Arcuss88

I'm getting the exact same problem. The OSD Task Sequence completes without errors, but the client is unable to register right away. The only way I'm able to get the machine to register correctly to log in and restart the workstation. I already have a restart as the last step of my TS, but this doesn't help. I don't recall this happening before installing 1702, but I could be wrong...

Thanks for the help, the TechNet article helped a lot and answered some confusion I was also having as well. I am using SCCM 2012 R2 SP1 so WinPE 5.0 is natively supported for customizations. I was trying to take a shortcut and copy the existing boot WIMs and just modify them but that didn't seem to do the trick (and after thinking about it some more I probably shouldn't trust it anyway since the guy I took over the environment from had left me some land mines elsewhere). Solution Summary: I was able to add the WinPE 5.0 from Windows ADK for 8.1 using the "Add Boot Image" wizard. I then updated it to one of my DPs without making any changes. Once it was successfully at the DP I added the driver I needed, Optional Components, and background. The final piece I was missing was to check the box on the Data Source tab to "Deploy this boot image from the PXE-enabled distribution point" and update the Distribution Points again. Thanks for the help and I hope my little sna-foo saves someone else some time.

WOW, hadn't seen this TechNet article, This addesses a lot of the confusion I've been having! I'll read up on this and make sure I'm using the correct WinPE version for the SCCM version I have. I'll report back once I get it worked out, thanks a bunch!

Hey all, I'm at my wits end here. I'm trying to add support for a new generation of laptops to my SCCM 2012 R2 TS. I have already gone through the trouble of gathering all the required drivers for the new models and created new Driver Packages only to find that the new models all use a newer\different NIC driver than the previous generation. No big deal I think, I'll just create a new boot WIM for testing, get the appropriate drivers for WinPE and I'm good! Well, not so fast. For some reason when I add the new boot WIM to my testing Task Sequence and try to PXE, the machine is unable to pick up the OSD deployment. If a revert back to the original boot WIM in the same TS it picks up, but there are no NIC drivers. I've pretty much narrowed it down to being some sort of issue with my new boot WIM but can't seem to figure out what. I'll be upfront and say that I have not had to create a new boot WIM before so it's possible I FUBAR'd something during this process. I just used the "Add new Boot WIM" function and pointed the wizard at the Win ADK supplied boot WIM. If that's not right, maybe someone can point me in the right direction. I've confirmed the new boot WIM is at my local DP the new boot WIM is the same version as the working one, WinPE 5.0 (6.3 \ Win 8.1) I've confirmed my drivers are the appropriate version and architecture and the correct model I can't even get any logs because when I use the new boot WIM it doesn't get past PXE. Below are the last few lines of the PXE before the machine reboots: Message from Administrator: Configuration Manager is looking for policy Contacting Server: [local DP IP]....... TFTP Download: smsboot\x64\abortpxe.com PXE Boot aborted. Botting to next device... PXE-M0F: Exiting Intel Boot Agent

Possibly a silly question, but I didn't see it mentioned in any of the above replies or original post, but the NIC driver specified for WinPE was added to the Boot WIM and updated on the DPs right?

Why would you need to use a batch file to uninstall? If you're using SCC '07 just create a collection where that version of Java is installed (Listed in Programs and Features I believe is the option) and create a Package where the Program command line is your msi.exe uninstall string. If you're using SCCM '12 just create an Application with the MSI (if you have it) and the uninstall will be populated. Then just deploy the Application selected "Uninstall" during the wizard. IMO I try to avoid using batch files as it tends to overcomplicate simple tasks sometimes. I can elaborate more if the above isn't clear

Wanted to provide an update on this question I posed. On the 9th when I posted this question I was at a total loss and didn't know what was wrong or how to fix it. I came in this morning and just for grins and giggles I went ahead and re-ran the Task Sequence on the machine in question. Came back roughly an hour later and it had completed successfully... no issues... All Drivers installed, SCCM Client installed, All Software installed, and BitLocker encryption started! Still don't know what the cause\fix was unfortunately, but I'm thinking whatever it was it was machine specific. Unfortunately I don't have another machine of the same model to confirm this though.

