Skip to content

How do I ?

Reporting, Software Updates, Asset Management, App-v

Subforums

  1. if you can create queries then you can have dynamic collections

    • 585 posts
  2. DCM, allows you to set baselines throughout your organisation to identify prohibited software or out of compliance software

    • 45 posts
  3. Creating, editing and viewing reports within SCCM

    • 978 posts
  1. Started by MAC456,

    Hi Guys, I am having some bad problems with our SCCM R2 server. Which started with WDS not starting. After going through the logs I have decided to remove both roles, WDS and PSP. WDS I can remove ok. PSP, not as easy. It is giving me "this pxe service point contains packages. remove all packages from the pxe service point before removing the pxe service point role from this server" error message. I have checked and doubled checked and I cannot see anything located within this share. Does anyone have any ideas? I have read about using sql, could anyone break down exactly what to do with that as I am not the best at SQL (at all).

    • 2 replies
    • 3.9k views
  2. Started by Kevin79,

    I just set up a secondary site for a remote location. When I look at "Site Systems" on my secondary site, it shows "ConfigMgr management point", should there be something listed for a Proxy Management Point? If I have clients that are originally installed at my primary site but then move to my remote site (I.E. a laptop user goes to the site) will the client then use my secondary site?

  3. Hi Guyz, MY setup 1. Windows 2003 Server R2 with Sp1 configured with AD/DNS/DHCP IP 192.168.2.10 DHCP configured - 192.168.2.0/24 2. Windows 2003 Server R2 Sp1 SMS 2003 installed 3. Windows 2008 Server r2 sp1 SCCM 2007 with Sp1 4. 4 XP client 2 Win7 Client 2 XP client for SMS 2003 2 XP Client for SCCM 2007 1Win7 for SMS 2003 1 Win7 for SCCM scenario --> Need to run both server Problem i am facing 1. after installation of SCCM 2007 server both clients are unbale to search SITECODE 2. how to configure DHCP for two different SUBNET's 3. how is this possible to run both SMS and SCCM working at same time Pleas…

  4. I am currently adding a new hardware platform to our Windows XP task sequence - HP8460P I have Imported some new Intel Mass Storage Drivers (Downloaded from HP), they were imported to the “HP8460P” driver package however when I attempt to select the mass storage drivers in the task sequence they are not available. They are visible within the package as "SCSIAdapter" I have deleted them from the site and then re-imported them but they remain unavailable, I have tried deleting them and changing the class (hdc, SCSIAdapter) but again they remain unavailable. I have also tried adding them to a different package but they remain elusive. I am aware of changing the …

  5. Started by rfaber,

    Our company recently approved a new laptop with 2 hard drives as an available standard. When setting it up for OSD we just went thru the normal procedures that we do with all tha approved hardware platforms but we have an issue with how WinPE sees the hard drives. The two hard drives are a smaller one for OS and a bigger one for data. We specified with the manufacture that the smaller drvie is the 1st HDD and the larger is the 2nd. Both are advanced format drives. The OEM install sees the small drive as disk 0, so does DOS, so does Windows, but WinPE sees it as disk 1 and the larger drive as disk 0. Our standard TS specifies Format and Partiion Disk 0 so when we r…

  6. Started by mjereza,

    Hi Guys I'm new in SCCM and I need help on creating a sccm report that Displays a list of the computers where a specified file name does not appears in the software inventory, as well as information about inventoried files. A computer may appear more than once in the list if it contains more than one copy of the file. So can anyone help with this and the step-by-step guide if that not too much to ask please. Query statements, the works.

