Skip to content

Deploy XP

  1. Started by Loganater,

    Good morning, I need your help since my review is due tomorrow. I have no problem deploying Windows 7 but XP is a headache! Right now I am receiving the failed to connect to error. I have updated the DP, and verified files. Attempting to connect to "\\DST-SCMT4.DSTT.DST.LOCAL\SMSPKGC$\DST00026". TSPxe 11/2/2010 10:18:46 AM 1184 (0x04A0) Retrying download... TSPxe 11/2/2010 10:18:46 AM 1184 (0x04A0) Attempting to connect to "\\DST-SCMT4.DSTT.DST.LOCAL\SMSPKGC$\DST00026". TSPxe 11/2/2010 10:18:49 AM 1184 (0x04A0) Retrying download... TSPxe 11/2/2010 10:18:50 AM 1184 (0x04A0) Attempting to connect to "\\DST-SCMT4.DSTT.DST.LOCAL\SMSPKGC$\DST00026". TSPxe 11/…

  2. Ever struggled with a 0x0000007B BSOD when deploying a Windows XP SP3 image? Struggle no more, here is a working driver set and sysprep mass storage section for most current hardware models... Instructions for adding the sample files to MDT 2010 Lite Touch In these steps I assume you have a deployment share in the D:\MDTProduction folder, Windows XP Pro SP3 (full source) imported to the D:\MDTProduction\Operating Systems\Windows XP Pro SP3 Eng x86 Unattend folder, and that you created a Task Sequence named Windows XP Pro SP3 Eng x86 Unattend Task Sequence. Step 1 - Download sample files 1. Download and extract the sample files to D:\Setup\Sample Fil…

    • 1 reply
    • 10.4k views
  3. I followed the direction on this site to setup a Build and Capture XP image. I get past the "setup windows and configmgr" step, but after the restart, instead of resuming with the windows setup, it prompts me to insert a windows SP3 CD-ROM? What is wrong? I am running the task sequence on a VMware machine.

    • 0 replies
    • 3.4k views
  4. Started by qaisar,

    SCCM 2007 SP2 R2 + MDT 2010 Integrated OS being deployed is Windows XP SP3 (wim file). This image is created manually and sysprep is run before manually capturing the wim file. Task Sequence (Created using "create Microsoft Deployment Task Sequence" wizard) ***************************************************************************** Problem 1: After the PXE boot I see this window Title: Task Sequence Wizard Message: The media is not password protected. Please click next to continue. I have added SkipBDDWelcome=YES in both Bootstrap.ini and CustomSettings.ini but it did not help, I still see this window *****************************************…

    • 1 reply
    • 4.5k views
  5. Started by Scott,

    Hi We have a single TS which will image both Intel and AMD devices, however the only AMD device that we have to test on, the drivers are not installing correctly. They are being copied to the C drive of the device, but are not installed, even by applying a driver package or automatically apply drivers. Currently, the workaround is to install the software that was downloaded with the software, but this also installs the rubbish software with it! (ATI Graphics and HD Audio) Has anyone ever had this? How did you get around it? Cheers! Scott

    • 4 replies
    • 6.5k views
  6. Started by Kevin79,

    I have an OSD TS that mostly works fine. The OS is installed and the ConfigMgr client is also installed. The problem is that none of the drivers are installed. The drivers for my NIC and chipset are added to SCCM and a driver package was created. My TS has the section "Apply Device Drivers" and is set to "Install all compatible drivers" and "Consider drivers from all categories". My NIC or chipset drivers are never installed though. I doesn't look like they are copied over during the OS either. The folder c:\drivers is created and has the file INFCACHE.1. Any idea's how I can find out what is wrong?

