Skip to content

Deploying Operating Systems

Deploying Windows 10, Windows 7, 8.1, Server 2012R2, Server 2016 using SCCM

Subforums

  1. scanstate and loadstate, computer association, USMT backup of users data and settings within SCCM 2007

    • 1.1k posts
  2. FrontEnd HTA's, Web Services, MDT integration and more

    • 501 posts
  1. We are seeing a problem where the Windows 7 SP1 OSD wrongly exits to the Ctl-Alt-Del screen: This problem is occuring with about %25 of our Newly Imaged PCs during the Software Updates step of the Task Sequence. The only consistent error in the smsts.log is as follows: Failed to set log directory. Some execution history may be lost. The system cannot find the file specified. (Error: 80070002; Source: Windows)The Updates are 2532531, 982018, 2529073, 2732487 and do not include any Service Packs - and I have tried with "Continue on error" ticked and unticked. Also after the reboot the system is definately getting a vaid IP address. See OSD Task Sequence for where …

    • 0 replies
    • 3.5k views
  2. Hi, We have SCCM 2007 R3 and deploying Windows 7 x64 SP1 We need to Format drive with already bit locker enabled. But the task sequence failed if we have selected Quick Format. Now, If we uncheck Quick Format then Task sequence runs successfully but take longer time to full format 500 GB disk. How, can I delete bitlocker encrypted drive and Quick Format it during OSD. Thanks Prakash

  3. Good day! I have a small problem but I am sure its just because I am still learning about OSD and Task Sequence. Here is the issue: I have an HP NC6400 orginally built for XP but have worked on Windows 7 (Well until it became time to re-image) I have been able to find most of the missing drivers and test that they worked and cleared any errors out of device manager. The only one I cant seem to find it ATI-Mobility Radeon X1300, how ever I was able to install it just by right clicking and updating the driver then rebooting. Since my goal is to automate as much of the OSD process as possible I would like to have this step performed in task sequnce (if pos…

  4. Started by gatorcb,

    We installed a dp, setup a pxe point, configured multicast, adding both the x86 and x64 sccm boot images to the pxe share, added the boot and os images to the regular dp share, opened the firewall ports. What else are we missing? Is WDS required or just as a fallback? Thanks

  5. Started by burnzdog,

    Hey Guys, I am hoping for some assistance here. I am trying to install an optional language packs in Windows 7 deployment via task sequence. I have followed this guide: http://www.windows-noob.com/forums/index.php?/topic/3251-customising-windows-7-deployments-part-4/ but it fails to add the pack. I have created a package for the pack with the source pointing at: \\server\packages$\languages\ The package does not consist of a program. The language packs are located under: \\server\packages$\languages\de-de\lp-de.cab The package i created point to \\server\Language packs\. The package does not consist of a program. Any ideas where I …

    • 0 replies
    • 2.4k views
  6. Started by burnzdog,

    Hey Guys, I am hoping for some assistance here. I am trying to install an optional language packs in Windows 7 deployment via task sequence. I have followed this guide: http://www.windows-noob.com/forums/index.php?/topic/3251-customising-windows-7-deployments-part-4/ but it fails to add the pack. I have created a package for the pack with the source pointing at: \\server\packages$\languages\ The package does not consist of a program. The language packs are located under: \\server\packages$\languages\de-de\lp-de.cab The package i created point to \\server\Language packs\. The package does not consist of a program. Any ideas where I …

    • 0 replies
    • 2.3k views
  7. Hi, everyone. I have: SCCM 2012 SP1 on Windows 2008 R2 Standard I try deploy diffrent os image with no luck ( Everytime there are error 80070057 ( PC boot, make partition, but task sequence fall on "apply OS" step. In attachment smsts.log from PC. I need help ) Thanks for answers. smsts1.log

