alewoodrum

i haven't done that, but sometimes adding a restart after the system is built helps, before adding an application. I think i had to do that when deploying flashplayer or something like that. just an idea.

i just had some issues capturing an image from win 10 1709 and turned out to be the computer name was longer than 15 characters. when i changed the name to something shorter it worked.

i had the same error : Failed to send HTTP request. (Error at WinHttpSendRequest: 0x80072ee2) ccmsetup 1/18/2018 2:59:24 PM 5776 (0x1690)Next retry in 10 minute(s)... it really means a server time out. After further checking it turned out to be Endpoint (antivirus) installed on the host server. My SCCM server is also a VM.

thank you, i finally found the program that was blocking it. It was McAfee endpoint security installed on the host where i have sccm as a VM. I didn't think that would affect the VM but it did.

i am getting similar messages but using only http: Failed to get client version for sending state messages. Error 0x8004100e ccmsetup 1/18/2018 2:53:01 PM 14988 (0x3A8C) [] Params to send '5.0.8577.1000 Deployment Error: 0x80004004, ' ccmsetup 1/18/2018 2:53:01 PM 14988 (0x3A8C) Sending Fallback Status Point message to xxxxxxxxxxx', STATEID='306'. ccmsetup 1/18/2018 2:53:01 PM 14988 (0x3A8C) <ClientDeploymentMessage ErrorCode="-2147467260"><Client Baseline="1" BaselineCookie="" Platform="2" Langs=""/></ClientDeploymentMessage> ccmsetup 1/18/2018 2:53:01 PM 14988 (0x3A8C) sending with winhttp failed; 80072ee2 FSPStateMessage 1/18/2018 2:53:22 PM 14988 (0x3A8C) State message with TopicType 800 and TopicId {4F42D607-E268-4796-A9A9-F294192C52D1} has been sent to the FSP FSPStateMessage 1/18/2018 2:53:22 PM 14988 (0x3A8C) Failed to connect to policy namespace. Error 0x8004100e ccmsetup 1/18/2018 2:53:22 PM 14988 (0x3A8C) Failed to revoke client upgrade local policy. Error 0x8004100e ccmsetup 1/18/2018 2:53:22 PM 14988 (0x3A8C) 'Configuration Manager Client Retry Task' is scheduled to run at 01/18/2018 07:53:22 PM (local) 01/19/2018 12:53:22 AM (UTC) time with arguments ' /RetryWinTask:1'. ccmsetup 1/18/2018 2:53:22 PM 14988 (0x3A8C) Folder 'Microsoft\Microsoft\Configuration Manager' not found. Task does not exist. ccmsetup 1/18/2018 2:53:22 PM 14988 (0x3A8C) Successfully created task 'Configuration Manager Client Retry Task' ccmsetup 1/18/2018 2:53:22 PM 14988 (0x3A8C) CcmSetup failed with error code 0x80004004 ccmsetup 1/18/2018 2:53:22 PM 14988 (0x3A8C) MapNLMCostDataToCCMCost() returning Cost 0x1 ccmsetup 1/18/2018 2:59:03 PM 5776 (0x1690) GET 'HTTP://xxxxxxxxx/CCM_Client/ccmsetup.cab' ccmsetup 1/18/2018 2:59:03 PM 5776 (0x1690) Failed to send HTTP request. (Error at WinHttpSendRequest: 0x80072ee2) ccmsetup 1/18/2018 2:59:24 PM 5776 (0x1690) Next retry in 10 minute(s)... ccmsetup 1/18/2018 2:59:24 PM 5776 (0x1690)

Thank you. I think I am not going to skip managing locally the updates.

We are part of a bigger forest on ADUC and central offices have their own WSUS, could I skip the WSUS installation on my sccm standalone server?

I am experiencing the same problem now. I am running SCCM 2012 SP2 CU3 and it just fails loading the network drivers. I have been reading and it seems i need to uptade ADK. I am running windows boot 10.0.10586 and deploying windows 10 for education 1511. I am not sure if i need to update adk first and then apply a hotfix 3143760 or not.

it is working now.