I am trying to build support for additional models into my Task Sequence and feel this model is fighting me the whole way. I have been able to identify the drivers required for this desktop and have been able to confirm that my SCCM Driver Package is installing all devices correctly. With that said though I am getting an error during the installation of the SCCM Client only on this model. The same WIM is used on another model without issue. With all that being said here is what I'm seeing. WIM is applied, Driver Package is correctly selected and applied, the "Setup Windows and ConfgMgr" task is run and copies the required files locally. The machine reboots and the "Setup Windows and ConfgMgr" task continues for about 2 secs, then exits, the machine reboots again and instead of continuing the Task Sequence it boots into the Windows 7, WIM only. Below is a sample of the ccmsetup.log <![LOG[==========[ ccmsetup started in process 2540 ]==========]LOG]!><time="12:03:00.785+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:9437"> <![LOG[Running on platform X64]LOG]!><time="12:03:00.925+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="util.cpp:1837"> <![LOG[Launch from folder C:\_SMSTaskSequence\OSD\DEV00018\]LOG]!><time="12:03:00.925+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:721"> <![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="12:03:00.925+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:727"> <![LOG[Could not create WMI locator class (80040154)]LOG]!><time="12:03:01.112+480" date="01-09-2015" component="ccmsetup" context="" type="3" thread="2544" file="wminamespace.cpp:264"> <![LOG[CheckAndLogOSInformation failed with 0x80040154]LOG]!><time="12:03:01.112+480" date="01-09-2015" component="ccmsetup" context="" type="2" thread="2544" file="util.cpp:1938"> <![LOG[Ccmsetup command line: "C:\_SMSTaskSequence\OSD\DEV00018\ccmsetup.exe" /useronly /source:C:\_SMSTaskSequence\OSD\DEV00018 /config:MobileClient.TCF /status:632]LOG]!><time="12:03:01.143+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:3590"> <![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="12:03:01.143+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:3775"> <![LOG[Command line: "C:\_SMSTaskSequence\OSD\DEV00018\ccmsetup.exe" /useronly /source:C:\_SMSTaskSequence\OSD\DEV00018 /config:MobileClient.TCF /status:632]LOG]!><time="12:03:01.143+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:3776"> <![LOG[Copying config file from C:\_SMSTaskSequence\OSD\DEV00018\MobileClient.TCF to folder C:\WINDOWS\ccmsetup\. Return result: 0x0]LOG]!><time="12:03:01.190+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:4173"> <![LOG[SslState value: 224]LOG]!><time="12:03:01.190+480" date="01-09-2015" component="ccmsetup" context="" type="0" thread="2544" file="ccmsetup.cpp:4425"> <![LOG[CCMHTTPPORT: 80]LOG]!><time="12:03:01.190+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:8617"> <![LOG[CCMHTTPSPORT: 443]LOG]!><time="12:03:01.190+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:8632"> <![LOG[CCMHTTPSSTATE: 0]LOG]!><time="12:03:01.190+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:8650"> <![LOG[CCMHTTPSCERTNAME: ]LOG]!><time="12:03:01.190+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:8668"> <![LOG[FSP: ]LOG]!><time="12:03:01.190+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:8720"> <![LOG[CCMFIRSTCERT: 1]LOG]!><time="12:03:01.190+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:8778"> <![LOG[Config file: C:\WINDOWS\ccmsetup\MobileClientUnicode.tcf]LOG]!><time="12:03:01.284+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:4539"> <![LOG[Retry time: 10 minute(s)]LOG]!><time="12:03:01.284+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:4540"> <![LOG[MSI log file: C:\WINDOWS\ccmsetup\Logs\client.msi.log]LOG]!><time="12:03:01.284+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:4541"> <![LOG[MSI properties: INSTALL="ALL" PATCH="C:\_SMSTASKSEQUENCE\OSD\DEV00018\HOTFIXES\CLIENT\X64\CONFIGMGR2012AC-R2-KB2905002-X64.MSP" SMSPROVISIONINGMODE="1" SMSSITECODE="USD" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="0" CCMFIRSTCERT="1"]LOG]!><time="12:03:01.284+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:4542"> <![LOG[Source List:]LOG]!><time="12:03:01.284+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:4550"> <![LOG[ C:\_SMSTaskSequence\OSD\DEV00018]LOG]!><time="12:03:01.284+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:4566"> <![LOG[MPs:]LOG]!><time="12:03:01.284+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:4569"> <![LOG[ None]LOG]!><time="12:03:01.284+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:4572"> <![LOG[Could not create WMI locator class (80040154)]LOG]!><time="12:03:01.284+480" date="01-09-2015" component="ccmsetup" context="" type="3" thread="2544" file="wminamespace.cpp:264"> <![LOG[No version of the client is currently detected.]LOG]!><time="12:03:01.284+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:2748"> <![LOG[Failed to create CLSID_CTaskScheduler instance (0x80040154).]LOG]!><time="12:03:01.284+480" date="01-09-2015" component="ccmsetup" context="" type="3" thread="2544" file="wintask.cpp:600"> <![LOG[Updated security on object C:\WINDOWS\ccmsetup\.]LOG]!><time="12:03:01.409+480" date="01-09-2015" component="ccmsetup" context="" type="0" thread="2544" file="ccmsetup.cpp:9281"> <![LOG[A Fallback Status Point has not been specified. Message with STATEID='100' will not be sent.]LOG]!><time="12:03:01.409+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:9763"> <![LOG[Downloading file C:\_SMSTaskSequence\OSD\DEV00018\ccmsetup.exe]LOG]!><time="12:03:02.423+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:5685"> <![LOG[Downloading C:\_SMSTaskSequence\OSD\DEV00018\ccmsetup.exe to C:\WINDOWS\ccmsetup\ccmsetup.exe]LOG]!><time="12:03:02.423+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:5769"> <![LOG[File download 16% complete (262144 of 1614520 bytes).]LOG]!><time="12:03:02.439+480" date="01-09-2015" component="ccmsetup" context="" type="0" thread="2544" file="ccmsetup.cpp:9185"> <![LOG[File download 32% complete (524288 of 1614520 bytes).]LOG]!><time="12:03:02.439+480" date="01-09-2015" component="ccmsetup" context="" type="0" thread="2544" file="ccmsetup.cpp:9185"> <![LOG[File download 48% complete (786432 of 1614520 bytes).]LOG]!><time="12:03:02.439+480" date="01-09-2015" component="ccmsetup" context="" type="0" thread="2544" file="ccmsetup.cpp:9185"> <![LOG[File download 64% complete (1048576 of 1614520 bytes).]LOG]!><time="12:03:02.439+480" date="01-09-2015" component="ccmsetup" context="" type="0" thread="2544" file="ccmsetup.cpp:9185"> <![LOG[File download 81% complete (1310720 of 1614520 bytes).]LOG]!><time="12:03:02.439+480" date="01-09-2015" component="ccmsetup" context="" type="0" thread="2544" file="ccmsetup.cpp:9185"> <![LOG[File download 97% complete (1572864 of 1614520 bytes).]LOG]!><time="12:03:02.439+480" date="01-09-2015" component="ccmsetup" context="" type="0" thread="2544" file="ccmsetup.cpp:9185"> <![LOG[File download 100% complete (1614520 of 1614520 bytes).]LOG]!><time="12:03:02.439+480" date="01-09-2015" component="ccmsetup" context="" type="0" thread="2544" file="ccmsetup.cpp:9185"> <![LOG[Download complete.]LOG]!><time="12:03:02.439+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:5867"> <![LOG[CreateInstance of CLSID_BackgroundCopyManager failed with 80040154. Unable to check BITS version]LOG]!><time="12:03:03.688+480" date="01-09-2015" component="ccmsetup" context="" type="3" thread="2544" file="util.cpp:1319"> <![LOG[This operating system does not contain the correct version of BITS. BITS 2.5 or later is required.]LOG]!><time="12:03:03.688+480" date="01-09-2015" component="ccmsetup" context="" type="3" thread="2544" file="ccmsetup.cpp:1957"> <![LOG[A Fallback Status Point has not been specified. Message with STATEID='321' will not be sent.]LOG]!><time="12:03:03.688+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:9763"> <![LOG[Deleted file C:\WINDOWS\ccmsetup\ccmsetup.exe.download]LOG]!><time="12:03:03.688+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:9493"> <![LOG[CcmSetup failed with error code 0x80040154]LOG]!