  8. Started by Orzel,

    I am having trouble with the PXE Deployment of the Win7 image I have entered in DHCP Options: 67: smsboot\x64\pxeboot.com or 67: smsboot\x64\wdsnbp.com and 66: server ip I can get to the press F12 screen However I then get the Windows failed to start (etc.) File: \Boot\BCD Status: 0xc000000f Info: An error occurred while attempting to read the boot configuration data. ]LOG]!><time="10:52:29.278-660" date="02-14-2013" component="SMSPXE" context="" type="1" thread="4820" file="libsmsmessaging.cpp:6204"> <![LOG[PXE::CBootImageManager::FindMatchingArchitectureBootImage]LOG]!><time="10:52:29.278-660" date="02-14-2013" component="SM…

    • 1 reply
    • 3.8k views
  9. I am currently having some issues with one of our Task Squences for Deploying and Capturing a Reference machine. We have not change anything in the TS except for the former SCCM Admin had his personal account not a service account capturing the system. This is the only thing we have changed. This TS is ran every month to keep our Baseline Image updated and patched. Help with locating the route of the problem or starting point I havn't thought of would be great. I have checked the package and the source files and access and have found no issues so far. Any HELP would be great!!! TS Errors: 1) 2/11/2013 1:06:21 PM Running The task sequence execut…

    • 0 replies
    • 11.2k views
  10. Started by Tjindarr,

    Hi. When i deploy a computer i use a HTA to prompt for primary user and it works when its a new computer that does not exist in SCCM. I install computer with computer name "Deploy1" with primary user "user1" and it works. i redeploy this machine with computer name "Deploy2" with primary user "user2" What happens is that "user2" is not assigned to computer "Deploy2" he is assigned to "Deploy1" and as expected "user1" is still assigned to "Deploy1" is this to be expected or am i doing something wrong?

    • 0 replies
    • 2.6k views
  11. Started by MR OCD,

    I am in the process of build & capture Windows 7 using SCCM 2012 after moving from WDS. I have sorted the OS Installer along with the boot image utilising the excellent guides on here and we can now boot into PXE and start the Windows 7 build... which then lead me to the problem of new hardware needing network drivers. So I downloaded the drivers and ran the .exe to get the relevant files to add to the driver database... so I could start creating my driver packs... unfortunately adding the drivers fails with: Error: Some driver(s) can not be imported successfully. See following details. Error: Failed to import the following drivers: • Realtek PCI GBE…

  12. Started by Jorin,

    Hello, I have troubles sending an image to a clients. I have captured an image without any problems, created and deployed a task sequence. Inserted the correct LAN driver in the boot image and updated the DP. Now I have 2 systems. A Dell Optiplex 360 and a Dell Optiplex 380. The image is being send correctly to the 360’s. But with the 380’s the pc reboots after preparing network connections in winpe. I don’t understand why this is happening. I tried to find the log files on the 380 but I can’t find them.

  13. Can someone help create mandatory advertisement to run a task sequence using a script? Environment is SCCM 2007.

  14. I've been working on this for about a week and can't figure it out. I'm trying to deploy Windows 7 with a couple applications and everything looks good up until the part it should be installing the applications. It completes and lets me log on with my domain account, but not with the local Administrator account, even though I configured the task sequence to enable that account and gave it a password. Once logged in, I see that no applications were installed and no Config Mgr client either. I see that it has given the hard drive label, OSDisk, Applyed Org Name, joined the domain and put the computer in the proper container, and has applied drivers. Most of the driv…

  15. Started by 2nutz4u,

    My Current Setup: Windows 2008 R2 SCCM 2007 fully patched as of 12/4/2008 MDT 2012 update 1 USMT 5.0 Goal: I am trying to do a refresh from windows 7 x64 to windows 8 x64 using USMT to retain data for domain accounts via hardlink and offline. Issues: Everything works except the data is not migrated over. Notes: From what I read but could be wrong MDT 2012 update 1 has out of box for hardlink process. Do not have to create custom batfiles and vbs script. Snip from my log: Value = TRUE TSManager 12/3/2012 4:48:22 PM 1196 (0x04AC) Operator = equals TSManager 12/3/2012 4:48:22 PM 1196 (0x04AC) Expand a string: equals TSManager 12/3/2012 4:48:22 P…

    • 6 replies
    • 7.2k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.