a base WIM file for just Windows, and added a task for installing each subsequent piece of software however this proves to be a slow way of doing it. SO, I created a new build with this software already installed and captured it using IMageX. I have the WIM file and can deploy this to a device, however i want it to automatically join it back to the domain with the old computer name. This is where the issue starts... The WIM image is name WIMCapture and not joined to a domain (as was good practice when creatin…
-
- 3 replies
- 4.5k views
-
-
Hi, I'm trying to remotely reimage a device that currently has the ConfigMgr client installed on it. I have followed the instructions on this forum, and I'm not sure where it's going wrong. Before starting the imaging process i tested my boot images and ensured that i had network connectivity from them. I assign a device to the Build and Capture XP collection and the device restarts into the windows PE environment, it then begins to format the C: Drive and i get the following error Task Sequence: Build and Capture XP SP3 has failed with the error code (0x80070002). For more information please contact your system administrator or helpdesk operator UNfortuna…
-
- 4 replies
- 10.8k views
-
-
I have recently upgraded my SCCM install to SP2 and have started having problems deploying images to desktops. Currently I deploy to Dell Latitude E6500's and Optiplex 960's. The applying image action is going really slow on the 960's for some reason, usually taking over 20 hours to deploy an image. A similarly sized image on the E6500's will complete in about 15 minutes. My smsts log isn't throwing any errors during the image process either. I'm not sure if this is an IIS issue or I need to update data in Config Mgr. If anybody has any input I would really appreciate it. Thanks
-
- 1 reply
- 3.7k views
-
-
Hi, I created a task sequence which wipe the C and install my image on it without change the D partition. But I'd like to create another task sequence to restore all my image which has 2 partitions (C and D) and I don't know how to do this. Thank you
-
- 0 replies
- 2.8k views
- 1 follower
-
-
I have set-up a task sequence to deploy a wim I have captured and all is almost good with that. I am wondering what is the best practice to add in apps after this. I have apps like adobe, flash, ie spell etc to install after the image is dropped on the box. I didn't want to add them into the wim because i wanted to make it dynamic. So, it is easy to upgrade versions of 3rd party apps. Should I just add steps in the TS or is there an easier way to do this? Thanks for any suggestions.
-
- 0 replies
- 2.7k views
-
