boot images
modifying boot images in ConfigMgr or using imagex/dism
57 topics in this forum
-
I have a semi-quick question. How can I implement an automated solution that executes the diskpart command before the TS begins? We maintain quite a few enctrypted laptops in my organization. As a result, no deployments will run until we perform diskpart. I already have a correct script file in place that will automate the commands needed. What I would like is to automate the actual diskpart command. Currently, once I boot using a USB flash drive, I have to press F8 to get the command window, I then have to switch to the root of the flash drive and type diskpart /s diskpart.txt. I would like this process to be automatic once I boot using the flash drive. How ca…
-
- 17 replies
- 47.2k views
- 1 follower
-
-
Here are the command needed to add drivers to a custom WIM 1. Make sure you have Windows Automated Installation Kit installed (make sure you have the latest version) 2. Open "Deployment Tools Command Prompt" (Start -> All programs -> right click on Microsoft Windows AIK, choose Run As administrator) 3. Copy base files to c:\winpe (change x86 to amd64 for 64bit) copype x86 c:\winpe 4. Mount imagefile Dism /mount-wim /wimfile:c:\winpe\winpe.wim /index:1 /mountdir:c:\winpe\mount 5. Copy all drivers into a catalog for example c:\temp 6. Inject custom drivers Dism /image:C:\winpe\mount /Add-Driver /driver:C:\temp /recurse …
-
- 4 replies
- 118.4k views
-
-
DISM.exe is a new command line tool included in the Windows Automated Installation Kit (Windows AIK) 2.0. You can use DISM to service Windows images, both WIM and VHD files. This is a useful tool that can be used to add/remove device drivers, OS Packages, hotfixes, etc. Here is how to create a custom boot image with diffrent keyboard layout And if read closly you will learn how to modify the registry and filstructure on a WIM file. 1. Make sure you have Windows Automated Installation Kit installed (make sure you have the latest version) 2. Open "Deployment Tools Command Prompt" (Start -> All programs -> Microsoft Windows AIK) 3. Copy base files to c:\w…
-
- 5 replies
- 76.1k views
- 1 follower
-
-
How can I make troubleshooting failed deployments easier using a customised boot image Why do we want to do this ? We've all seen OSD fail for some reason or another, wouldn't it be nice to have a set of tools included in your boot.wim file to help you make the job of troubleshooting easier, yes it would. In this example, we will use some 3rd party shareware to allow us to add new abilities to our boot image using easy to type commands which you (or the Technician) can tell the user to type in on an F8 console. The commands are: assistme - remotely list the IP address and disable the firewall, enable winvnc so that a user can view/control a WinPE session to troublesho…
-
- 5 replies
- 19.5k views
-
-
Hi All I have special requirement where the offline task sequence media needs to be used to image the laptops, but in following manner: - TS media with autorun is burnt to a USB as bootable - User being logged in to the machine, if he wants to reimage the machine, he just plugin the USB and run launchmedia.bat or any other custom script. Is there any possibility to achieve the above requirement. Thank you Regards Ramesh
-
- 0 replies
- 2k views
-
-
Hi Gurus, I have been using Onevinn's TSCommander by the brilliant Johann, but it fails in an environment where I have a forest with 2 subdomains. Got ~90 DCs, trust is full, but since the ConfigMgr site server is in Domain A, when I image computers in Domain B, the MoveToOU server-side script won't find a distinguished name - I think the built-in underlying scripts were never meant to work in such a scenario. Onevinn's Event log says, trying to find DN for the computer... but fails, so no OU move, nor addToADGroup, nothing works... Trying to run a custom script, but I have no other ideas than running (get-adforest).domains | % {get-adcomputer <computer> …
-
- 2 replies
- 2.6k views
-
-
Hello all, I have a windows 10 image that I am deploying to devices which is currently version 1703. This is obviously not ideal being almost 3 years old. Is there a relatively painless way to update this image or will I need to install and update on a system and then recapture this install image? Thanks.
-
- 1 reply
- 2.9k views
-
-
I have some Dell computers that are killing the task sequence because during a reboot, they stay powered off and I have to unplug the power cable and plug it back in to get the power back on. How can I force my task sequence to continue even after such a prolonged period of being powered off?
