Skip to content

How do I ?

Reporting, Software Updates, Asset Management, App-v

Subforums

  1. if you can create queries then you can have dynamic collections

    • 585 posts
  2. DCM, allows you to set baselines throughout your organisation to identify prohibited software or out of compliance software

    • 45 posts
  3. Creating, editing and viewing reports within SCCM

    • 978 posts
  1. hi all, We are deploying our yearly OS refresh to our network via sccm (2012r2). We have decided to deploy applications in the TS rather than in the Image it's self. For some reason applications seem to be hit and miss deploying. in a room full of 30 identical computers, about 6 got applications. the rest just had the Image. Re running the TS had the same result but on different computers. Tried: Allowing anonymous authentication Removing apps one by one (but could not get a consistent deploy) Restarts in between each application Checked boundary's to make sure we have no rogues. (we only have one) We are pulling our hair out, can anyone help please M…

  2. Started by SR82901,

    SCCM 2012 SP1 Attempting some OSD tasks and knocking my head against the wall with this TFTP error. My SMSPXE.log does not update at all during the actual PXE boot process with the machine. Which makes me thing some link in the chain is broken and it's not hitting my SCCM box at all with this. I have made the recommended changes to my DHCP server, but have NOT made the IP helpers change as I am not a CISCO guy. I have made the change on 66 with the IP address of my SCCM server (which I thought was supposed to take care of the TFTP duties). I have also pointed option 67 to : \\***-wsccm\REMINST\SMSBoot\x64\wdsnbp.com. Now there is one odd option selected # 150 that points…

  3. Started by beck4164,

    Hello All, we are currently in the process of deploying SCCM 2007 R2 in our environment. However we our running into a problem were we are unable to access the computer using remote tools or deploy the SCCM client to the computer. It works fine when we disable the firewall but when we turn it back on it blocks anything coming from SCCM. Below is the exceptions i have added to the clients firewalls but still it wont work with the exceptions. Any ideas? 67:TCP:10.1.121.150:enabled:SMSPXEDHCP 68:TCP:10.1.121.150:enabled:SMSPXEDHCP 69:TCP:10.1.121.150:enabled:SMSPXETFTP 4011:TCP:10.1.121.150:enabled:SMSPXEBINL 445:TCP:10.1.121.150:enabled:SMSSMB 80:TCP:10.1.121.150:e…

  4. I was looking for a folder that have large size in my c drive .soddenly I've found ccmchache folder with 5GB .I change the cache size on clients nicely to 500 MB. but after a week that sccm wanted to install update on clients I faced with too many updates about 50 Updates that should be installed .I let them install .after restarting windows I saw some of the Update hasn't be installed . on the other hand some of updates that I had defined to be required to install and I expect them install automatically But some of them become an available update and waiting for user approve to install . whats the solution .?please .

    • 0 replies
    • 4.6k views
  5. Started by Malik4u,

    Hi All, we have a setup of System Center Configuration Manager 2012 R2 and now we want to deploy OS from another System Center Configuration Manager server located on a diffirent city. Would appreciate if someone provide what we should need in terms of hardware / infrastructure ... member server ETC. Thanks in advance.

  6. 2 months ago I had one distribution point. \\server\share$ .. Now I got 2.. the second one being in the cloud. 24 hours ago I PXE'ed a computer and deployed OS with no issues. Today all my task sequences fail, they all same they cannot reach packages at the distribution point. It seems to be all the packages, I tried removing the one it complained about 'DK100001' which is USMT.. And instead it just started complaining about 'DK100003' which is the configuration Client No configurations has changed in here the past 24 hours. What has happened today though. Is that our server guy added a new Active Directory Server in the cloud. Could this in anyway be related? how …

  7. Hello. I have a SCCM on my domain (university) which we use to software distribution, and OSD, among others. I am in the process of implementing UE-V end app-v in it. We separate our various services (faculty and staff, computer classrooms) in various VLANs. Our sccm server (w2012R2) which is virtualized, has network teaming and supposedly good performance/bandwith, both for network and storage. We just have a primary site with fallback DP in it, and also MP and FP, and two DPs over WAN (100MB/s). We have about 5k machines in all; Probably half of them are for classrooms. The primary site has 2 NIC, one for general access, and the seco…

  8. Can we create an All MAC Workstations Collection?

  9. Hello SCCM experts, We are trying to distribute the package to all our DPs but ended up with the below error: package <Package ID> does not have a preferred sender. Coud anyone quickly throw some lights to resolve this issue, this is very very urgent. Please find the attachment for distmgr.log your quick help is highly appreciated...Thanks in advance.

  10. Hello, I am facing the following issue: We have 4 Primary sites and one Central CAS Server. We lost the The CAS site by a HD failure. We only have a recent backup of the Site CAS Database only no backup for any configuration for the site. We Prepared a new server did a Fresh installation of Windows 2008 R2 Sp1 install all Prerequisite for System Center Configuration Manager 2012 Sp1 and Run the Setup for Sysem Center Configuration Manager. I choose reinstall 1- Recover A Site 2- Reinstall this site Server (CAS Server) 3- Use a site Database that has been manually recovered. (I restored the last backup of the database) Follow the Wizard, and the in…

    • 0 replies
    • 7.3k views
  11. Started by Malik4u,

    Hello Anyweb, You mentioned about this book, seems to be interesting. Could you please tell me if this covers the SCCM environment design? Like planning infra etc? Also if this book will cover the site-to-site /head office and branch link scenario? Thanks in advance.

    • 4 replies
    • 4.3k views
  12. Started by Malik4u,

    Hi All, we have a setup of System Center Configuration Manager 2012 R2 and now we want to deploy OS from another System Center Configuration Manager server located on a diffirent city. Would appreciate if someone provide what we should need in terms of hardware / infrastructure ... member server ETC. Thanks in advance.

  13. Hi, I would like to know the best way in regards to licenses how to build from scratch SCCM 2012 environment. Is it better to use 180-trial day version, and then buy the real product key or enter MSDN license and then after test phase enter real key (when our company buys it, currently we don't have it) WITHOUT REINSTALL THE WHOLE THING? In my telephone conversation with Microsoft Customer Support I was informed that using MSDN license and after that using real license key could be an issue. Any examples from the field guys? Thanks,

  14. Started by mark1138,

    Hi I wonder if any of you have seen this problem. I have an issue with part of my task sequence when deploying from Stand Alone Media. I have a package that creates a folder here: "%SYSTEMROOT%\system32\oobe\info\backgrounds" copies some jpg files there and also puts a registry entry in using regedit.exe /s command via a .cmd file. If I run the Task Sequence via PXE boot these commands complete with no issue. When I use the stand-alone media the registry entry is applied but the backgrounds are not copied. The reason I need to use Stand alone media is because we are building OptiPlex GX520 desktops and they do not PXE boot with our MDT Task Sequence. Any ide…

  15. Hello All, How to effectively monitor SCCM 2012 servers? *Can we also monitor Database replication issues between Primary and Child sites? Thanks All in advance.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.