Skip to content

USMT

scanstate and loadstate, computer association, USMT backup of users data and settings within SCCM 2007

  1. Dear all, I need your help. In our USMT process, we backup registry settings which contains folder redirection of My documents (Personal) to C:\Data in our environment. To do this operation we have customized out MigUser.xml file which is attached in this thread. So when er use the loadstate log says no error but the rdirection is not happening. It stays at default user document folder. For your information we are preparing the migration of users from Windows 8.0 to Windows 8.1. In existing Windows 8.0 environment the user My Documents is mapped to C:\Data. We want to restore the same settings when user is migrated to Windows 8.1. We really need help. Attache…

  2. Hi All, Im currently lookig to implimenting SCCM 2007 R2 sp2 for windows 7 deployment and so far have been successful at fully deploying an image precreated, gathering user data and even restoring after installation, along with app push etc.then i began to test the same on a single laptop, only to find i didnt have enough storage to save the users profile which was around 50Gb. To try to combat this, i mapped a network path of \\NASutilityBox\ to M:\ and then mapped that as a new state migration point. Since i have done that, i can no longer get beyond "Request User State Storage" and a error 0x00004005 and inside of the smsts.log in c:\windows\system32\ccm the fo…

    • 7 replies
    • 14.5k views
  3. First time writer and happy to be part of the Forum OK so I've looked around and read as much as i could find but still having issues. We have an office of about 30 users, most on windows 7 X64, some have office 2007 and some have 2010. We are looking to clean up their systems and get them onto a uniform image (win7 x64 as well). Most of the systems are full of adware/spyware and old uninstallable software that no one uses anymore (Realplayer? AOL?)I am moving all their files/favorites to a file share for backups. after looking at the machines the only things i really want to migrate are their office settings: signatures, dictionaries, layout/settings e…

  4. Started by Creed,

    Hi, I have set up a capture sequence and an image/restore sequence. I ran the capture for 3 pcs and then the image/restore and everything worked. Last night I set 11 computers to do the same sequences and all of them succeeded at capture and image, but 6 of them failed the restore process. All of the machines have the same client 5.00.8239.1000 I am trying the ones that didn't work again tonight and will likely try an agent repair through right click tools on those that didn't work. As well as triggering a restart. Any other ideas?

    • 1 reply
    • 2.7k views
  5. Started by bowlen,

    Hi Guys, I'm needing a bit of help getting USMT working with OSD. I'm having a few issues in that USMT doesn't seem to work. There's no error messages or anything like that. It just doesn't load user data (I'm testing with background images and folders saved to the desktop). Are there any best practice guides etc for getting USMT working in an OSD Task Sequence? I can't seem to find it anywhere online. OSD seems to be working well, and it seems like the data for USMT is being copied to my SCCM server, as I can see the drive filling up (dedicated USMT drive), but obviously something is happening when it restores the data. When creating the task sequence, I've…

  6. I have a quick question. I have been trying to have a USMT offline task sequence that can run directly from a USB flash drive. While the normal USMT can pull all the settings like computer name, software installed, etc without any problem; I find myself having a hard time to be able to do similar in offline mode. The idea is this. 1) Boot from flash drive, 2) Read the settings from the offline XP 3) Set all variables (language, computer name, software, etc) 4) capture profile via USMT offline 5) install Windows 7 6) Restore data via USMT. I go everything working except the vbs to read the computer name and set it in the OSDComputerName variable. All o…

  7. Hello, I am working on some task sequences to migrate data during a side by side migration in OSD. We are using SCCM 2007 R2 with MDT 2010 integrated. I have USMT 4.0 installed on the primary site. I have used ANYWEBs recommendations, and can get the In Place Migration with Hardlinking to work just fine, but I need a solution when upgrading the hardware also. Up until now, I was under the impression that I could create a Computer Association (Source and Destination) and then use a single task sequence to capture the data from one pc, migrate it to a Storage Point, apply the image to a new baremetal machine, and then restore the data to the new machine. I have …

  8. We have a primary site with 13 DP and each DP has SMP setup. Boundaries and Boundary Group are setup with separate Site assignment and Content Server. The Site Assignment are setup with AD Site and IP Segments, while the Content Servers are setup with Subnet. When I tried to use USMT TS with SCCM 2012 R2 CU2, the computer will request SMP from the MP, and received 13 SMP by viewing the Log File, and it will randomly choose any one of them, instead of using the one assigned to it. I can check the property of the computer and it's showing the correct SITE, and it has already been defined in the Subnet Group. I have verified there are no overlapping of boundaries. …

