Windows 7
Windows 7, the latest and greatest Windows Client operating system, post your problems, tips and tricks here
91 topics in this forum
-
Rebooted an old Dell 980 (that has been bulletproof for years) saw the windows boot image, then BLACK screen and a live (movable) cursor. Nothing I do seems to affect it. Replaced the (weak old) power supply. now it boots to a black screen faster. tried using a win 7 recovery iso and was able to get it to attempt to Restore. recent restore (few days ago) same problem. restore from 20 days ago same problem. restore for 21 days ago, Restore died with ox800700B7 error. (my noob guess is a bad driver update by Avast updater, but no way to know which one. Or even if it happened.) Thanks for listening. (I have a win10 workstation, winXP workstation…
-
- 1 reply
- 3.6k views
-
-
Why is the c:\Windows\System folder empty in windows 7? i Actually just realized that yesterday... Thanks.
-
- 3 replies
- 15.9k views
-
-
The issue I'm describing is VERY FRUSTRATING. We are decommissioning a proxy server yet our firewall is still showing windows 7 computers hitting the proxy server. Here are the steps that I've taken and what I've looked at on one of the computers in question. DESELECTED "Automatically Detect Settings" Set "Use automatic configuration script" to reference the CORRECT proxy server that is currently in use DESELECTED AND CLEARED the entry under the "Proxy Server" entry for "Use a proxy server for your LAN......" Fields are blank and UNCHECKED Edited the registry and removed ALL references to the proxy server that we DO NOT want to reference (…
-
- 1 reply
- 10.1k views
- 1 follower
-
-
I'm dual booting Win7 and Kali Linux. Are there any risks to encrypting my hard drive as far as corruption? Any ideas as to backing up both partitions in case something goes wrong?
-
- 0 replies
- 4.6k views
- 1 follower
-
-
Hello, I have a issue when deploying my task sequences with our Windows 7 Enterprise x64 it has IE and we need to upgrade to IE 11. The deployment was created by using IEAK 11. After the task sequence is finished I go to the software center and run the upgrade to IE 11 which works fine. However when a new user tries to logon it get the error of "User Profile service fail to logon" I did some digging and apparently it changes the permissions on the Default user profile in turn it cannot create a new user profile (domain account) If an account was logged on before the upgrade there are no issues. Here are some questions: 1. Is there a way to…
-
- 5 replies
- 6.5k views
- 3 followers
-
-
Hello, I have been using SCCM 2012 to image Network Computers by using a Network boot with installed image/task. All machines I have been imaging have been Dell Optiplex Windows 7 machines. There is no Network driver in the package so I manually install that when imaging is complete Recently i was given 3 HP Slimline Desktops 260 -p109 to image with Windows 10 installed on them ( I am the Administrator for several libraries) However I am getting an error when I try to PXE boot/install. When I attempted to manually install and boot from CD Windows 7 installs but there is no USB drivers so I can not proceed. ( no mouse/keyboard working) I am fairly n…
-
-
- 2 replies
- 4k views
-
-
Is there an easy way for me to script a change to the default wallpaper picture position to fit for all users? The wallpaper image is already correct. I just want to change the picture position to fit for all users. Thanks in advance!
-
- 2 replies
- 5.8k views
- 2 followers
-
-
I have been working on getting the migration xml files dialed in to do what I need them to do and most of what I have edited so far works as intended. However I would like to exclude all attached drives except for c:\. I am able to exclude any drive letter I want but instead of repeating the same chunk of code to exclude all 25 drives letters is it possible to use the != operator? I have tinkered with the below example but it doesn't seem to work as I would expect. Am I thinking to much like a programmer, do I have the syntax wrong, or does xml just not support common operators like that? Example. <pattern type="File">!=c:\*[*]</pattern>
-
- 0 replies
- 2.9k views
-
-
So I have and unattend usb flash drive that works perfectly when installing Win7 IE8. I just updated my resource image to include IE 11 and now I get this: I have read several times over that IE 10 and IE 11 do something weird to your unattended. But I need to know what to do here with my unattended to get this thing fixed. So I have seen several ads to just commit out IE but thats dont going to work. Please help me resolve this issue. I am days behind because of this.
-
- 0 replies
- 3.6k views
-
-
Has anyone had experience using MDT 2013 to image an EliteBook 840 G3 with the solid state drive with NVM Express? I am trying to install Windows 7 Enterprise 64 bit using MDT 2013. I can drop the image but when it boots back up after Windows is installed the Windows flag starts to appear and then it freezes. I have integrated these into the custom WIM file. KB2990940 and KB3087873 and also the USB 3.0 driver according to the HP document C05040446. Any suggestions that I can try?
-
- 5 replies
- 6.6k views
- 1 follower
-
-
Hello to all, I open my record again at the forum with a problem that is driving me crazy I have in my work environment a problem with many accounts that are abnormally block. I started all the troubleshooting steps, and slowly I'm probably coming to realize what it is, but I have this event that I can not read well: EventId: 5 The kerberos client received a KRB_AP_ERR_TKT_NYV error from the server% 1. This Indicates That the ticket used against That server is not yet valid (in relationship to That time server). Contact your system administrator to make sure the client and server times are in sync, and That the KDC in realm% 2 is in sync with the KDC in…
-
- 0 replies
- 6.1k views
-
-
I want to know if anyone has a script or tutorial on creating a script to "enable enterprise mode" and to allow enterprise mode to use a "website list" to manage certain sites. I know this should be fairly simple to do but I am new to scripting so I felt after several hours of looking and obviously creating the wrong searches, it time to ask the pros. Would prefer vbscript, but will not refuse powershell.
-
- 0 replies
- 4k views
-
-
I am very new to SCCM and am attempting to capture my first image but it keeps failing with the error 0x80070035 during the "capture the reference machine" process. My reference PC is a standalone HP 800G1 running Windows 7 SP1 x64 PC in a workgroup and have created the boot image iso on a DVD. I run the tsmbautorun.exe which runs sysprep and reboots the PC, then capture process starts and fails with the “image capture wizard has failed with the error code (0x80070035)" error. From the research I've done, it looks like an authentication error but I cannot see where its failing. I have tried this several times using both my credentials and the admin credentials. Ob…
-
- 0 replies
- 4.8k views
- 1 follower
-
-
We are in the process of upgrading our workstation environment to IE11. In testing we have sporadically seen where a .aspx forwarded download link (ie all microsoft.com downloads) do not work. On the PC's affected the Open/save/Save as window opens (the pop out, not the toolbar at bottom). Once a selection is made and regardless of selection, the popup closes and nothing happens. Any ideas? I have reset IE settings to default with no change. Rolling back to ie10 it works, reupgrading to 11 breaks it again.
-
- 3 replies
- 4.3k views
-
-
My company is going through an exercise to retire all of the SHA-1 certificates in the environment due to its upcoming EOL date by MSFT. One of the larger pools of devices using a SHA-1 cert are the end user devices, which use a self-signed SHA-1 certificate when using RDP. Most of the info i've found online so far only discuss how to force this cert to use SHA-1 with registry edits, but nothing about SHA-2. Has anyone gone through this exercise yet? If not you may need to soon. Looking for some technical pointers on how to accomplish this. Also, we currently use the self-signed cert that each device generates when connecting. If i force a new certificate from a…
-
- 0 replies
- 5.8k views
- 1 follower
-