-
- 0 replies
- 2.2k views
- 1 follower
-
-
I was attempting to create a new boot image (testing concept) and the following error message occurred after the WIM loaded. The following file is missing or corrupt.... 0xc0000359 megasas2.sys I am using a 64 bit boot image, with the Dell WinPE driver cab (v10) loaded. What is causing this issue?
-
- 3 replies
- 6.9k views
- 1 follower
-
-
Hello, I have been trying to create a new boot image using MDT but it completes with 1 error. Below is the output that I saved in the text file at the end of the boot image creation wizard. I am not sure what the below log indicates. I would appreciate any input. The scenario is that I am trying to create the boot image on the primary site server of the sccm 2012. The Microsoft Deployment Toolkit 2012 (6.0.2223.0) is integrated with it. Started processing. Creating boot image. Copying WIM file. Mounting WIM file. WIM file mounted. Setting Windows PE system root. Set Windows PE system root. Set Windows PE scratch space. Adding standard components. Adding c…
-
- 2 replies
- 7.8k views
- 1 follower
-
-
Greetings, We had an outside service build us out a SCCM 2012 R2 deployment and they "trained" us on using it after it was rolled out. They created a 64bit boot image that we used to boot into and image 64bit Operating systems but 32 bit was never tested. I need to test some 32 bit machines but I noticed the 32 bit option is not showing up. I even went so far as to create a new boot image as described here https://technet.microsoft.com/en-us/library/hh397288.aspx Any ideas as to what is going on? Thanks.
-
- 2 replies
- 6.4k views
-
-
Hi All. I long work with WDS, and everything works properly. Today was purchased a new notebook, DELL Inspiron13 5000 series website This model comes without a network card (wifi only), but we bought usb ethernet adapters (DELL FM76N). The problem appears when I try to load the image of the pc (after sysprep, ecc) on WDS. The drivers of the USB nic appear not loaded. I tried to install them manually (SHIFT + F10, drvload, etc.) but I still do not have connectivity. On different post I read that being USB, when the boot image is loaded, it is reset USB BUS, so the USB network adapter loses connectivity. Has anyone encountered similar problems? Thank you all f…
-
- 3 replies
- 4.2k views
-
-
So I have been trying to capture images of windows 10 machines with capture media. I know this is not the best way to do it but my boss wants images of every department with all software installed. This was working fine with windows 7. When I attempt to do it with windows 10 machines it fails during sysprep with the useless error code 0x00004005. This machine has never been syspreped so it's not hitting the limit. I am using SCCM 1511 with a single primary site. I have created the new Capture media since the upgrade to 1511. MDT is installed. It seems to be an issue not with the server but with the capture as it won't even get through sysprep on the reference mach…
-
- 3 replies
- 8.7k views
-
-
Dear, I've upgrade our SCCM 2012 R2 environment to 2012 R2 SP1 including the WADK 10 for fully support of Windows 10. I re-created the boot images and injected the needed boot drivers including the scsi driver of VMWare. Everything is working normal, all my physical hardware can be imaged except a Virtual Machine. I've tried in VMWare Workstation / Player as VCenter (ESXi) but the harddisk (IDE/SATA or SCSI) won't be recognized! With the command DRVLOAD i've tried several other SCSI / PVSCSI drivers from VMWARE tools but none is working. I do not understand why this isn't working anymore in WinPE 10, in my previous WinPE 5 (WADK 8.1) i had no tr…
-
-
- 2 replies
- 4.6k views
-
-
I am encountering the problem where WinPE reboots after a few minutes while I am attempting to deploy an operating system. It looks like the computer I have needs a NIC driver added to WinPE. My real problem is that when I attempt to import the drivers this is what I get: Looking at DriverCatalog.log I see: Looking at SmsAdminUI.log I see: I asked a co-worker of mine to import the drivers I have and everything worked just fine for him. Any ideas on what might be going on would be appreciated. SCCM 2012 R2 SP1 CU1 running on Server 2012 R2
-
- 0 replies
- 3.7k views
-