  9. Started by x86x64,

    Hi, I want migrate a wallpaper only if path "HKCU\Control Panel\Desktop [WallPaper]" not equal "C:\temp\my_wallpaper.jpg". If different of "C:\temp\my_wallpaper.jpg" : OK to migrate. my xml : <unconditionalExclude> <objectSet> <condition negation="Yes">MigXmlHelper.DoesStringContentEqual("Registry","HKCU\Control Panel\Desktop [WallPaper]","C:\temp\my_wallpaper.jpg")</condition> <pattern type="Registry">HKCU\Control Panel\Desktop [WallPaper]</pattern> <pattern type="Registry">HKCU\Software\Microsoft\Windows\CurrentVersion\Themes\* [*]</pattern> </objectSet> </unconditionalExclude> But don't work. W…

    • 0 replies
    • 3.1k views
  10. Started by FromTheUnderground,

    Hey everyone. I have having some difficulties troubleshooting a USMT restore Task Sequence. I have a computer that is already image and needs a user's data migrated to it. I have already created the computer association and when I view the recovery information, everything looks good. The problem is when I deploy my TS, as soon as the Restore User State starts to initialize, it fails with code 0x8007000B. Below is the Loadstate log. Any help would be greatly appreciated. 2014-12-15 15:55:34, Info [0x000000] LOADSTATE.EXE Version 6.3.9600.17029[gle=0x000000b7] 2014-12-15 15:55:34, Info [0x000000] USMT Started at 2014/12/15:15:55:34.…

  11. We're fine with backing up themes, wallpapers and other display customizations (DPI, window color & appearance etc.) because it gives us something to go back to or restore if its truly need. However, we do not want to restore the aforementioned on the destination PC by default. I must be doing something wrong and I can't figure out what and need some help. I've read some great write ups on the subject: USMT Custom XML the Free and Easy Way USMT 4.0 Custom Sample - Blocking Wallpaper and Theme Migration from Windows Vista and Windows 7 Blocking Wallpaper Migration with USMT (or: you are a jerk) and used part of their example XML in my own, but everything (wallpap…

    • 2 replies
    • 8.9k views
  12. Cannot solve this. Windows 7 32bit Currently we have one drive in our computers partitioned in to 2. (C: & D:) New setup One drive one partition. (C: only) Right now users store there data on the D: like documents and PST's. And some machines have the pagefile.sys Right now its easy I tell it to migrate the whole drive and I exclude some folders with an unconditional exlude. Works great. Even doesnt get the pagefile.sys on the D: If I run the loadstate on the machine now with just the one drive it dumps everything that was on the D: to the C:. Very messy plus the PSTs are now not connected. So I tried a realitive move comand to try an…

    • 0 replies
    • 4.2k views
  13. Sooo, I'm am trying to create a config.xml file so I can exclude certain items from being migrated. When I run the command that MS says to do this (scanstate /i:migapp.xml /i:miguser.xml /genconfig:config.xml /v:13) it consistently returns a failed code of 29. When I look in the scanstate.log file it says there is a syntax error in the XML file. This happens to both the MigApp and the MigUser, it just depends on which one I put first. If I run the command with just thescanstate /genconfig:config.xml /v:13 it runs fine but doesn't really help me. I just downloaded the most recent MigApp.xml file for support for Office 2010 and doubt that MS would publish a file like t…

    • 5 replies
    • 12.8k views
  14. Started by boyjaew2,

    Hey all, Is there a super detailed tutorial for USMT someone can point me to? I'm getting ready to experiment with this for the first time using SCCM 2012 R2. Previously I have used the hardlinking method to do in place upgrades from win xp to 7 using a USB and some scripting, but have no clue how to utilize sccm in this regard. My goals are to be able to do in place OS refresh - same hardware, OS refresh from win 7 to win 7 without having to migrate files, settings and install programs again manually - I think I was able to do that previously. It's been a while though. I could be wrong about not having to re-install software. Secondly, a migration from old ha…

    • 2 replies
    • 5.5k views
  15. Hi, I have a scenario that I need to figure out a solution to, in the event that it happens in the real world. I have created a few task sequences in SCCM for zero/lite touch imaging using the built in "Capture User State" and "Restore User State" actions. The TS performs the typical set of actions, capture, image, and restore (along with other custom commands). The TS works great in the lab and in a controlled production environment; however, I foresee an issue that I do not know how to resolve. What happens when a technician runs the TS on some workstations and one workstation fails half way through the imaging piece or fails during the restore state? How do I g…

    • 4 replies
    • 15k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.