Skip to content

How do I ?

Reporting, Software Updates, Asset Management, App-v

Subforums

  1. if you can create queries then you can have dynamic collections

    • 585 posts
  2. DCM, allows you to set baselines throughout your organisation to identify prohibited software or out of compliance software

    • 45 posts
  3. Creating, editing and viewing reports within SCCM

    • 978 posts
  1. Started by marlonc1980,

    Hello friends, I have a continuous alert in my environment, I always get warnings, which may not be; attached warning data. ===== Severity Type Site code Date / Time System Component Message ID Description Warning Milestone NAP 1/22/2013 9:15:20 AM Server.domain.com SMS_INVENTORY_DATA_LOADER 2703 Inventory Data Loader failed to process the delta MIF file "XHI8C0I5R.MIF" and has moved it to "C:\Program Files\Microsoft Configuration Manager\inboxes\auth\dataldr.box\BADMIFS\2egattbg.MIF." Possible cause: The file attempted to update inventory information in the site database that does not already exist, or the file contains invalid syntax. Solution: The cli…

  2. Hi I wonder if anyone can help with an issue installing SCCM 2012. I have installed all pre reqs and SQL Server 2008 SP2 CU9, with a default SQL Server instance. When doing the install i am getting the error: "Setup failed to configure SQL Service Broker. Possible cause: Each Configuration Manager site must have its own SQL Server instance. Verify that the SQL Server instance is not in use by another Configuration Manager site." This happens during the: Configuring Data Replication Service. I have confirmed that SQL Server 2008 was the only install of SQL Server on the machine. I don't have the logs at the moment. I can post them later. Anyone …

  3. Started by rpo101,

    Hello - We are in the process of implementing SCCM 2012. Does anyone have any recommendations on decent application packaging products that can be used? Ideally, we are looking for good functionality at the most reasonable cost while at the same time allowing us to quickly package different types of applications. Do we even need a third party application packager or can we do everything natively w/ SCCM 2012. Any advice is appreciated. Thanks in advance..

  4. Been trying to install sccm 2012 client on our production systems. we are using only a few systems direct with no success. We did not have any issues in our test environment. The ccmsetup.log on the systems states the following: <![LOG[MP 'SCCM2012P01.allegisgroup.com' didn't return DP locations for client package with the expected version. Retrying in 30 minutes.]LOG]!><time="16:33:06.236+240" date="10-25-2012" component="ccmsetup" context="" type="2" thread="19588" file="ccmsetup.cpp:9604"> been trying to determine what is meant by client package with the expected version means. Both the domain we use is on systems as local admin and the si…

    • 1 reply
    • 5.8k views
  5. I'm having problems getting packages transfered to one of my distribution points, this is a newly built site with a central site server in our datacenter and distribution points in our two large offices. Boundaries and groups have been created and one of the DPs is running fine, the other fails to receive certain packages. The package that is causing me issues at the moment is a forefront definition package. Both DPs were built from the same template (VMware template with customisation) and followed exactly the same steps and permissions. Site status shows a critical on the Software update point on the broken DP. On the non working DP the pxkgxfermgr.l…

  6. Hello Everyone, I got a problem with the Network Access Account on SCCM 2012. I didn't have any problem previously and can deploy OS successfully. The problem started last week when I tried to deploy an OS. It gave me a error on Task Sequence then I searched for the error and found that its related with the Network Access Account. On SCCM Config Manager I checked the Network Access Account and found that I had the wrong password. But the bigger problem starts here: on configManager Administration/Security/accounts window I open my NAS properties and on the verify window tried to reach a simple network share and it says the password is wrong, then I change the password a…

  7. Good Afternoon, I have currently have SCCM 2012(thanks to your SCCM guides) setup in my test environment. However, on my production environment we currently have SCCM 2007 in production and planning on moving/migrating over to SCCM 2012 the next few months. Now, is it necessary to create a SCCM 2007 environment in my test environment to successfully test the migration? Which would mean I would have to scrap my current SCCM 2012 and start all over again.... Or should I just keep on current SCCM 2012 in test and work from there, since you can only stand up SCCM 2012 in parallel (no upgrade function) with SCCM 2007. Also, I was thinking of not using any of the migratio…

