Skip to content

How do I ?

Reporting, Software Updates, Asset Management, App-v

Subforums

  1. if you can create queries then you can have dynamic collections

    • 585 posts
  2. DCM, allows you to set baselines throughout your organisation to identify prohibited software or out of compliance software

    • 45 posts
  3. Creating, editing and viewing reports within SCCM

    • 978 posts
  1. Hi I want to deploy MS oofice 2007 sp3 thriough sccm. SCCM is 2007 R2. Can anyone share the detail procedure. Regards Sushain Kapoor

  2. Hi Everyone, I think this has been covered here before http://social.technet.microsoft.com/Forums/en-US/configmanagerapps/thread/3fa79201-1ab4-4636-82fc-6862620998e9/ but I cannot get an auto login for domain users to work, it always prompts for password. I have made sure application website is in trusted sites and security for domain users in IIS is set to read? My site is only using http if that's an issue, not https.

  3. Hi, Let me firts explain how i inherited this: I have a TS in sccm 2007R3 that deployes windows 7 and does the following in the bitlocker steps on standalone laptops(not domain joined after ts finishes): ( password and tpm already activated and set in bios with cctk tools) Bitlocker step: 1. manage-bde -tpm -turnon 2. reboot 3. (depending on the laptop model we must manualy press "y" to activate the tpm. In our case fujitsu laptops S781. for our dell laptops this is not requierd) 4. manage-bde -tpm -takeownership <password> 5. manage-bde -protectors -add c: -tpmandpin <password> 6. default enabel bitlocker step with default values(recovery k…

  4. Started by peled,

    Hello frinds How can i set Categories, for programs that are showen in control panel, at the clients side. We start to have lots of programs there and it start to be hard to find specific program. Thanks Peled

      • Like
    • 3 replies
    • 6.2k views
  5. Hello I am learning about SCCM 2012, I am new to the forum, is very good. My question is how I can configure a client to us they leave the office with your laptop and leave the domain and network corportativa can control with the SCCM 2012; If you connect to the internet at home for example, from the Internet; where configure this. Sorry for English I'm using a translator online, not much.

  6. Hi All, First time writer, long time reader! Looking for some advice on the following... Environment: 1 x Primary CM2012 server 1 x Site System Server (with Management Point role installed) What i am looking to do is utilise the new High Availability feature i have read so much about in the links below, so that if 1 MP goes down the other can still service clients. http://technet.micro...ibrary/hh846234 http://technet.micro...y/hh846246.aspx First of all, is this possible, and if so has anyone done this yet? Niall - I would love if you could put together a how step by step guide to clear this up (i've loved the ones to date). ;-) Secondly, i ha…

  7. Started by edie209,

    I have got my various images now working really nicely, and I have imported all the software I need to deploy. This is where I want to know what the best practice is, i have several software installs that will go to every machine, a sort of baseline shall we say and then different departments have different installs . So what is the best practice?

  8. I have managed to do this but when I schedule the TS it doesn't seem to run when I want it to. Is there a setting that changes how often the client looks to see what is required.

  9. Started by edie209,

    Title is wrong but I could not edit it I have had SCCM 2012 deploying images really well on a couple of my site machines and also got office 2010 deploying too. But I have bought some Dell Optiplex 390's and they wouldn't boot. So I downloaded the Dell WinPE drivers and added them into a WinPE boot image from the WAIK using DSIM. I then added this boot image to SCCM and distributed it and all seemed fine. I copied my windows 7 task sequence and then renamed it and changed the boot image to my new WinPE image, and deployed the task sequence to all unknown machines. Now machines are getting the F12 boot prompt and then go to Download WDSNBP .............Pending…

  10. Started by rootx60,

    I have created a wim file from capturing a system. Now I uploaded the file to SCCM server. Now I created the task, but when I try to create a task bootable media for standalone to create the iso file I get as far as when you choose the distribution points. it states 1 of 3 and I do not see the other so it tells me it cannot keep going because of that if anyone can help please let me know to help me the correct way

  11. Started by mhakeem,

    I have the following questions please reply me. 1-I am not able to download windows updates through console or server? 2-How can I discover only computers in my local subnet? Thanks Hakeem

    • 2 replies
    • 3k views
  12. Started by votequimby,

    I'm currently running SCCM 2007R3 in our environment, however we're using a combination of Excel and our old IT Asset Tracking software to keep track of Printers, Network equipment and other non-AD items. Is there a Third-Party add-on that integrates with SCCM to allow the tracking of non-AD assets? Does SCCM 2012 do a better job with this? Thanks!

  13. Started by edie209,

    Hi I have a sccm 2012 install that was working fine running on a virtual machine. Then the SAN failed and had to be completely replaced however I managed to get all the data off the SAN. I have the new SAN up and running and I have re-imported the virtual machines successfully The sccm machine however had a D drive that was a virtual drive on the SAN as a consequence I lost all shares. so I have uninstalled the distribution point and WDS and re-installed. This is giving me problems PXE booting first off I was getting PXE-T04, and now I am getting PXE-E55. Any suggestions on a way forward would be great, or do I uninstall and re-install and if that is the case how?…

  14. As the title says, the ComputerName.vbs and scripts of the like that work in 2007 do not seem to be working in 2012. MDT Task sequence, running Gather and %OSDComputerName% is being set to MININT-XXXXXX even though the computer is already known by SCCM and I'm reimaging the machine. Any thoughts? Edit: Just noticed that I could have put this thread in a better spot.. sorry about that.

  15. Started by tech_2011,

    Hi All, I am using SCCm 2007 in my company and now i want to deploy the Lync 2010 through SCCM 2007. I have one problem that we are using two OS Version 32 bit & 64 bit and Lync 2010 can't install x86 version in the windows 7 64 bit. a. windows 7 32 bit --- Quantity of users is 146 b. windows 7 64 bit --- Quantity of users is 34 ----------------------------------------------------------- Total Users 180 ------------------------------------------------------------ Kindly someone help me how i can deploy Lync in different version of OS 32 bit & 64 bit through SCCM 2007. Thanks, Tech_2011

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.