><time="12:03:03.688+480" date="01-09-2015" component="ccmsetup" context="" type="1" thread="2544" file="ccmsetup.cpp:10879"> The thing that is bothering me is the "This operating system does not contain the correct version of BITS. BITS 2.5 or later is required." line. This makes absolutely NO sense, the OS is Windows 7 SP1, the same WIM runs perfectly fine on VMs and at least one other physical model. Any ideas would be helpful as I'm at a complete loss on this one. smsts.log <![LOG[Executing C:\_SMSTaskSequence\OSD\DEV00018\ccmsetup.exe /useronly /source:C:\_SMSTaskSequence\OSD\DEV00018 /config:MobileClient.TCF /status:632]LOG]!><time="12:02:57.228+480" date="01-09-2015" component="OSDSetupHook" context="" type="0" thread="2396" file="installclient.cpp:1084"> <![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="12:02:57.228+480" date="01-09-2015" component="OSDSetupHook" context="" type="0" thread="2396" file="commandline.cpp:228"> <![LOG[Set command line: "C:\_SMSTaskSequence\OSD\DEV00018\ccmsetup.exe" /useronly /source:C:\_SMSTaskSequence\OSD\DEV00018 /config:MobileClient.TCF /status:632]LOG]!><time="12:02:57.228+480" date="01-09-2015" component="OSDSetupHook" context="" type="0" thread="2396" file="commandline.cpp:731"> <![LOG[Executing command line: "C:\_SMSTaskSequence\OSD\DEV00018\ccmsetup.exe" /useronly /source:C:\_SMSTaskSequence\OSD\DEV00018 /config:MobileClient.TCF /status:632]LOG]!><time="12:02:57.228+480" date="01-09-2015" component="OSDSetupHook" context="" type="1" thread="2396" file="commandline.cpp:827"> <![LOG[Launching command shell.]LOG]!><time="12:02:59.115+480" date="01-09-2015" component="OSDSetupHook" context="" type="1" thread="2484" file="debugwindow.cpp:202"> <![LOG[Windows station: WinSta0]LOG]!><time="12:02:59.115+480" date="01-09-2015" component="OSDSetupHook" context="" type="1" thread="2484" file="utils.cpp:43"> <![LOG[Desktop: Default]LOG]!><time="12:02:59.115+480" date="01-09-2015" component="OSDSetupHook" context="" type="1" thread="2484" file="utils.cpp:62"> <![LOG[executing command: C:\WINDOWS\system32\cmd.exe /k]LOG]!><time="12:02:59.115+480" date="01-09-2015" component="OSDSetupHook" context="" type="1" thread="2484" file="debugwindow.cpp:63"> <![LOG[executed command: C:\WINDOWS\system32\cmd.exe /k]LOG]!><time="12:02:59.115+480" date="01-09-2015" component="OSDSetupHook" context="" type="1" thread="2484" file="debugwindow.cpp:80"> <![LOG[Process completed with exit code 1]LOG]!><time="12:03:03.813+480" date="01-09-2015" component="OSDSetupHook" context="" type="1" thread="2396" file="commandline.cpp:1123"> <![LOG[FALSE, HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\osdgina\installclient.cpp,1151)]LOG]!><time="12:03:03.813+480" date="01-09-2015" component="OSDSetupHook" context="" type="0" thread="2396" file="installclient.cpp:1151"> <![LOG[Client installation failed, code 1]LOG]!><time="12:03:03.813+480" date="01-09-2015" component="OSDSetupHook" context="" type="3" thread="2396" file="installclient.cpp:1151"> <![LOG[ Setting URL = http://#Server#.#Server#.com, Ports = 80,443, CRL = false]LOG]!><time="12:03:03.813+480" date="01-09-2015" component="OSDSetupHook" context="" type="0" thread="2396" file="utils.cpp:6143"> <![LOG[ Setting Server Certificates.]LOG]!><time="12:03:03.813+480" date="01-09-2015" component="OSDSetupHook" context="" type="0" thread="2396" file="utils.cpp:6171"> <![LOG[ Setting Authenticator.]LOG]!><time="12:03:03.813+480" date="01-09-2015" component="OSDSetupHook" context="" type="0" thread="2396" file="utils.cpp:6178"> <![LOG[Set authenticator in transport]LOG]!><time="12:03:03.813+480" date="01-09-2015" component="OSDSetupHook" context="" type="0" thread="2396" file="libsmsmessaging.cpp:7734"> <![LOG[ Setting Media Certificate.]LOG]!><time="12:03:03.813+480" date="01-09-2015" component="OSDSetupHook" context="" type="0" thread="2396" file="utils.cpp:6195"> <![LOG[pszUnicodeString != 0, HRESULT=80070057 (e:\nts_sccm_release\sms\framework\core\ccmcore\string.cpp,301)]LOG]!><time="12:03:04.234+480" date="01-09-2015" component="OSDSetupHook" context="" type="0" thread="2396" file="string.cpp:301"> <![LOG[Non fatal error 0x80070057 in sending task sequence execution status message to MP]LOG]!><time="12:03:04.234+480" date="01-09-2015" component="OSDSetupHook" context="" type="2" thread="2396" file="utils.cpp:6390"> <![LOG[ Setting URL = http://#Server#.#Server#.com, Ports = 80,443, CRL = false]LOG]!><time="12:03:04.234+480" date="01-09-2015" component="OSDSetupHook" context="" type="0" thread="2396" file="utils.cpp:6143"> <![LOG[ Setting Server Certificates.]LOG]!><time="12:03:04.234+480" date="01-09-2015" component="OSDSetupHook" context="" type="0" thread="2396" file="utils.cpp:6171"> <![LOG[ Setting Authenticator.]LOG]!><time="12:03:04.234+480" date="01-09-2015" component="OSDSetupHook" context="" type="0" thread="2396" file="utils.cpp:6178"> <![LOG[Set authenticator in transport]LOG]!><time="12:03:04.234+480" date="01-09-2015" component="OSDSetupHook" context="" type="0" thread="2396" file="libsmsmessaging.cpp:7734"> <![LOG[ Setting Media Certificate.]LOG]!><time="12:03:04.234+480" date="01-09-2015" component="OSDSetupHook" context="" type="0" thread="2396" file="utils.cpp:6195"> <![LOG[pszUnicodeString != 0, HRESULT=80070057 (e:\nts_sccm_release\sms\framework\core\ccmcore\string.cpp,301)]LOG]!><time="12:03:04.250+480" date="01-09-2015" component="OSDSetupHook" context="" type="0" thread="2396" file="string.cpp:301"> <![LOG[Non fatal error 0x80070057 in sending task sequence execution status message to MP]LOG]!><time="12:03:04.250+480" date="01-09-2015" component="OSDSetupHook" context="" type="2" thread="2396" file="utils.cpp:6390"> <![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="12:03:05.264+480" date="01-09-2015" component="OSDSetupHook" context="" type="0" thread="2396" file="commandline.cpp:228"> <![LOG[Set command line: "C:\WINDOWS\system32\_SMSOSDSetup\TsProgressUI.exe" /Unregister]LOG]!><time="12:03:05.264+480" date="01-09-2015" component="OSDSetupHook" context="" type="0" thread="2396" file="commandline.cpp:731"> <![LOG[Executing command line: "C:\WINDOWS\system32\_SMSOSDSetup\TsProgressUI.exe" /Unregister]LOG]!><time="12:03:05.264+480" date="01-09-2015" component="OSDSetupHook" context="" type="1" thread="2396" file="commandline.cpp:827"> <![LOG[==========[ TsProgressUI started in process 2776 ]==========]LOG]!><time="12:03:05.264+480" date="01-09-2015" component="TsProgressUI" context="" type="1" thread="2780" file="winmain.cpp:330"> <![LOG[Command line: "C:\WINDOWS\system32\_SMSOSDSetup\TsProgressUI.exe" /Unregister]LOG]!><time="12:03:05.264+480" date="01-09-2015" component="TsProgressUI" context="" type="0" thread="2780" file="winmain.cpp:332"> <![LOG[Unregistering COM classes]LOG]!><time="12:03:05.264+480" date="01-09-2015" component="TsProgressUI" context="" type="1" thread="2780" file="winmain.cpp:204"> <![LOG[Unregistering class objects]LOG]!><time="12:03:05.264+480" date="01-09-2015" component="TsProgressUI" context="" type="1" thread="2780" file="winmain.cpp:495"> <![LOG[Shutdown complete.]LOG]!><time="12:03:05.264+480" date="01-09-2015" component="TsProgressUI" context="" type="1" thread="2780" file="winmain.cpp:512"> <![LOG[Process completed with exit code 0]LOG]!><time="12:03:05.264+480" date="01-09-2015" component="OSDSetupHook" context="" type="1" thread="2396" file="commandline.cpp:1123"> <![LOG[Successfully unregistered TS Progress UI.]LOG]!><time="12:03:05.264+480" date="01-09-2015" component="OSDSetupHook" context="" type="1" thread="2396" file="utils.cpp:2903"> <![LOG[InstallSMSClient(loadDir, dwResult), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\osdgina\basesetuphook.cpp,1506)]LOG]!><time="12:03:05.264+480" date="01-09-2015" component="OSDSetupHook" context="" type="0" thread="2396" file="basesetuphook.cpp:1506"> <![LOG[Failed to install SMS Client (0x80004005)]LOG]!><time="12:03:05.264+480" date="01-09-2015" component="OSDSetupHook" context="" type="3" thread="2396" file="basesetuphook.cpp:1506"> <![LOG[Waiting for command shell to complete.]LOG]!><time="12:03:05.264+480" date="01-09-2015" component="OSDSetupHook" context="" type="1" thread="2484" file="debugwindow.cpp:218">

