Skip to content

How do I ?

Reporting, Software Updates, Asset Management, App-v

Subforums

  1. if you can create queries then you can have dynamic collections

    • 585 posts
  2. DCM, allows you to set baselines throughout your organisation to identify prohibited software or out of compliance software

    • 45 posts
  3. Creating, editing and viewing reports within SCCM

    • 978 posts
  1. Hi Folks We are using SCCM 2007 R2 & USMT 4.0 to migrate OS using hardlink option. In TS, we specifically mentioned under "Set Task Sequence Variable" step is "OSDStateStorePath" with the value "c:\_SMSTaskSequence\userState". We are using customize option under "Capture user files & setting" option & mentioned three xml files -- MigUser.xml, MigDocs.xml & MigApp.xml. Under "Restore user files & setting" step, we are using standard options only. TS is running fine & new OS is being installed and data is also being restored under respective partitions. Only issue is that we found a folder named "_SMSTaskSequence/userState" in every …

    • 2 replies
    • 5.5k views
  2. Started by Jedan71,

    Hi, I am a complete newbie to this topic, i have inherited a system of sccm 2007 from the outgoing tech.That didnt work properly so i followed the forums on this site for the new System Center 2012 full edition from our volume licence site.. Personally trying to re-engineer how it works and how our outgoing system worked. As looks like a great topic once you can understand it all. I successfully built a single site with added role of app catalog and DP etc, i was able to capture win 7 image and then build tasks to build a new hardware using image, got the new fat client on the machine and domain joined. Working brill, ( many thanks, told many friends about this site) …

  3. Started by Kaaskyker,

    Good day. I'm getting this error on all my newly installed Primary Sites. I had this error before and was able to fix it but didn't keep notes. If someone can assist. Thank you. Error message ID 575 "Could not connect to registry hive HKEY_LOCAL_MACHINE\Software\Microsoft\SMS on computer" Running Server 2008 R2

    • 1 reply
    • 12.1k views
  4. Started by teamfox201,

    Hello, I am trying to create an ISO from my offline media so that we can copy it to a central location and people can make their own bootable USB. The problem is that our complete offline image is almost 11GB and when you create a ISO through the SCCM console, it breaks the ISO up into 8.5 GB and another 2.x GB. There inst an option to leave the whole thing in tact. How can I get only one full sized ISO that others can burn without having to create a bootable USB through the Console itself or does anyone have any programs that I can convert my working offline USB into a bootable ISO? Thanks!

    • 0 replies
    • 4.7k views
  5. I am trying to report 'Top Console User' by using a Sql substring and need to remove the "domain/" from "domain/username." Using the substring, I would like to only get back the username by removing everything before the forward slash. Searching the internet and these forums, I was unable to find something about using the "/" character. I have found some good articles on substrings but I cannot get the function to work with this character. Does anyone know how I could create a query to find top console user and remove the "domain/" ? Thank you in advance for the help! This is my first post, so please let me know if this should be posted in another forum. …

    • 0 replies
    • 5.5k views
  6. Started by Sarah,

    I have created a task sequence which has been working fine. All of a sudden it has stopped working and only works if the software install tasks are disabled. It looks as though the network is an issue but once the install software tasks are disabled, it works fine. Any ideas.

  7. Hi All, I have an application which has contain 14 MSI packes and one EXE file, which will trigger the installation of 14 packages one by one ( it has sequence ) on the node system. The issue is i need to pass the options like Eg. install.exe -i -a , i need to know is it possible to pass with installor options during package creation on sccm2012 for install the application on node system. If possible could you please explain it ... or any other way to resolve it. Please help . Thanks & Best Regards, Zahir Hussain

  8. Started by Jazzee,

    Hi I have already used SCCM to capture/deploy Windows 7 Pro and had very few problems doing so. However, since installing MDT I cannot do it anymore. Due to a change in licensing I am required to deploy W7 Enterprise (Both x86 and x64) across the network. Every time I do it, the task sequence fails with the error: 0x8007000E Having checked the previous post on this issue, I can confirm that there are no updates being deployed to that device collection. Also I have tried to use the previously successful task sequence and get the same error. This is on multiple clients just to make sure it wasnt PC problem SMSTS.LOG: <![LOG[LOGGING: Finalize process ID set to 776…

