Skip to content

Deploying Operating Systems

Deploying Windows 10, Windows 7, 8.1, Server 2012R2, Server 2016 using SCCM

Subforums

  1. scanstate and loadstate, computer association, USMT backup of users data and settings within SCCM 2007

    • 1.1k posts
  2. FrontEnd HTA's, Web Services, MDT integration and more

    • 501 posts
  1. Hi guys, First of all thanks for all the fantastic guides and information on this site. It’s saved me countless hours and grey hairs. I've got a bit of a problem with regards to multicasting and I’m hoping someone out there might have come across this issue before and know the solution. I've followed all the guides and setup a 2008 R2 server and configured it as a DP and a multicast service point. The ‘site status / component status’ looks fine and so do the logs on the multicast server, but when I try to send out anything via multicast (eg winpe or an OS Image) it fails to start the multicast session and the smsts.log shows the following error: ….. Performing multic…

  2. I am current trying to build and capture a WIndows 2008 R2 image. I am currently running SCCM 2007 R2. My first version of the TS was just a vanilla TS with minimal steps to minimize complications. It installed the OS from an OS install package and captured the image without issue. I then added a step after the "Setup Windows and ConfigMgr" step to install updates. The updates install as expected and the computer reboots to a black screen where it applies the updates. Then the machine reboots again, I get a flash ( I am assuming that this is where the error is occuring ), the machine reboots and I get the initial configuration screen for Windows 2008. I have chec…

    • 1 reply
    • 3.1k views
  3. Hello all, is it possible to run a command line or bat file when deploying windows7 in winPE mode? tnx Lrok

  4. Started by TimN_FL,

    We have just started to use SCCM 2007 r2 ( working on the upgrade to r3) to build and deploy a Windows XP SP3 image to a number of lab environments that we have setup. The deployment process works completely as expected. Its the build process that we are having a problem with. We would like to keep our Images fairly up-to-date by "rebuilding" the images monthly after new updates have been incorporated after patch tuesday. The problem that we are having is that the build process takes so long. Our last build took about 12-13 hours to complete which seems excessive to me. We are building from scratch each and everytime using installation media and not the previous wim. We f…

  5. I want deploy windows XP wim image to my brand new client machine .i completed all other setups except task sequence. what are setups i need to added in the task sequence for deploying winxp image in my client machine

    • 1 reply
    • 2.6k views
  6. I was wondering if anyone has built a reporting tool that puts a report local on each computer after imaging? I would love something that placed a txt file or html file on the desktop of the account logged in after imaging or on C:\. I would like to see if a program failed to install becase of some reason and I don't want to go into the console to find out what computer it was. Thanks, Jason

    • 1 reply
    • 3.3k views
  7. Started by bman,

    I am deploying Windows 7 with SCCM and when I specify a driver package under Apply Drivers I get an error installing the OS that a package referenced by the task sequence is not available. When I use Auto Apply Drivers it works? Is it a permissions issue?

    • 2 replies
    • 4.4k views
  8. Started by maktoum,

    Hi everyone, I configure PXE service as the attached image ... I want know if I enable unknown computer support option and advertise OS task sequence to All unknown computer collection is that mean the Task Sequence will running on the machines without restart it and pressing F12 ??? I'm afraid the task sequence run on servers.... Thanks

  9. Hi There! I installed a SCCM 2007 R3 in a test Windows Server 2008 R2 Domain, I configured without problems all the setting of SCCM 2007, including Software Update Point, State Migration Point and so on. I tried to test the process of refreshing a Windows XP Machine to Windows 7, using the Operating System Deployment functionallity of SCCM 2007 R3, WAIK 2.0 is installed in the SCCM 2007 R3 Machine, I can generate a Package of USMT 4.0 without problems. I Generate a Capture Media using the Create Task Sequence Media Option in SCCM 2007, burn it to a CD an use it to capture a Windows 7 image from a reference Computer with a fresh install of Windows 7, this computer …

    • 1 reply
    • 9.8k views
  10. The title is vague, but here is my dilemma: We have XP Pro .WIM images that have been captured, but they were not sysprepped and do not have the sysprep folder present. The problem is that these images cannot be rebuilt at this time. I can use SCCM to image them, but I receive and error at the end. Configuration Manager is looking for the sysprep folder. Can I implement a task within the task sequence that would send the sysprep folder to the C:\ drive before Configuration Manager setup runs? But obviously after the image is applied.... ?

  11. I am doing some proof of concept in our test lab for OSD in ConfigMgr 2007. Everything else works fine. There are no speed issues on the network. Other file transfers during WinPE have no issues. However, the capture sequence takes 3+ hours for a 3GB image. I've tried to capture using network shares on two different servers with the same results. Despite what the log suggests, I suspect there's a feature or configuration issue on the DP that the sequence is looking for but not finding. If you watch the network activity, it's long periods of nothing followed by a short burst of slow transfer. Eventually the .wim is created and I can deploy the image with no …

    • 4 replies
    • 6.8k views
  12. Started by VMixture,

    Sorry only my 2nd post here so please feel free to merge or point me to an existing thread. Im reasonably new to SCCM but have a quite decent understanding, ive captured and deployed operating systems and deployed software through RAP from AD group membership. My question is to do with OSD. Ive been working in an environment of many different models of hardware for the client machines. My procedure has been to install XPSP3 along with all updates and drivers on EACH type of machine and capture the image and then name it according to its type IE HP7900SFF etc. Obviously ive collected a number of 'operating system images' but the process seems to work if not bei…

    • 1 reply
    • 3.9k views
  13. Hi, I have followed the guide properly. configured everything. Created a boot image and added nw drivers to it.ccmsetup is successful on the client. Setup:SCCM 07 R2 on Windows Server 2008 Issue: 1.When the task sequence starts on the client machine,Windows PE boots. 2.Formats the drive. 3.Apply operating system stage starts and then ends up in error 0x80070002. -I have checked the network access account.Tried to set it to SMSread as well as the Administrator account. -I thin k it might be a driver related issue.So i added Intel Pro drivers for my VM's.Added Win PE drivers for HP and Dell machines available at their website(Im also running the same on Dell Prec…

    • 2 replies
    • 3.4k views
  14. Started by althurm,

    Hello All, Currently we have a custom .wim file on our install disks that we use to deploy on our machines (using imagex.exe from command line ). We have a license agreement w/ Microsoft that will enable us to include these install disks to our customers who buy our machines. Before we do this we would like to investigate ways to encrypt or password protect the .wim file that is on the disk just as protection against pirating. Does anyone know of any methods or tools for encrypting or protecting the .wim file?

    • 0 replies
    • 4.8k views
  15. Hi. I created already some task sequences without any issue. But since yesterday, It’s no longer possible to deploy a task sequence. We can create a new task sequence, but the deploy button on the ribbon, as well as the deploy option on the menu are grayed out? Peter

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.