OK, so here's my scenario. I've created two Applications each of which have more than 1 Application Type. When I created and tested them both with a deployment to a collection and during OSD with PXE they work fine. What is "special" I think about them though is that I have made the dependencies for the Application Types are in the same Application. When I try to run the Task Sequence on a Stand-Alone USB drive is NOT connected to the network these two Applications do not install. If I run the same Task Sequence on the same Stand-Alone USB drive the TS fails. So in case I'm not clear on how the Application\Deployment Type is set up let me try and diagram it Application 1 -Deployment Type 1 - Patch .0.5 -Deployment Type 2 - Patch .1 -Deployment Type 3 - MSI v1 The application is called Patch .05 is called and has a dependency of Patch .1 Patch .1 has a dependency of the MSI The MSI is installed, then Patch .1 is installed, then Patch .05 is installed resulting in a fully patched version of the original MSI v1.1.5 Application 2 is pretty much the same logic as Application 1, just with only 2 Deployment Types. My question is, why will these run correctly when the client machine is connected to the network, but when run on a Stand-Alone USB and not connected they fail? I have other applications that call other applications in the same TS and those work fine, so it seems that SCCM doesn't like the dependency being in the SAME application. If I have to I will break them out into separate applications, but that seem pretty silly! I can provide SMSTS and AppEnforcement logs or whatever logs I can get from the client if needed.