  7. Started by MaWi,

    Hi, I'm looking for a way to create a Task Sequence that wil partition/format the c-partition but leaves the d-drive intact during OSD. Does anyone have an idea how to do this? Greetings, Mario

    • 3 replies
    • 4.7k views
  8. Hi. i am to deploy Windows XP SP3 as the bare matel install using SCCM Server,however i want to combine Office 2007,adobe and other applicaitons with the Windows XP SP3 Image and deploy it as one package. Any document related to it will be of great help. Fasi.

  9. Started by SabHaZi,

    hello, I have a small question. Is it possible to deploy a TS (with xp in it) on a collection. What i did was the following: - i created a new collection - 1 device (computer) is member of that collection - i have created a task sequece (this works good with a USB media) - i have made a advertisement on the new collection Nothing is happening in windows? can anybody help me. I am russning sccm 2007 sp2 Thanks

    • 3 replies
    • 4.6k views
  10. Started by Zero,

    hey all, just wondering if anyone knows a way to convert a stand-alone dvd created by SCCM 2007 r2 to a bootable USB without receiving the HAL32.DLL error warning? The issue is, our SCCM server is a virtual machine using vsphere, and therefore has no usb passthrough support. so for me to get a bootable usb key, i have to extract it onto a usb key. so what i've done so far is created a stand-alone DVD which is tested and works, and then followed the steps for formatting a usb key to fat32, making it active and then copying the contents of the dvd onto the USB key - the issue i have is that while this allows me to boot off of the USB key successfully, apon a…

    • 3 replies
    • 7.5k views
  11. Started by RedDR,

    first off .. fantastic site .. been comming here for a few weeks now while im deploying and this is definately cool that people are putting so much effort into making it easy .. BIGUPS! Now .. ive been searching for about 2 hours now .. my eyes are going square .. and the double shot of coffee i just had is starting to give me a headache! Im trying to set the computer name. Been done before and probally easy but .. it eludes me. Ive created a task sequence and set the OSDComputername variable and left the value field blank ... sweet .. can specify the computer name when it boots ... but ... I want to use the model and serial number combined as the compute…

  12. I have created a media DVD stand-alone from task sequence to deploy Windows XP SP3. I have added a sequence to deploy a software but using media it fails at this step, tried it on two different laptops same problem. Using SCCM and PXE no problem, but when i use DVD I get Error 80002004 in logs. I have attached logs please can some help. Thanks. Jeet smsts.log

    • 4 replies
    • 9.4k views
  13. Started by Kevin79,

    I followed Anyweb's guide on building and capturing XP (but it didn't finish). I have a few questions... For the network drivers, do I import them in to the "Drivers" folder or do I have to do something else with them? We currently use MDT to deploy images and any computer can be imaged, they just need to boot to PXE. No configuration needed. Once in MDT, they get an option of which task sequence they want to use. Can SCCM be set up like this? I don't want to have to go in and tell SCCCM the MAC address of each computer before putting an image on because we have people in different locations doing them (but they aren't IT people). They also need a menu to choose t…

  14. Hi guys, I've a small inquiry, i have DHCP server (10.0.0.199) and SCCM server (10.0.0.197), before i create a PXE role, the DHCP server assigns IPs to client machines normally with no problems and then it show me a message: (contacting SCCM 10.0.0.197). But after i create a PXE role to deploy XP SP3, the client machine stuck and does not take IP, it show this message: ( DHCP....| ). So, what do you think the problem come from in your opinion? Thanks & B.R

    • 4 replies
    • 5.1k views
  15. Started by josorio,

    Hi All, I have SCCM 2007 R2 and MDT 2010 Update 1. So, I made the task sequence and created its advertisment and finally apply the advertisement to client machine. Client Machine started by PXE and download winpe, so machine restarted and loaded winpe. After "Windows is Starting Up" and "Preparing Network Connections" messages during winpe the client machine restart and show the following: ----------------------------------------------------------------------------------------------------- Download WDSNBP… Architecture x64 The details below show the information relating to the PXE boot request for this computer Please provide these details…

    • 4 replies
    • 9.4k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.