  9. Started by MaWi,

    Hi, at this very moment I have problems installing the SCCM Client on a recently migrated site. We run the install manually (CCMSETUP.EXE /noservice SMSSITECODE=CS1) and the client gets installed, but there are some things missing in Configuration Manager: - Components Tab only showing components Installed (not enabled) - Actions Tab only showing 2 actions (Machine Policy Retrieval & User Policy Retrieval) - Updates & Configuration Tabs are mssing Automatic site code discovery was unsuccessful (I also ran the ClientAssignment tool and this is working correctly) I also get the following errors in the various CCM logs: CcmExec.log ----------- …

  10. Can System Center 2012 Endpoint Protection be managed/deployed with the mangement console for the 2010 version of Forefront Endpoint? We have licenses for those . We don't have a license for SCCM 2012. Thanks!

    • 4 replies
    • 7.7k views
  11. I am in the early stages of an enterprise wide SCCM 2007 roll out. I can't use ConfigMgr 2012 as we do not have Server 2008 in our Production environment at this stage and it's not likely to happen in the medium term. I have multiple AD domains spread all over the county, a lot with sporadic and limited external connectivity owing to how they are deployed. It looks like I'll be having to create around 50 SCCM 2007 servers in the short term with perhaps another 40 to follow. Noting the geographical dispersion of the AD domains and their at times limited/poor accessability I want to have VMware templates with as much pre-configuring and pre-installation as possible…

  12. Started by Athlona,

    Hi All I am a SCCM 2012 Final Release Version Noob and I am having problems with pushing the Client software & Endpoint anti virus software onto Windows Server 2003 SP2 32bit Servers, It has deployed out to all the Windows Server 2008 r2 SP1 Servers & Windows XP & 7 systems fine... On a failed Server 2003 I can see a ccmsetup in services but it seems it can't start looks like it may have tried to accept the push from the SCCM server... Now I can't seem to remove the service and any attempt to push the client to any of the Windows Server 2003 servers nothing happens at all no ccmsetup in task manager nothing at all!!! Any Help would be grateful... T…

  13. Started by Jensb,

    Hello We have a problem at one of our customers with opening several task sequences. When we try to open it for editing we get the error message and the only error in the logs are the ones you see in the images below. So what I can see its some problem with the WMI class called BDD_RunncommandlineAs and I can’t find that class in wmi either on the Central or the Primary site. We also have tried to reinstall the integration features without any luck. The setup is a Sccm2007 with 1 Central site and 1 Primary on the Central site (where all computers are connected to) there is a MDT 2010 installation with integrated features. On the primay there is a MDT 2008 …

    • 4 replies
    • 4.5k views
  14. I have started a new build of SCCM 2012 using SQL server 2008R2 (enterprise) SP1 CU6 as requested in the micorsoft tech documents. The thing is I am unable to install SCCM 2012. At the point of verifying the database and instance name (leave blank for default) wizard it will not let me go any further than this. It states that I must install a verified version of SQL with appropriate hotfixes which I have. At the moment I am running server 2008R2 SP1 with SQL server 2008 R2 SP1 CU6. Is this the last cumulative update for this flavour of SQL? Am I missing something because this version of SQL is definitely supported according to Microsoft. Thanks Rock…

  15. Hello. I tried to deploy a program with softwarecenter, the installation failed and I just deleted the application within the CCM-Console. well, thats not the issue, because i already know what i did wrong. But I dont get rid of the failed installation status. furthermore, when i try to install the programm without softwarecenter, i get the same error that i got when i tried to install with softwarecenter (the error was, that i cant install that programm for a user - it has to be installed for a system). Seems like theres somewhere a cache that Im not able to clear. I already tried clearing the cache in control panel. Since english is not my native la…

    • 0 replies
    • 3k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.