I'm getting the same error. Deploying Win7x86 with SCCM 2012 SP1 CU2. After I install one of the applications required for my laptop model it reboots and then bombs out. I get the exact same errors at the end of the SMSTS log as you provided. Were you able to find a solution\cause? I've been reading around and apparently 0x8007045b can be caused by a bad sector on the drive. Just seams odd that the TS would be hitting the exact same spot in the drive every time. Thanks for any input!

From what I understand the installation requires that an absolute path be used to call the setup.iss file. I've found this to be somewhat tricky since SCCM never has an absolute path when deploying software. If you haven't tried it already just drop the "C:\Windows\" part and call the setup.iss file that way in your program. If that doesn't work you would need to use a batch file in your program and copy the file to a local temp location, run the command using that location, then deleting this file. Now doing it this way is kind of messy because you are copying the package locally, then recopying the specific file to a known location to call it in your program. I've had success doing silent installs that require a call to an absolute path, or when just copying a file such as a shortcut to a desktop. Here is a sample of what you might want your batch file to look like: ------------ @echo off SETLOCAL Set THISDIR = %~dp0 xcopy "%thisdir%setup.iss" "C:\Temp" /c /y avsetup.exe -a -s -f1 C:\Temp\setup.iss del /S/Q/F C:\Temp\setup.iss ------------------

Hmm haven't heard of driver packages being empty like that though. I do know that HP drivers need to be "unwrapped". HP distributes them in EXE's but if you use a compression tool like WinRAR you can extract the actual drivers and use those in SCCM. Not sure if this is much help though to you though. Good luck.

Ok, I think I figured out a workaround that I can use. I commented out all the sections of the MigApp.xml & MigUser.xml that I wasn't going to use anyway and ran it again. No errors came up and it did successfully create the config.xml file. I believe it should be alright since I was going to just exclude a bunch of things anyway but I was hoping to keep the stock xml files as vanilla as possible.

I'm just leery of modifying these files and figured it must be something I am doing wrong.

