Skip to content

How do I ?

Reporting, Software Updates, Asset Management, App-v

Subforums

  1. if you can create queries then you can have dynamic collections

    • 585 posts
  2. DCM, allows you to set baselines throughout your organisation to identify prohibited software or out of compliance software

    • 45 posts
  3. Creating, editing and viewing reports within SCCM

    • 978 posts
  1. One user has requested an application from software store and it has been installed on his machine as well however later user found that he had requested the wrong application so he had uninstalled it using software store uninstall option. The issue is now whenever user login to the machine he is getting the pop up "New software is available" and software store is showing the old application as available. Is there any way to remove it?

    • 0 replies
    • 6k views
  2. I have some new HP Pro One 600 All In One units I am trying to pxe boot to run a task sequence on. Everything is normal until it starts to configure network settings, once that pop-up goes away it reboots. When I hit f8 and run an ipconfig it does not have an IP or anything. I am pretty sure I have the right drivers for the nic but could be wrong. When checking the smsts.log I get the following four errors, in order: Failed to download pxe variable file. Code(0x00000001) PxeGetPxeData failed with 0x80004005 RegOpenKeyExW failed for Software\Microsoft\SMS\Task Sequence GetTsRegValue() failed. 0x80070002. Hopefully it is just a checkbox somewhere but have be…

  3. installation of oracle 10g using sccm2012 pls explain or any video

    • 1 reply
    • 3.4k views
  4. Hello, I've this hierarchy of CM12 implemented in lab, whereby the CAS is installed with its site database server is installed remotely i.e. the SQL server used is not installed on the site server for CAS. The remote SQL server has only database engine service and reporting service (SSRS) installed and configured. Both are validated to be working OK. Now CAS (Central Admin Site) got installed OK, a primary site also got installed and hooked to existing hierarchy OK. Further...I would like to install the reporting services point onto site server housing CAS. When wizard is initiated it reaches the point where i specify the remote site database server; site databas…

    • 1 reply
    • 4.1k views
  5. Started by way82,

    Hi, I am doing OSD using SCCM 2012 and wondering if I could assigned a dynamic computer name in my TS. Right now i am using OSDComputerName variable which will prompt to enter the computer name manually after I selected the TS to run on an unknown computer. But I want it to auto rename based on "City code + number" structure like below so that I don't have to manually enter the computer name. If this is possible, please share steps. DL+123

  6. Hi, i have been trying to deploy office 365 Pro Plus through sccm 2012. but after sometime received the message from software center as as installation failed.The software change returned error code 0x87D00324(-2016410844).I have checked the application on client machine,i could find the installation is successful,all components for office 365 has been installed.All working fine also.But the deployment status shows error as i mentioned earlier. first my detection rule was file type,at that time also i could install office 365 ,but received same error message. then i changed detection method to registry,HKEY_LOCAL_MACHINE Software\Microsoft\Windows\CurrentVers…

    • 1 reply
    • 13.8k views
  7. Hello everyone!; Friend need your valuable help, I have taken many days trying to install and uninstall the version 2013 2010, create a package to uninstall lync 2010; Uninstall ok... but with that error to finish. the software change returned error code 0x1 (1). This also leaves me in the log; anyone knows anything about this error. Attach APPENFORCE.LOG EXECMGR.LOG

  8. I'm investigating using SCCM 2012 R2 and Intune to manage my Domain Joined Devices. One thing that isn't clear to me and I hope someone can answer Can a Windows 8.1 domain joined machine be enrolled as a mobile device in SCCM in order to utuilize the remote Wipe functionality that SCCM and Intune can provide? I've played around with the products and I can do everything excepot enrol a domain joined PC as a mobile device

    • 0 replies
    • 2.9k views
  9. Hi Guys, I was wondering what is a standard or best practice on setting up the drive partition for a Primary Standalone? The way i'm thinking or have is 4: 1. OS 2. Software Package 3. Software Update 4. Images Does that sound about right? Thanks,

    • 0 replies
    • 2.6k views
  10. Hi , does somebody know the correct way to deploy (on windows startup) first a application and then a paket ? For example i want to install a application an then i have to change some files of that application with a batch file. Thanks for your help ...

    • 2 replies
    • 3.8k views
  11. Hi All- Im having an issue with getting Dynamic Applications and Packages to be installed during the TS. I had it working fine last week but it just seemed to stop and Im kinda at ends here. So, where Im at now is that I can execute the dbo.RetrieveApplications and dbo.RetrievePackages SPs with the computer's MAC and it lists off all of the applications and packages to be installed. In the ztigather.log file it also picks up both applications and packages and assigned them variables: About to issue SQL statement: EXECUTE RetrievePackages '00:50:56:93:2D:07' ZTIGather 5/20/2015 10:45:42 AM 0 (0x0000) Successfully queried the database. ZTIGather 5/20/2015 10:45:4…

  12. Hey Guys - Our company has an extensive OSD Task Sequence which incorporates many scripts and custom processes. For a variety of reasons, it's been decided that we start using Dell's ImageDirect. In this scenario, once we unbox systems, they want OSD to still be applied - but to the existing image on the PC - not re-apply the OS I created a Windows 7 image via imagedirect, downloaded it, and applied it to a test system. Currently, it would boot to Windows' mini-setup if powered on. I took our existing OSD TS and basically removed any steps where OSD applies the image, but steps which come after it that are still required are failing. For example, for a test I…

  13. Started by hpaulus,

    Hey guys im new on SCCM 2012, I read a lot and I install a SCCM following your instruction, thanks a lot. At the moment Im stucked in my lab trying to set the BIOS supervisor password on a TS. This is the information: Machine: Lenovo M92P/M93P ThinkCentre OS: Win7 Pro I got everything working nice but my department require BIOS password for all machines (more than 1000), I research on lenovo website with no success and Im looking a solution or advise if I have to use a TS or Script or a command line, something that Works!!!!. I found this .... (Get-WmiObject -Class Lenovo_SetBiosSetting -Namespace root\wmi -ComputerName computername -ErrorAction Stop)…

  14. Hello, Please help me i am facing below problem very long time, When i am install Application (Adobe reader,Office 2010,Mozilla etc) through Task sequence on Workgroup machine, below error is coming . "Task sequence : Build & Capture X86 Has failed with the error code (0x80004005)" Please help me thanks for advance.

  15. I have an SCCM 2012 r2 environment up and working all the system checks are green and I am not experiencing any issues between servers. When I do a OSD I get the following error message at this running action: Apply Windows Settings, The task Sequence has failed with the error code (0x80004005) I have the SMSTS log from the computer and I will attach it. I also have a report from the history of task sequences that I will try and up load Can someone please look and see what I need to do to get deployments to work. Thanks very much in advance Morris LOGGING: Finalize process ID set to 756 TSBootShell 5/14/2015 2:07:06 PM 760 (0x02F8) ===========================…

    • 0 replies
    • 5k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.