  8. Started by rpo101,

    Hi, we are implementing SCCM 2012 and we cannot extend the AD schema (is not allowed in our environment due to our size). Since SLP is no longer an option in 2012, how can I verify everything is setup so our clients do not have a problem finding our site? What replaced SLP in 2012. thanks in advance

  9. Hi, I've got SCCM 2012 SP1 running in my lab and my client polling set to a low value. In the real world I would like to see the last client policy check in time show up in my device list. Instead it shows a value that is a couple of days old. The same goes for the heartbeat value. I try refreshing the device but it's makes no difference. All I get is an old time and not the most recent one. I've even forced a client machine policy retreival on the workstation, and it still doesn't update the check time in the SCCM console. What could be wrong. It's annoying because I have one machine that is showing as having an Endpoint Protection pro…

    • 0 replies
    • 2.5k views
  10. Started by Kevin79,

    I have over 100 clients that have SCEP installed on them but SCCM doesn't show them as being managed or having them installed. How do I get SCCM to show that it is installed and managed? Is there something that I need to run on the client?

  11. Started by marlonc1980,

    Hello friends, I have this error on a secondary site server, everything was fine, but suddenly it gives me error, and reinstalled the MP, also check the permissions and the error continues wmi Severity Type Site code Date / Time System Component Message ID Description Error Milestone SLV 12/29/2012 10:48:08 AM Secundarysite.mydomain.com SMS_MP_CONTROL_MANAGER 5432 MP could not write out CCM setting to WMI. Possible cause: MP didn't get installed properly. Solution: Ensure MP setup succeeded; if not, reinstall MP

    • 6 replies
    • 10.9k views
  12. Started by Rocket Man,

    Has anyone set up SCCM 2012 SP1 beta on Sql 2012 CU3 and Server 2012 on hyper-v 2012? I am beginning to think that I should have tried it on Sql 2k8R2SP1 cu6 and server 2k8r2 sp1 and hyper-v 2k8r2. having some difficulty with the famous error 0x80070570 when trying to load in a TS to a couple of VMs. Solution: Blow away the VMs and create new ones and viola it works......sometime later try and deploy it to the same VMs after deleting the computer accounts from SCCM DB and making them unknown again and the same error occurrs....delete the VMs and re-create and all is good again. Could this be a hyper-v 2012 problem with its virtual switches? Has anyone…

  13. Started by thomash,

    Hi, We have an SCCM 2012 environment and everything is working fine. We have purchased some new laptops (HP 4540s) but I can't seem to PXE boot these. All I see is >>START PXE over IPV4. Then very very quickly what looks like some ip/server information then the following error "An error occurred with the boot selection verify media is present and retry". On occasions I will get PXE E18 timeout error. All drivers are in boot image and every other laptop seems to work fine. I've had a play in the BIOS but can't see anything to get it working. Would anyone have any clues? See attached for what I captured - filmed in slow motion and then pl…

    • 1 reply
    • 8.5k views
  14. Started by mkhan,

    I have asked the same questions in TechNet fourm but I am still waiting for the right answer. I wil be glad if you can help me. I am following up steps in http://www.windows-noob.com/forums/index.php?/topic/4045-system-center-2012-configuration-manager-guides/ to install standalone primary server in my small production environment. I stuck in creating boundaries section. I am in the process of standalone SCCM setup and configuration but I stuck on setting up Boundaries and Boundary groups I have I have four AD sites and only in one site, I have future plan to place a distribution point but at this moment, I wish to manage all clients from the primary site. On sit…

  15. Hello friends, I have a problem, whenever I add a computer to the domain, should be automatic deployment and antivirus agent sccm 2012, but not performed because I have enabled remote access to WMI as I indicated the sccm log, but this is enabled , the firewall is down, and I have shared administrative resources. My question is that namespaces should have enabled remote WMI call? and to account? Administrators?, local service?, network service?. always says Enable access WMI, which namespace I missing? attached the log sccm --------------------------------------------------------------------------------------------------------------------------------------------------…

    • 0 replies
    • 3.2k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.