Skip to content

Deploying Operating Systems

Deploying Windows 10, Windows 7, 8.1, Server 2012R2, Server 2016 using SCCM

Subforums

  1. scanstate and loadstate, computer association, USMT backup of users data and settings within SCCM 2007

    • 1.1k posts
  2. FrontEnd HTA's, Web Services, MDT integration and more

    • 501 posts
  1. I have looked every where for an answer to this problem and I have not had any luck. I upgraded from SCCM 2012 SP1 CU3 to SCCM 2012 R2. Since then I have had issues with my OSD Task Sequence. I already recreated the images and redistributed them. I have deleted the task sequence and recreated it as well. I just want to be able to deploy an image to an unknown computer without having an issue. I get the task sequence failed with error 0X8007000B, and if I try to PXE Boot again after that fails, I then get PXE boot aborted......selected boot device failed. Press any key to reboot this system. I have been pulling my hair out for the last week trying to figure th…

    • 1 reply
    • 5.4k views
  2. Started by vikrammidha,

    Hi, I am facing winpe error in OSD. It gets to the point where user presses the F12 key and it starts loading the file, finally it goes to the screen showing WINPE is initializing and windows is starting but goes blank after that. I thought this would be a driver issue and imported some network drivers but when trying to create a driver package, it says "some drivers cannot be imported". Please assist.

  3. Hi All, Could somebody please help me out on an issue that we currently have with SCCM 2012. Our Service Desk team has no access to the SCCM console and they push out software by placing the machine into a security group which works really well. The problem that we have is when it comes to re-building the OS on a machine, we want them to be able to do the same as the software deployment We understand that we can set the always re-run, however this puts the machine into an endless re-build loop. At the moment we are deleting machine records from SCCM so that the machine gets picked up as an unknown, this is not very good for our remote sites as there is…

    • 1 reply
    • 2.9k views
  4. hello folks, I have a question. I am new to sccm 2012 os deploying but learning very quickly......I have created a standard task sequence to deploy the default windows 7 image, install adobe, java and office no problem... I am trying to capture an image now and this is what I am doing. I added a task sequence step at the end of the default standard task to capture....... my question is, can I install an application manually during a capture phase ?? I have tried pausing the task sequence but I don't know how to install the app. I was expecting when I pause the task seq at the end that I would get the desktop at the end and install the application before the fi…

  5. Started by sssebaaa,

    As we know HP drivers are distributed as exe file. We are able to extract files form exe file using 7ZIP. If I install exe package, there is a lot additional files installed in eg. c:\program files(x86)\intel\..... While I use DoubleDriver software to backup all drivers these additilnal files are not copied. Probably they are not required by driver. Archived driver is easy to import to SCCM driver package. Ther are only required files. Is it better ether to import these archived drivers to SCCM without many additioanl files or instrall drivers from exe file? The second option is possible after extract the driver by 7Zip and then run setup.exe -s. Regards…

  6. I seem to be getting a fairly common generic error but with possibly with a slight difference then some of the other problems/answers I have seen. Generally it looks like this is a DNS issue but I am not sure in my case. Let me 1st describe my infrastructure and what I am trying to accomplish. We use PKI on the main MPs/DPs. I have another DP that I will use for OSD content that won’t use PKI. I am 1st attempting to use boot media, vs PXE, to image a computer. I have distributed the content to the DP, created a boot media USB and everything looks good there as far as I can tell. My boot media selects the PKI MP and we have created the client cert and I direct it…

    • 0 replies
    • 5.3k views
  7. Hello, I am migrating my company Xp OS to windows 7 Professional, when you've already migrated as 20 machines but the problem is appearing in a couple of machines that I want to migrate the specified error is: Unableto make change to your software None of the applications you tried to install began installation succesfully. Investigate the reason for the installation failures and then try to the applications again. Click OK to return to Software Center. Please help me

    • 1 reply
    • 3.3k views
  8. Started by maxxmc,

    I have a batch file that will add local administrator account along with password, also sets the account to never expire. I have a SCCM 2012 OSD task sequence job setup, how do I add this batch file step to my existing task sequence. I know it it will be a command line but where do I put the step to apply it in TS?

  9. Question on setting up multicast? What kind of bandwidth chatter do you guys see when turning on SCCM 2012 R2 multicast for image deployments? My network guys are not wanting to turn on multicast on the router/switches because they say it causes too much traffic network wide. Do you guys see this as an issue? We've discussed putting a DP at each of our 20 remote sites, they have 100MB connections but we're saturating those with only a few non-multicast deployments running at one time. So why would multicast cause more traffic when that's what we're trying to avoid? How do you guys deploy images to 30+ computers at a time without saturating your ne…

    • 0 replies
    • 5.4k views
  10. I would like to deploy the Windows 8.1 Enterprise update to our Windows 8 Enterprise clients using SCCM. In testing it has been straight forward to deploy the update as an application by calling setup.exe /auto:upgrade and then leaving it to do the install. After a reboot Windows 8.1 is ready to go. My issue is that this leaves Windows needing activation, and to activate it I need to change the product key to our Windows 8.1 MAK key. I don't know how to achieve this using SCCM, so I was wondering whether people had any suggestions. I have considered the following approaches: Installing it via a task sequence. Issue here is that the 8.1 installation process re…

    • 2 replies
    • 6.7k views
  11. Hi, I am deploying Win 7 operating system, customized with Drivers and Softwares, The installation is going fine, the size of the Image is close to 15GB and i am using a 32 GB USB pendrive for installation. Everytime i have to modify anything on the Task sequence i will have to recreate the image and again copy it from the servers in DC, this takes almost a day. Is there any way i can edit the Task sequence within the Media created earlier so that it can save a lot of time. Thanks for response.

    • 2 replies
    • 8.6k views
  12. Started by KeithDib,

    Hi I am trying to deploy Windows 7 [and poss XP] to VMs running on eSXi. I have the VMWare drivers etc set up and have a dedicated TS and PXE boot image. The VM boots to the PXE server fine and also sees the image, so drivers are good. My issue is, that during the TS tesitng to find the packages it cannot see any, including the SCCM client install package.

    • 0 replies
    • 2.6k views
  13. i seem to be having trouble getting the task sequence to run on our engineering specific model of desktop, Dell Precision T3600 with Windows 7 x64. they are being ordered with two 500GB drives and for some reason i cant seem to get the task sequence to complete. i did however finally get the machines imaged by physically disconnecting one of the drives as we had 200+ machines come in for a departmental PC refresh. now i really want to backtrack and see if i can get the image to work with both drives connected. i am still very new at SCCM so i am struggling with the most basic of tasks, however, i have enjoyed learning and love working with it! I honestly dont real…

  14. Hi I am having trouble trying to capture an image of a machine. I have used a Build and Capture TS and that works fine. But what I want to do now is perform a manual capture of the machine. I thought I could just go ahead and create a custom task with a capture step. But for some reason it's not working and I keep getting an error. Am I doing something wrong? Thanks

  15. Started by KeithDib,

    Hi Guys We are running OSD from SCCM 2007, sometimes we need to image using F12 PXE and sometimes we use a Manditory TS Now if passworded it needs this on both options is there a way to Password only the PXE boot and not password the manditory TS phase? cheers

    • 5 replies
    • 4.1k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.