Yes, I should have been more specific, that is the updated MigApp.xml file that supports Office 2010. I believe I was running into this same problem when I was trying to create a config.xml file with the original migapp.xml file. I have loaded it into both XML Notepad and MS Visual Studio 2010 Express there are a few syntax error that appear even after I apply the schema but none of them are the line referenced in the error log. I've attached the error log and copied it below. This is my first post so not sure which is the preferred method. -------- 2011-06-22 14:02:09, Info [0x000000] USMT Started at 2011/06/22:14:02:09.312 2011-06-22 14:02:09, Info [0x000000] Command line: scanstate /i:migapp.xml /i:miguser.xml /genconfig:config.xml /v:13 2011-06-22 14:02:09, Status [0x000000] Activity: 'MIGACTIVITY_COMMAND_LINE_PROCESSING' 2011-06-22 14:02:09, Info [0x000000] Script file specified: C:\USMT4\x86\migapp.xml[gle=0x00000002] 2011-06-22 14:02:09, Info [0x000000] Script file specified: C:\USMT4\x86\miguser.xml[gle=0x00000002] 2011-06-22 14:02:09, Info [0x000000] Downlevel Manifests path is C:\USMT4\x86\dlmanifests 2011-06-22 14:02:09, Info [0x000000] Starting the migration process[gle=0x000000cb] 2011-06-22 14:02:09, Status [0x000000] Activity: 'MIGACTIVITY_MIGRATION_START' 2011-06-22 14:02:09, Info [0x000000] Excluding path: C:\USMT4\x86 2011-06-22 14:02:09, Info [0x000000] Excluding path: C:\USMT4\x86\ScanState.log 2011-06-22 14:02:09, Info [0x000000] Excluding path: C:\USMT4\x86\config.xml 2011-06-22 14:02:09, Info [0x000000] Excluding path: C:\USMT4\x86\migapp.xml 2011-06-22 14:02:09, Info [0x000000] Excluding path: C:\USMT4\x86\miguser.xml 2011-06-22 14:02:09, Info [0x000000] Excluding path: %SystemDrive%\Boot 2011-06-22 14:02:09, Info [0x000000] Excluding path: C:\Boot 2011-06-22 14:02:09, Info [0x000000] Excluding path: %SystemDrive%\Build 2011-06-22 14:02:09, Info [0x000000] Excluding path: C:\Build 2011-06-22 14:02:09, Info [0x000000] Excluding path: %SystemDrive%\InstalledRepository 2011-06-22 14:02:09, Info [0x000000] Excluding path: C:\InstalledRepository 2011-06-22 14:02:09, Info [0x000000] Excluding path: %SystemDrive%\$RECYCLE.BIN 2011-06-22 14:02:09, Info [0x000000] Excluding path: C:\$RECYCLE.BIN 2011-06-22 14:02:09, Info [0x000000] Excluding path: %SystemDrive%\RECYCLER 2011-06-22 14:02:09, Info [0x000000] Excluding path: C:\RECYCLER 2011-06-22 14:02:09, Info [0x000000] Excluding path: %SystemDrive%\Recycled 2011-06-22 14:02:09, Info [0x000000] Excluding path: C:\Recycled 2011-06-22 14:02:09, Info [0x000000] Excluding path: %SystemDrive%\System Volume Information 2011-06-22 14:02:09, Info [0x000000] Excluding path: C:\System Volume Information 2011-06-22 14:02:09, Info [0x000000] Excluding path: %SystemDrive%\$UPGRADE.~OS 2011-06-22 14:02:09, Info [0x000000] Excluding path: C:\$UPGRADE.~OS 2011-06-22 14:02:09, Info [0x000000] Entering MigStartupOnline method 2011-06-22 14:02:09, Info [0x0803ac] Initializing online WinNT platform (Read/Write) 2011-06-22 14:02:09, Info [0x080000] Platform is using admin privileges 2011-06-22 14:02:09, Info [0x0803df] Adding direct mapping from HKLM to HKEY_LOCAL_MACHINE (R/W) 2011-06-22 14:02:09, Info [0x0803e1] Successfully mapped HKLM 2011-06-22 14:02:09, Info [0x0803df] Adding direct mapping from HKU to HKEY_USERS (R/W) 2011-06-22 14:02:09, Info [0x0803e1] Successfully mapped HKU 2011-06-22 14:02:09, Info [0x08087c] SMI engine is not available on this system 2011-06-22 14:02:09, Warning [0x08040c] Failed to create SMI engine 2011-06-22 14:02:09, Info [0x08040e] State data store is NOT available. 2011-06-22 14:02:09, Info [0x0803b4] COnlineWinNTPlatform: ComputerName=897-ALBILLTEST 2011-06-22 14:02:09, Info [0x0803b5] COnlineWinNTPlatform: Get Machine Sid S-1-5-21-3983400743-734527811-1596686406 2011-06-22 14:02:09, Info [0x080000] COnlineWinNTPlatform::GetMachineGuid - return value -> {0c7093bb-99e4-4c3f-b866-36e556612335} 2011-06-22 14:02:09, Info [0x0803b8] Processing profile: C:\WINDOWS\system32\config\systemprofile 2011-06-22 14:02:09, Info [0x0803bf] User profile HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-18 excluded because SID S-1-5-18 is excluded by default. 2011-06-22 14:02:09, Info [0x0803b8] Processing profile: C:\Documents and Settings\LocalService 2011-06-22 14:02:09, Info [0x0803bf] User profile HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-19 excluded because SID S-1-5-19 is excluded by default. 2011-06-22 14:02:09, Info [0x0803b8] Processing profile: C:\Documents and Settings\NetworkService 2011-06-22 14:02:09, Info [0x0803bf] User profile HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-20 excluded because SID S-1-5-20 is excluded by default. 2011-06-22 14:02:09, Info [0x0803b8] Processing profile: C:\Documents and Settings\Administrator 2011-06-22 14:02:09, Info [0x080000] Skipping temporary user profile HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-21-3983400743-734527811-1596686406-500 2011-06-22 14:02:09, Info [0x0803b8] Processing profile: C:\WINDOWS\system32\config\systemprofile 2011-06-22 14:02:09, Info [0x0803bf] User profile HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-18 excluded because SID S-1-5-18 is excluded by default. 2011-06-22 14:02:09, Info [0x0803b8] Processing profile: C:\Documents and Settings\LocalService 2011-06-22 14:02:09, Info [0x0803bf] User profile HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-19 excluded because SID S-1-5-19 is excluded by default. 2011-06-22 14:02:09, Info [0x0803b8] Processing profile: C:\Documents and Settings\NetworkService 2011-06-22 14:02:09, Info [0x0803bf] User profile HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-20 excluded because SID S-1-5-20 is excluded by default. 