    • 0 replies
    • 3k views
  7. Hi in my SCCM server clinets has been discovered but client agent is not getting installed ccm.log is ---> ERROR: Unable to access target machine for request: "150_0_20_149.CABS", machine name: "GROUP32", access denied or invalid network path. $$<SMS_CLIENT_CONFIG_MANAGER><Mon Aug 01 10:50:41.966 2011 India Standard Time><thread=3316 (0xCF4)> Stored request "150_0_20_149.CABS", machine name "GROUP32", in queue "Retry". $$<SMS_CLIENT_CONFIG_MANAGER><Mon Aug 01 10:50:41.966 2011 India Standard Time><thread=3316 (0xCF4)> <======End request: "150_0_20_149.CABS", machine name: "GROUP32". $$<SMS_CLIENT_CONFIG_M…

  8. Started by 2ez24get,

    Last week I finished pushing out the KB977384 hotfix ahead of SCCM 2007 R3 upgrade. Today I finished installing the R3 on the server. I am trying to configure the OEM Prestage but need some help. I have my task sequence which works for Bare metal builds and wanted to either modify the existing TS to include the OEM Prestage or create another TS. If someone has examples or a link I could follow. Thanks.

  9. Hi All, I am running SCCM 2010 with MDT integrated. We have recently created a new Windows 7 images and setup the drivers for all the required models. These all work fine using both methods of driver deployment (Auto Apply Drives via SCCM driver database and Apply Driver Package). Our preferred method for deploying drivers is the "Apply Driver Package" as this is the easiest to upgrade drivers. I have recently been tasked to add a new model (Toshiba Portege R830) to SCCM. As we use a USB flash drive to boot I was able to work out the three drivers (NIC, HDC, USB - yes this model has USB3 and would disconnect the USB flash drive before loading the drivers if the US…

    • 1 reply
    • 7.9k views
  10. Creating a Package for USMT4 was very easy. However, I have been unable to figure out the process within ConfigMgr 2012. I have been able to install and configure SCCM 2012 as far as building and capturing a Win7 SP1 image, but the USMT package creation eludes me. Perhaps someone can point me to a URL or give me a quick explaination?? Thanks in advance!

  11. does anyone know how to disable automatic updates with Flash Player 10.3. This version installs a new control panel applet and on the advanced tab for users it is selected to check for updates automatically. In other versions i was able to edit the Flash install MSI with orca and switch the checkbox and propery fields to autoupdating from 1 to 0 and worked like a charm. this seems not to work on this version. I tried putting the mms.cfg file in proper folder but its still selected for autoupdating for users. This causes a problem because non of our users have admin rights to install software, leaving this annoying popup box on the screen everytime an update is needed.

    • 5 replies
    • 13.1k views
  12. Started by btb1205e,

    Hello all, Just had a question about migrating from SCCM 07 to 12. I want to set this up in my lab. Currently, I have one site server and I setup another server on the domain which will run SCCM 2012. My question is do I set it up as standalone or add to existing hierarchy in order to do the migration? Thanks for any help!!

  13. Started by dpatel,

    Hello, This is my first post and i'm having some trouble with SCCM SUP, I can deploy updates to Win XP machines but nothing to my Win 7x64 virtual machines Using SCCM 2007 SP2, WSUS 3.0 SP2 ON Win Server 2008 R2 Do i need to install a update or hotfix for this to work? thanks in advance

    • 3 replies
    • 4.8k views
  14. Hello, I am trying to turn on XP SP3 Windows Firewall in our environment and am having trouble allowing SMS 2003 through using a GPO. Below is what I have so far and I keep receiving an error from SMS stating it cannot ping the computer I am testing with. I have allow local exceptions disabled as our users are local admins. Any ideas? Port Exceptions: TCP 80 443 135 139 445 UDP 137 138 67 68 Program exception: C:\Windows\System32\CCM\SMSCliUI.exe:*:Enabled:SMS

    • 3 replies
    • 4.6k views
  15. Started by Roopa,

    Hi Team, I need your help here. I'm pretty new to working on DMZ servers and managing them. At my company they want to get their DMZ Servers managed by SCCM (manual certificate enrollment). I'm not sure how i need to start and reach to my goal of getting this set up. I went through couple of forums on the web and they all say that DMZ servers should be a part of workgroup computers, we need to open up the ports. Then they also say we might need to set up a primary DMZ site so that it can communicate with the primary sccm site server. I'm confused here. Can you please tell me the step by step procedure on what should i follow and how i can i achieve this? …

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.