Skip to content

Deploying Operating Systems

Deploying Windows 10, Windows 7, 8.1, Server 2012R2, Server 2016 using SCCM

Subforums

  1. scanstate and loadstate, computer association, USMT backup of users data and settings within SCCM 2007

    • 1.1k posts
  2. FrontEnd HTA's, Web Services, MDT integration and more

    • 501 posts
  1. Started by Kevin79,

    I have MDT set up at 15 locations. They all use the same basic image but put the computers in different OUs, set the time to different time zones and different languages. I currently have local IT support that applies the images but the Task Sequence has a user built in to it that has rights to create/add the computer the AD. Is there a way to have OSD in SCCM ask the user for the computer name, OU (with a drop down), Time Zone (with a drop down, or default based on IP address) and Language (with a drop down, or default based on IP address)? I don't want to give the local IT support rights to SCCM to add the computer manually nor do I want to add more steps for them. …

  2. Started by ThomasBNewcastle,

    Hello thanks for reading my post trying to get a build and capture working on my test VM lab with out much joy From what I can see from my logs (attahced) the drivers are not installing - but the PC boots into Windows and all drivers are installed I also seem to have a number of errors thank you for any advise wpeinit.log smsts-20150209-112234.log smsts.log

      • Like
    • 1 reply
    • 4.4k views
  3. Has anyone run into a problem where the config mgr client stays stuck in provisioning mode after the TS completes? I currently have a couple scripts that force it out of this mode during the TS, but it causes the windows updates to fail to install at the end of the TS. If i take the scripts off, Windows Updates install, but then the client stays in provisioning mode and doesnt register with the CM.

  4. Started by JTPort,

    Hi, Really easy question to answer I'm sure. How do you pass the variables for OSDJoinAccount and OSDJoinPassword from UDI to the assocatied Task Sequence. Do they both need percentages on them when you enter them into the apply network settings, username and password boxes? Thanks

  5. Hello I am running SCCM 2007 R3 on Win Server 2008 Standard (32 bit) , Windows 7 x85 and x64 for the clients. MDT 2012 SP1 integrated. I have successfully created a UDI TS to install Windows 7x86 & x64 including multiple driver packages for various models (Fujitsu, Dell) The TS works fine, the applications are discovered and auto selected for reinstall during a refresh however I have one issue. When the TS completes and the OSDResults runs, I get a blank Applications installed tab (See attached). I have tested this on 20 machines so far and it is consistent. Everything seems to work, just would like to have this nice feature if things fail to get the error codes. …

  6. Started by mqh7,

    Our CM2012 OSD works for all of our Dell hardware except the Dell E6420 laptop. In have two E6420's at my desk and both fail in the same way at the same time. You PXE boot up and it prompts you for the DP password. Then it prompts you to choose a TS. We only have one TS so I pick that and it does resolve all packages. But then it does on the 3rd step within the TS. "Use Toolkit Package" This is our MDT toolkit package that works on all Dell hardware except this E6420. Here is part of the SMSTS.LOG I know this package is there and it does work since all other hardware uses it. Why would it not work only on this one type of hardware? S…

  7. Started by oxyle,

    Dear IT'ers, A friend of mine ran into an error that is getting really annoying right now. Every time when we install hes lab environment, we keep running into 0x80072ee7 during an OSD deployment. We've done the following: Reinstall the whole environment from scratch. Install a single stand-alone primary site. We've verified the DNS records were made. We've applied CU3 to SCCM before doing anything else in the console. Applied boundary groups Installed the PXE role, and verified that WDS was running. Now when we start a clean Hyper-V Gen1 machine with a legacy NIC we run into the error above... The VM gets an IP...(During networkboot) The VM can ping everyt…

    • 1 reply
    • 4.6k views
  8. Started by oloco,

    Hi guys. I'm just starting learning to manage SCCM. I have been playing with it since three days ago, and Im really fascinated with all it's capabilitys. Now I'm learning how to deploy a Operating System. Everything is working fine, but I have a doubt regardin the security: Once that all the needed files have been deployed to the client machine, and the sequence task has been configured to automatically join to a domain... where are the domain admin credentials stored? I mean... I think that in some way the client needs to use the credentials that we have already configured them in the wizard. In my company we are using SCCM for deploying OS. The use a HTA scr…

    • 0 replies
    • 2.5k views
  9. Started by mmarinb,

    Hello: I am trying to capture an installation of Windows 7 Professional x64. It was installed with only one big partition for both boot and OS. I need to capture it and save it to a WIM file for OS deployment. The process starts OK. It makes the sysprep and then restart. When restart is done, it starts the process scanning the volume, then start to capture and captures just a little more than 200 MB and then the machine restarts with no message. Where can I find the log? It obvious that the capture fails, but I would like to know when and how fails. I hope you can help me. Thank you in advance.

    • 2 replies
    • 3.5k views
  10. Started by Sighlent,

    Environment. Server 2012 running SCCM 2012 R2 (upgraded from SP1), PXE booting a Task Sequence that originally pushed out Windows 8 but has since been copied and changed to install 8.1, All client machines run 64bit and work well "except" for the Lenovo Carbon X1 UEFI boot machine. (This machine did successfully PXE install an image after adding the USB to Ethernet adapter driver to the boot image but has since stopped working). We have one site server with itself as the DP. The machine will PXE and then fail at a random point after that, always with 80070002 error code and always before the Apply OS Image step. I have tried a copy, and a new, Task Sequence but as…

    • 2 replies
    • 4.3k views
  11. hi I'm using sccm2012r2 in order to OS deployment in my network. but I don't know how to config task sequence in order to ask user about installation drive and computer name and ... because the first time I run that task sequence ,it partitioned all disk to one drive called D . what happen for other drive in the disk after installation .do they remain after installation with this method? is there any solution to interact with user in osd ?

    • 2 replies
    • 4.9k views
  12. Is there a way to test a package without having to actually do the build using the same context as if you were running the task sequence on existing build? You could launch litetouch.vbs from within the MDT to then run a simple task sequence. Gives you an idea if it will work prior to running through a whole build. Anything similar to this? Thanks.

    • 2 replies
    • 3.9k views
  13. The other week I went to add the Powershell module to our Boot Images We encountered an error trying to do that, so we gave up, and built new boot images just to be safe. After doing so, and triple checking everything was exactly as had been previously, we now have one specific model of computer that won't pick up advertisements. We have repeatedly confirmed the computer entry is in the collection, we have removed and re-added the computer and re-added it to the collection, yet it still will not pick up the advertisement. We have done this multiple times with multiple computers of the same model, all with zero success. I give up. Hive-mind, help!

  14. Started by mlbriggs24,

    I need to refresh clients in a classroom environment every 3 months to ensure compliance and keep drift under control. I am not sure whether I need to use OSD or Multicast for the deployments. Does anyone have a chart or list of the Pro's and Con's of each?

  15. Started by aleinss,

    A little background: I started off with SMS 2003 back in 2006, upgraded to 2007 shortly after and just within the last 2 weeks up to 2012 R2 now. I've been the SCCM administrator at the same company for the last 8 years. Is it me or does OSD seem to suck royally in SCCM? We tried to make a go of it back with 2007, but found the process too error prone. It would take about 20 steps or so to image a computer and sometimes it won't image a computer at all due to some duplicate GUID issue. I went with a straight ImageX solution and life was much simpler and easy. More recently, say in the year 2011, we switched to MDT 2010 for Windows 7 deployments. MDT is so easy…

    • 0 replies
    • 4.5k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.