2011-06-22 14:02:09, Info [0x0803b8] Processing profile: C:\Documents and Settings\Administrator 2011-06-22 14:02:09, Info [0x0803df] Adding direct mapping from HKCU to HKEY_USERS\S-1-5-21-3983400743-734527811-1596686406-500 (R/W) 2011-06-22 14:02:09, Info [0x0803e1] Successfully mapped HKCU 2011-06-22 14:02:09, Info [0x0803df] Adding direct mapping from HKCU\Software\Classes to HKEY_USERS\S-1-5-21-3983400743-734527811-1596686406-500_Classes (R/W) 2011-06-22 14:02:09, Info [0x0803e1] Successfully mapped HKCU\Software\Classes 2011-06-22 14:02:09, Info [0x0803e6] Removing mapping for HKCU\Software\Classes 2011-06-22 14:02:09, Info [0x0803e7] Successfully unmapped HKCU\Software\Classes 2011-06-22 14:02:09, Info [0x0803e6] Removing mapping for HKCU 2011-06-22 14:02:09, Info [0x0803e7] Successfully unmapped HKCU 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_COMMON_DESKTOPDIRECTORY: C:\Documents and Settings\All Users\Desktop, default location: No 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_COMMON_DOCUMENTS: C:\Documents and Settings\All Users\Documents, default location: No 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_COMMON_PROGRAMS: C:\Documents and Settings\All Users\Start Menu\Programs, default location: No 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_COMMON_STARTMENU: C:\Documents and Settings\All Users\Start Menu, default location: No 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_COMMON_STARTUP: C:\Documents and Settings\All Users\Start Menu\Programs\Startup, default location: No 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_COMMON_TEMPLATES: C:\Documents and Settings\All Users\Templates, default location: No 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_COMMON_MUSIC: C:\Documents and Settings\All Users\Documents\My Music, default location: No 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_COMMON_PICTURES: C:\Documents and Settings\All Users\Documents\My Pictures, default location: No 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_COMMON_VIDEO: C:\Documents and Settings\All Users\Documents\My Videos, default location: No 2011-06-22 14:02:09, Info [0x0803ae] Dumping detected users: 2011-06-22 14:02:09, Info [0x0803af] Name: Guest, Domain: 897-ALBILLTEST, Profile: (NULL), SidString: S-1-5-21-3983400743-734527811-1596686406-501, ID: USER00000002, IsAdmin: 0, IsBuiltInAdmin: 0, IsDisabled: 1, IsInteractive: 1, Groups: Guests 2011-06-22 14:02:09, Info [0x0803af] Name: ASPNET, Domain: 897-ALBILLTEST, Profile: (NULL), SidString: S-1-5-21-3983400743-734527811-1596686406-1004, ID: USER00000001, IsAdmin: 0, IsBuiltInAdmin: 0, IsDisabled: 0, IsInteractive: 1, Groups: Users 2011-06-22 14:02:09, Info [0x0803af] Name: Administrator, Domain: 897-ALBILLTEST, Profile: %SystemDrive%\Documents and Settings\Administrator, SidString: S-1-5-21-3983400743-734527811-1596686406-500, ID: USER00000000, IsAdmin: 1, IsBuiltInAdmin: 1, IsDisabled: 0, IsInteractive: 1, Groups: Administrators 2011-06-22 14:02:09, Info [0x080000] Known folder FOLDERID_Downloads: C:\Documents and Settings\Administrator\Downloads, default location: Yes 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_INTERNET_CACHE: C:\Documents and Settings\Administrator\Local Settings\Temporary Internet Files, default location: Yes 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_COOKIES: C:\Documents and Settings\Administrator\Cookies, default location: Yes 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_DESKTOP: C:\Documents and Settings\Administrator\Desktop, default location: Yes 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_DESKTOPDIRECTORY: C:\Documents and Settings\Administrator\Desktop, default location: Yes 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_FAVORITES: C:\Documents and Settings\Administrator\Favorites, default location: Yes 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_HISTORY: C:\Documents and Settings\Administrator\Local Settings\History, default location: Yes 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_MYPICTURES: C:\Documents and Settings\Administrator\My Documents\My Pictures, default location: Yes 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_MYMUSIC: C:\Documents and Settings\Administrator\My Documents\My Music, default location: Yes 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_MYVIDEO: C:\Documents and Settings\Administrator\My Documents\My Videos, default location: Yes 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_PERSONAL: C:\Documents and Settings\Administrator\My Documents, default location: Yes 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_MYDOCUMENTS: C:\Documents and Settings\Administrator\My Documents, default location: Yes 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_PROGRAMS: C:\Documents and Settings\Administrator\Start Menu\Programs, default location: Yes 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_RECENT: C:\Documents and Settings\Administrator\Recent, default location: Yes 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_SENDTO: C:\Documents and Settings\Administrator\SendTo, default location: Yes 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_STARTMENU: C:\Documents and Settings\Administrator\Start Menu, default location: Yes 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_STARTUP: C:\Documents and Settings\Administrator\Start Menu\Programs\Startup, default location: Yes 2011-06-22 14:02:09, Info [0x080000] Known folder CSIDL_TEMPLATES: C:\Documents and Settings\Administrator\Templates, default location: Yes 2011-06-22 14:02:09, Info [0x0803af] Name: User_Account, Domain: 897-ALBILLTEST, Profile: (NULL), SidString: S-1-5-21-3983400743-734527811-1596686406-1005, ID: USER00000005, IsAdmin: 1, IsBuiltInAdmin: 0, IsDisabled: 0, IsInteractive: 1, Groups: Administrators;Users 2011-06-22 14:02:09, Info [0x0803af] Name: SUPPORT_388945a0, Domain: 897-ALBILLTEST, Profile: (NULL), SidString: S-1-5-21-3983400743-734527811-1596686406-1002, ID: USER00000004, IsAdmin: 0, IsBuiltInAdmin: 0, IsDisabled: 1, IsInteractive: 0, Groups: HelpServicesGroup 2011-06-22 14:02:09, Info [0x0803af] Name: HelpAssistant, Domain: 897-ALBILLTEST, Profile: (NULL), SidString: S-1-5-21-3983400743-734527811-1596686406-1006, ID: USER00000003, IsAdmin: 0, IsBuiltInAdmin: 0, IsDisabled: 1, IsInteractive: 0, Groups: 2011-06-22 14:02:09, Info [0x0805a8] Added drive root mapping for 'C:\' (type: 1, file system: 1, bus type: 3, hotplug media: No, hotplug device: No) 2011-06-22 14:02:09, Info [0x0805a8] Added drive root mapping for 'D:\' (type: 2, file system: 0, bus type: 0, hotplug media: No, hotplug device: No) 2011-06-22 14:02:09, Info [0x0803e5] Not unmapping HKCU\Software\Classes; it is not mapped 2011-06-22 14:02:09, Info [0x0803e5] Not unmapping HKCU; it is not mapped 2011-06-22 14:02:09, Info [0x080485] Initializing OS analysis service (data path = C:\USMT4\x86) 2011-06-22 14:02:09, Info [0x080481] Retrieving patterns from C:\USMT4\x86\SFPAT.INF (section prefix: System) 2011-06-22 14:02:09, Info [0x080482] Done retrieving patterns from C:\USMT4\x86\SFPAT.INF 2011-06-22 14:02:09, Info [0x080481] Retrieving patterns from C:\USMT4\x86\SFPATXP.INF (section prefix: System) 2011-06-22 14:02:09, Info [0x080482] Done retrieving patterns from C:\USMT4\x86\SFPATXP.INF 2011-06-22 14:02:09, Info [0x080481] Retrieving patterns from C:\USMT4\x86\SFPAT.INF (section prefix: User) 2011-06-22 14:02:09, Info [0x080482] Done retrieving patterns from C:\USMT4\x86\SFPAT.INF 2011-06-22 14:02:09, Info [0x080481] Retrieving patterns from C:\USMT4\x86\SFPATXP.INF (section prefix: User) 2011-06-22 14:02:09, Info [0x080482] Done retrieving patterns from C:\USMT4\x86\SFPATXP.INF 2011-06-22 14:02:09, Info [0x080466] Creating list-based system object filter 2011-06-22 14:02:09, Info [0x080469] Opening file list from file: C:\USMT4\x86\SFLISTXP.DAT 2011-06-22 14:02:09, Warning [0x080462] CListSysFileFilter::BuildTree: could not create FileList object for C:\USMT4\x86\SFLISTXP.DAT: Win32Exception: \\?\C:\USMT4\x86\SFLISTXP.DAT: The system cannot find the file specified. [0x00000002] __thiscall UnBCL::FileStream::FileStream(const class UnBCL::String *,enum UnBCL::FileMode,enum UnBCL::FileAccess,enum UnBCL::FileShare,unsigned long) 2011-06-22 14:02:09, Info [0x080486] Initialized OS analysis service 2011-06-22 14:02:09, Info [0x080489] Setting system object filter context (System) 2011-06-22 14:02:09, Info [0x000000] Startup exclusions - Adding excluded file pattern: C:\USMT4\x86\* [*] 2011-06-22 14:02:09, Info [0x000000] Startup exclusions - Adding excluded file pattern: C:\USMT4\x86 [scanState.log] 2011-06-22 14:02:09, Info [0x000000] Startup exclusions - Adding excluded file pattern: C:\USMT4\x86 [config.xml] 2011-06-22 14:02:09, Info [0x000000] Startup exclusions - Adding excluded file pattern: C:\USMT4\x86 [migapp.xml] 2011-06-22 14:02:09, Info [0x000000] Startup exclusions - Adding excluded file pattern: C:\USMT4\x86 [miguser.xml] 2011-06-22 14:02:09, Info [0x000000] Startup exclusions - Adding excluded file pattern: %SystemDrive%\Boot\* [*] transformed to: C:\Boot\* [*] 2011-06-22 14:02:09, Info [0x000000] Startup exclusions - Adding excluded file pattern: C:\Boot\* [*] 2011-06-22 14:02:09, Info [0x000000] Startup exclusions - Adding excluded file pattern: %SystemDrive%\Build\* [*] transformed to: C:\Build\* [*] 2011-06-22 14:02:09, Info [0x000000] Startup exclusions - Adding excluded file pattern: C:\Build\* [*] 2011-06-22 14:02:09, Info [0x000000] Startup exclusions - Adding excluded file pattern: %SystemDrive%\InstalledRepository\* [*] transformed to: C:\InstalledRepository\* [*] 2011-06-22 14:02:09, Info [0x000000] Startup exclusions - Adding excluded file pattern: C:\InstalledRepository\* [*] 2011-06-22 14:02:09, Info [0x000000] Startup exclusions - Adding excluded file pattern: %SystemDrive%\^$RECYCLE.BIN\* [*] transformed to: C:\^$RECYCLE.BIN\* [*] 2011-06-22 14:02:09, Info [0x000000] Startup exclusions - Adding excluded file pattern: C:\^$RECYCLE.BIN\* [*] 2011-06-22 14:02:09, Info [0x000000] Startup exclusions - Adding excluded file pattern: %SystemDrive%\RECYCLER\* [*] transformed to: C:\RECYCLER\* [*] 2011-06-22 14:02:09, Info [0x000000] Startup exclusions - Adding excluded file pattern: C:\RECYCLER\* [*] 2011-06-22 14:02:09, Info [0x000000] Startup exclusions - Adding excluded file pattern: %SystemDrive%\Recycled\* [*] transformed to: C:\Recycled\* [*] 2011-06-22 14:02:09, Info [0x000000] Startup exclusions - Adding excluded file pattern: C:\Recycled\* [*] 2011-06-22 14:02:09, Info [0x000000] Startup exclusions - Adding excluded file pattern: %SystemDrive%\System Volume Information\* [*] transformed to: C:\System Volume Information\* [*] 2011-06-22 14:02:09, Info [0x000000] Startup exclusions - Adding excluded file pattern: C:\System Volume Information\* [*] 2011-06-22 14:02:09, Info [0x000000] Startup exclusions - Adding excluded file pattern: %SystemDrive%\^$UPGRADE.~OS\* [*] transformed to: C:\^$UPGRADE.~OS\* [*] 2011-06-22 14:02:09, Info [0x000000] Startup exclusions - Adding excluded file pattern: C:\^$UPGRADE.~OS\* [*] 2011-06-22 14:02:09, Info [0x000000] Startup exclusions - Adding excluded file pattern: C:\Documents and Settings\Administrator\Local Settings\Temp\tmp1EE.tmp\* [*] 2011-06-22 14:02:09, Info [0x080172] AgentManager: not loading agent CMockAgent in mockagent.dll due to configuration settings 2011-06-22 14:02:09, Error [0x08055b] MXE Agent: XML parse error while loading script C:\USMT4\x86\migapp.xml. Message: hResult = 0x0, Line = 7349, Position = 3; Only one top level element is allowed in an XML document. . 2011-06-22 14:02:09, Error [0x000000] EngineStartup caught exception: XmlException: hResult = 0x0, Line = 7349, Position = 3; Only one top level element is allowed in an XML document. . void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *) 2011-06-22 14:02:09, Info [0x0803e6] Removing mapping for HKLM 2011-06-22 14:02:09, Info [0x0803e7] Successfully unmapped HKLM 2011-06-22 14:02:09, Info [0x0803e6] Removing mapping for HKU 2011-06-22 14:02:09, Info [0x0803e7] Successfully unmapped HKU 2011-06-22 14:02:09, Info [0x080487] Destroying OS analysis service 2011-06-22 14:02:09, Info [0x080488] Destroyed OS analysis service 2011-06-22 14:02:09, Info [0x000000] Leaving MigStartupOnline method 2011-06-22 14:02:09, Error [0x000000] Error while trying to start the migration process[gle=0x00000012] 2011-06-22 14:02:09, Info [0x000000] Failed.[gle=0x00000002] 2011-06-22 14:02:09, Info [0x000000] Migration failed because of an XML error; look in the log for specific details[gle=0x00000002] 2011-06-22 14:02:09, Info [0x000000] USMT Completed at 2011/06/22:14:02:09.891[gle=0x00000002] 2011-06-22 14:02:09, Info [0x000000] Entering MigShutdown method 2011-06-22 14:02:09, Info [0x000000] Leaving MigShutdown method --------scanstate.log