Skip to content

How do I ?

Reporting, Software Updates, Asset Management, App-v

Subforums

  1. if you can create queries then you can have dynamic collections

    • 585 posts
  2. DCM, allows you to set baselines throughout your organisation to identify prohibited software or out of compliance software

    • 45 posts
  3. Creating, editing and viewing reports within SCCM

    • 978 posts
  1. Hi, I'm wondering if it is possible to pull in only computer objects that are part of a specific Active directory Security group to a collection, and how such a query will look. Has anyone had to do this in the past, and is it possible? Ultimately we would like to separate computers by departments, and our AD access is such that we cannot create new ou's. Thanks. Coenie

  2. Started by ampm24,

    I have a CAS, two Primary, two Secondary, and two DPs. I'm tring to setup the DPs with software updates and do client installs via the Update method. On my primary and secondary servers, this works fine with a GPO tellings those clients to look at their respective SCCM servers for WSUS. This is not working for the DPs. Do I need to tell the workstations at the DP sites to look at the Primary site? I want make sure they get the updates and install the client from the DP itself. Also, when I installed the SUP roll on the DP, it changed the active update point of the Primary server to the DPs server. I changed it back to keep my clients from tring to download updates …

  3. Started by Rocket Man,

    Hoping some one can point me in the right direction. I have extracted and created a driver package for a specific model. I have attached this driver package to my TS with the appropriate WMI query. This TS also services 3 other models with driver packages and WMI queries set accordingly. Once deployed the WMI query works great it only installs the appropriate driver package to the specific model. My problem is that this particular driver package does not install all the drivers for the model even though it has all the drivers needed. I found the problem and have rectified it. Basically I needed to create a single package for one of the drivers using a script. …

  4. I'm currently migrating SCCM 2007 to SCCM 2012 and was looking to see if anyone has or can point me somewhere to find a example sccm 2012 project template. I found for SCCM 2007 but could not find one for 2012. Thanks in advance, Paul

    • 2 replies
    • 8.9k views
  5. Started by Anakin,

    I am installing a secondary site from the console and is achieved except install management point, I get critical error and validate and entire IIS, BITS enabled, remote differential Comprehension, the firewall is disabled, and I istalado other and this has not it wont let me, the installation user accounts as local administrators are on computers, the sql is installed on the server either, but the install fails mp. I have already several days searching and find nothing, all features are enabled als, here I leave the log of mp. secondary server. MPSETUP.LOG <09-27-2012 12:35:34> Found 2 Pre Reqs for Role SMSMP <09-27-2012 12:35:34>…

    • 0 replies
    • 3.1k views
  6. I advertised a package and it's not taking much time to download and install in physical machine but it takes very long time to download in VM machine. Both physical and VM machines are in same subnet. Did anybody faced this issue?

  7. Started by Jason07,

    How to installed sccm client in workgroup what the first things need to do before install sccm client in the server/workstation? as i know it need to install Wins which i not familiar with it. as below link does the below link the correct way to do? http://technet.microsoft.com/en-us/library/bb632567.aspx when i try to type command as follow in the websites above it come with error. as print screen in the attachment. which show Loading of WinsEvnt.dll failed...... need help..also on how to generates the comparison on the latest updates or old updates on particular server...??

  8. Hi I'm installing a secondary site and ends, but in the console I get critical error, in red, I want your help please here I leave the logs and msi.log MPSetup.log Users are at home, also to realize the primary site installation MPSetup.log <08-27-2012 18:50:31> ====================================== ============================== <08-27-2012 18:50:31> Setup Started .... SMSMP <08-27-2012 18:50:31> Parameters: C: \ Program Files \ Microsoft Configuration Manager \ bin \ x64 \ rolesetup.exe / install / siteserver: PRIMARYSITE SMSMP 0 <08-27-2012 18:50:31> Installing Pre Reqs for SMSMP <08-27-2012 18:50:31> ======== Installing P…

    • 0 replies
    • 2.9k views
  9. Started by Anakin,

    Hello Friends in the system console on the node status did not reflect management point or status monitor this site .... both primary and secondary, in this active roles, as I get out again, but was previously installed a secondary site that gave me problems and now none appear

    • 0 replies
    • 2.6k views
  10. Started by SCCMefied,

    Hi I bet all of you have had problems with your PXE points both in SCCM 2007 and SCCM 2012. The 5th time I installed SCCM 2012 I got problems and had to reinstall it. Here is my checklist for reinstalling it. untick the enable PXE checkbox on the distribution point. Answer yes that you want to remove the Windows Deployment service. remove your boot images from your distribution point After 5 minutes. Delete %windir%\temp check with server manager if you can add/remove roles on the server. If WDS is done uninstalling there is a pending boot.Reboot!!! check if the remoteinstall folder is located on your system. If it is delete it. reboot Add the PXE …

  11. Started by Anakin,

    Hi all, as my computers which support AMT discovered, or the characteristic tengon chip as Intel vPro? there any reports?

    • 0 replies
    • 2.3k views
  12. Started by Kingskawn,

    As many here are asking deployments for software and OS the diskspace on servers are almost insuffisant. How do you remedy to that? Our primary site has 300gb of data and there is 20gb left. For example 1 OS (W7 ENT) is taking 3gb and 3gb chopped in D:\SMSPKG (.pkg & .dlt) so everything is doubled. For our migration to 2012 how do you manage this? We do have a monitoring on this diskspace problem but in the end I need to make some room which isn't a solution.

  13. Is there a way or method to expedite implementation in a secondary site? as I have my remote clients are installed fast and easy? valid as they do from my secondary site and not the primary, I have to enable something to make it happen?

      • Like
    • 2 replies
    • 2.8k views
  14. <![LOG[Found remote location 'LOG]!><time=%2211:15:21.836-480"]http://SCCM2012.sc.c...:15:21.836-480" date="09-17-2012" component="ccmsetup" context="" type="0" thread="3304" file="util.cpp:2411"> <![LOG[PROPFIND 'LOG]!><time=%2211:15:21.837-480"]http://SCCM2012.sc.c...:15:21.837-480" date="09-17-2012" component="ccmsetup" context="" type="1" thread="3304" file="httphelper.cpp:802"> <![LOG[Got 401 challenge Retrying with Windows Auth...]LOG]!><time="11:15:21.936-480" date="09-17-2012" component="ccmsetup" context="" type="1" thread="3304" file="httphelper.cpp:1283"> <![LOG[PROPFIND 'LOG]!><time=%2211:15:21.937-480"]http://SC…

  15. Started by gokhan76,

    Hi I deployed and OS through SCCM 2012 succesfully in to a client. I then decided to re-deploy the same client the same task again and again to achive customization with unattended. The third time I tried to do the deploy. PXE boot happened and showed the file size and buffer size and stuff and get stuck. These are the errors I captured from the SCCM 2012. I also cleared PXE last advertisements as well. Here are the some logs: PXE::CBootImageManager::FindMatchingArchitectureBootImage SMSPXE 13/09/2012 5:24:09 PM 3364 (0x0D24) Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777358" ServerName="" Se…

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.