I am pretty sure it is the right one. I was also running ADK 8.1 and it had been working but today I updated to ADK 10.0 and hope that will help.

i am having the same issue here with DELL optiplex 5040, it is not installing the network drivers during OSD. After bringing the system up i can put the same drivers on a stick and it will install them and work, but fails on deployment. I have injected the DELL drivers for boot image also. At the beginning it wouldn't start the task sequence because of drivers, so i injected them on the boot.wim but now it is not installing them on OSD. I have also extracted a newer version from intel prowim64 and put them on a package and send them for OSD and still nothing :-( very frustaded. Forgot to mention i am running SCCM 2012 SP2 CU3

i used the Nic drivers from intel. check the nic manufacturer. But in my case, the workstation didn't have an IP. Check on storage drivers.

I deploy windows 7 sp1 and windows 8, as Jorgen said, you don't need to put a key for the operating system, by default if is doesn't have a key, the KMS server will activate it. However you could put the default KMS client key on your Task sequence, on windows settings: Operating system edition KMS Client Setup Key Windows 7 Professional FJ82H-XT6CR-J8D7P-XQJJ2-GPDD4 Windows 7 Professional N MRPKT-YTG23-K7D7T-X2JMM-QY7MG Windows 7 Professional E W82YF-2Q76Y-63HXB-FGJG9-GF7QX Windows 7 Enterprise 33PXH-7Y6KF-2VJC9-XBBR8-HVTHH Windows 7 Enterprise N YDRBP-3D83W-TY26F-D46B2-XCKRJ Windows 7 Enterprise E C29WB-22CC8-VJ326-GHFJW-H9DH4

I think i have seen that message too. And it might very well happened with the Dell optiplex 7010. we deployed a bunch on them with windows 7 32bit. However i don't remember how we solved it. Almost every time we deploy a new model we face some troubles. I would check on your 64bit boot image, even if you are deploying x86, the 64bit needs to be distributed as well.

Yes indeed it was the drivers. I did the F8 and it didn't have an IP. So after downloading all kind of drivers from DELL and INTEL , it finally worked. It didn't work with DELL drivers, I ended up downloading the intel PROWIN64 and updloading all drivers on SCCM and then select the one for the specific NIC I217 and added it to the boot file and voila!

I am having the same issue with a laptop DELL Latitude E5540. It downloads and starts windows PE and then it starts SCCM screen but it never shows or download the TS. It just stays there and then reboots. I am running SCCM 2012 SP1.

i had that problem when using the wim image from the installation dvd. the best practice is run a build and capture ts and use that image to deploy. For build and capture you can use the installation cd wim image by the way.

if they don't have the client they won't show on all desktop and server clients. How did you imaged them?

honestly I didn't mean to. When i was downloading on the volume license center i saw the sql 2012 sp1 and i thought that would skip getting the cumulative updates . that's what you get for assuming things. But of course Microsoft logic is not like my logic :/

have you tried disabling the step "Restart" on the task sequence and just pxe boot the workstation and start the task sequence without the restart?

i am running sccm 2012 sp1 with sql 2012 sp1 .

what boot image are you using on the task sequence ? are you booting with the image assigned to the task sequence? or the currently installed default operating system?

i am getting those 2715 status messages too. and: Inventory Data Loader failed to process the file C:\Program Files\Microsoft Configuration Manager\inboxes\auth\dataldr.box\Process\H214KJAB.MIF because it is larger than the defined maximum allowable size of 5000000. Solution: Increase the maximum allowable size, which is defined in the registry key HKLM\Software\Microsoft\SMS\Components\SMS_INVENTORY_DATA_LOADER\Max MIF Size (the default is 5 MB), and wait for Inventory Data Loader to retry the operation.

it might take some time. Did you change the hierarchy settings to do an automatic client upgrade?

can you use a different network account? in case it is caching the old password. or erase the account and use it as a new account when setting it?